How to Replace Car Rearview Mirror Glass?

How to Learn the Methods and Techniques of Riding a Motorcycle

First, familiarize yourself with the motorcycle. Get on and adjust to it, checking the brakes, clutch, transmission, and other functional parts. Start the motorcycle, gently apply the throttle to prevent stalling, and hold the clutch without releasing it. Shift into gear. For beginners, it's best to start in first gear. After shifting, apply the throttle and release the clutch to complete the motorcycle's start, then gradually get a feel for it.

2

3

Share

What happens if you don't sign after passing the Subject 1 test?

If you don't sign after completing the Subject 1 test, it may affect your practice for Subject 2. To ensure your score is properly recorded, you need to collect and sign the score sheet after the test. You can first go to the driving school or driving test center to practice Subject 2 and then make up for the signature of the Subject 1 test. Article 46 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" stipulates: The score sheet for each subject must be signed by the applicant and the examiner. No motor vehicle driving license shall be issued without signatures. Notes for the Subject 1 test: Regarding glasses: If you wore glasses when taking the registration photo, you must wear glasses when signing the agreement and taking the official test at the vehicle management office. Regarding signatures: For formal files and score sheet signatures, the name must be consistent with the ID card, and the font must match the one used during registration. No tracing, modifications, or signing in the wrong position is allowed. For the mock test, you must bring your ID card. The score must be visible to the instructor, and the trainee must sign their name, date of birth, and score on the score sheet. The font must be clear. If the font is too illegible or contains errors, the score will be invalidated.

7

1

Share

How to know if the sunroof of the new Excelle is fully closed?

To open the sunroof, briefly press the switch, and the sunroof will open automatically. To stop the movement, press this switch again. If you want to close the sunroof, you need to press and hold the switch for a long time until the sunroof is closed. The sunshade is manually operated.

6

5

Share

What is the normal pressure for adding refrigerant to a car?

Standard refrigerant pressure for car air conditioning: 1. When the compressor is running at 1500-2000 rpm, the high pressure (discharge pressure) should be around 1.5-2.0 MPa, and the low pressure (suction pressure) should be around 0.15-0.35 MPa under normal conditions. The exact values depend on the specific vehicle's air conditioning system configuration and ambient temperature. 2. At idle speed (engine 700-900 rpm), if the ambient temperature is high, such as under direct summer sunlight, the high pressure may be slightly higher, reaching up to about 2.5-2.8 MPa, but generally should not exceed 3.1 MPa. Introduction to car air conditioning refrigerant pressure: 1. The so-called car air conditioning refrigerant is commonly known as Freon, also referred to as "refrigerant" or "coolant" in the market, which is divided into environmentally friendly types (R134a) and non-environmentally friendly types (mainly F12). 2. The refrigerant pressure gauge, also known as a refrigerant meter or Freon gauge, is used to measure the current pressure of the refrigeration system. It is mainly used to detect the pressure values of the refrigerant at different stages of the system, allowing operators to understand the operating condition of the equipment. Currently, the accuracy requirement for refrigerant pressure gauges in China is to reach 2.5 grade.

3

5

Share

How to Turn On Low Beam and High Beam for Manual Transmission Cars?

After getting into the car, observe the steering wheel. The switch for switching between low beam and high beam is usually located on the left side of the steering wheel. Flipping the switch up and down changes between low beam and high beam. Generally, pushing it down turns on the high beam, pushing it up turns on the low beam, and lifting it up again also turns on the high beam.

6

4

Share

How to Identify a Fake Yamaha Ciao?

Check the engine nameplate, there is an aluminum part with E-K-K letters next to it, and the exhaust pipe heat shield plastic part is printed with YAMAHA letters. The original instrument panel has a circular trident Yamaha logo inside, and even after ten years of use, the plastic color of the shell will not turn yellow. The front of the genuine Ciao's large plastic panel has a trident Yamaha logo.

7

0

Share

How to Replace Car Rearview Mirror Glass?

How to Learn the Methods and Techniques of Riding a Motorcycle

What happens if you don't sign after passing the Subject 1 test?

How to know if the sunroof of the new Excelle is fully closed?

What is the normal pressure for adding refrigerant to a car?

How to Turn On Low Beam and High Beam for Manual Transmission Cars?

How to Identify a Fake Yamaha Ciao?

How to Repair a Motorcycle Battery Left Unused for One Year?

How to Switch the Dashboard Display on Geely Xingrui?

How to Claim Compensation for a Total Loss Vehicle?

How often should the spark plugs of the X-Trail be replaced?