How to Replace Brake Pads with an Electronic Parking Brake?

Which part of the vehicle is controlled by the pull switch?

The pull switch controls the left and right turn signals of the vehicle. Direction: Pulling up activates the right turn signal (clockwise direction, corresponding to turning the steering wheel to the right); pulling down activates the left turn signal (counterclockwise direction, corresponding to turning the steering wheel to the left). Turn signals: Turn signals are the primary devices indicating a vehicle's dynamic information, installed at the front and rear of the vehicle. They are activated when the vehicle turns, providing safety for driving. For safety, please use turn signals as required to inform others of the vehicle's movement in advance, allowing them to make correct judgments. Scenarios for using turn signals: When overtaking, first activate the left turn signal, then the right turn signal after overtaking. When entering a highway, use the left turn signal. When exiting a highway, always turn right. No need to use turn signals when entering a roundabout, but activate the right turn signal when exiting. When parking by the roadside, use the right turn signal. When leaving the roadside, always turn left, so use the left turn signal. For U-turns, generally turn left, so use the left turn signal. For changing lanes to the left, use the left turn signal; for changing lanes to the right, use the right turn signal. When preparing to turn, activate the turn signal in advance to give following drivers time to react.

16

1

Share

What does the Sagitar dual-clutch mean?

Here is the meaning of the Sagitar dual-clutch: The dual-clutch transmission (DCT) is a type of semi-automatic transmission that uses two sets of clutches, each responsible for shifting between even or odd gear ratios, significantly improving shift speed. It is a transmission mechanism that can both transmit and cut off power. The function of the dual-clutch transmission is primarily to ensure smooth vehicle starts, reduce the impact load on the transmission gears during gear shifts, and prevent the drivetrain from overloading. In conventional vehicles, gear shifts are achieved through the engagement and disengagement of the clutch, which results in a temporary interruption of power transmission during the process.

11

2

Share

Where is the Fuse for the Beidou Star Power Window Located?

The maintenance methods for car window glass lifting are: 1. Cleaning: Regularly clean to keep the windows clean; 2. Lubrication: When the oil in the lifter is exhausted, remove the inner cover and add sufficient oil; 3. Maintenance Agent: Spray oil on the window gears and apply maintenance agent to the rubber. The window is an important part of the entire car body. According to the different installation positions of the glass, there are: front and rear windshields, side windows, and door windows.

5

Share

How many liters can the Chenglong H5 fuel tank hold?

The Chenglong H5 fuel tank can hold 350 liters. Relevant information about the Chenglong H5 is introduced as follows: 1. Equipment: The Chenglong H5 is equipped with a 350-liter aluminum alloy fuel tank, which is lighter in weight and can help reduce the overall weight to some extent. The aluminum alloy air storage tank, battery, and urea tank adopt a very compact layout, leaving more space for modifications on the side. 2. Speed: According to the tire specifications 295/80R22.5, the highest gear ratio of the transmission is 0.8, and the rear axle ratio is 4.1. When the engine speed is between 1300-1400 rpm, the vehicle speed is 75-81 km/h.

11

3

Share

How to fold down the rear seats of the Borgward BX5?

Borgward BX5's trunk supports electric opening and closing with memory function, featuring a neatly designed interior. The rear seats support proportional folding and come with a non-full-size spare tire. More details about the Borgward BX5 are as follows: 1. Introduction: The Borgward BX5 is the brand's first compact SUV, with clean and regular lines that cater to Chinese aesthetic preferences. 2. Exterior: Its body dimensions are 4490mm in length, 1877mm in width, and 1675mm in height, with a wheelbase of 2685mm. The body proportions are well-balanced, presenting a compact and three-dimensional silhouette. The creatively designed curve along the top edge of the windows adds a unique touch.

18

0

Share

Should the Engine Be Turned Off During an Automatic Car Wash?

Do not turn off the engine during an automatic car wash. Here are the precautions for an automatic car wash: 1. Vehicle Settings: When entering the automatic car wash, first set the car to neutral gear, do not use the handbrake or foot brake. Once inside, do not move the steering wheel randomly or perform any operations on the vehicle, as this may affect the car wash process. 2. Close Windows and Doors: Ensure all windows and doors are closed. Drive the left wheel onto the conveyor belt, shift to neutral without turning off the engine, and do not engage the handbrake. Turn off the automatic headlights and windshield wipers. Before entering, fold the side mirrors on both sides to prevent damage from external pressure.

4

5

Share

How to Replace Brake Pads with an Electronic Parking Brake?

Which part of the vehicle is controlled by the pull switch?

What does the Sagitar dual-clutch mean?

Where is the Fuse for the Beidou Star Power Window Located?

How many liters can the Chenglong H5 fuel tank hold?

How to fold down the rear seats of the Borgward BX5?

Should the Engine Be Turned Off During an Automatic Car Wash?

Why Does an Automatic Transmission Shift with a Jerk?

What is the reason for the sudden loss of network connection in Haval F7?

What car has a Z logo?

How long can the battery of the Highlander hybrid last?