How to Replace Brake Pads for Electric Vehicle Disc Brakes?

1 Answers
Michael
07/30/25 7:36am
Check whether the model of the new brake pads matches the old version. Before lifting the vehicle, open the cover of the brake fluid reservoir and loosen the tire bolts diagonally. Remove the tire, loosen the caliper body fastening screws, clean the dust from the screws, remove the old brake pads, and check for any major issues. When installing new brake pads, distinguish between the inner and outer sides. The friction surface of the brake pads should face the brake disc. Before tightening the caliper body, use tools to push the piston back into position.
Was this review help?
6
2
Share
More Forum Discussions

What is the Chinese name for Jeep?

The American automobile brand Jeep is owned by the automaker Daimler-Chrysler. The world's first Jeep was produced in 1941 during World War II to meet the military needs of the U.S. Army. As the originator of Jeep, DaimlerChrysler exclusively owns this registered trademark. In China, the Jeep brand is limited to Beijing Jeep Corporation Ltd. This means that all other off-road vehicles, such as those produced by Mitsubishi, Toyota, or other companies, cannot be called Jeep. Since July 23, 1941, the Jeep brand has symbolized true four-wheel-drive performance, innovative technology, and continuous improvement. Jeep pioneered the four-wheel-drive segment through Willys-Overland and, in 1983, opened the flourishing path for compact sport utility vehicles (SUVs) with its four-door, four-wheel-drive Jeep Cherokee. Moreover, Jeep vehicles still share a bloodline with the first Jeep. Jeep has been registered as an international trademark since 1950 and has become an international synonym for off-road performance. The Jeep brand has established a reputation for ruggedness, versatility, and genuine four-wheel-drive power. It is widely used not only in military applications but also in various fields such as farming, transportation in harsh road conditions, and disaster relief. Main Jeep models include: Grand Cherokee, Wrangler, Compass, Cherokee, Renegade, Commander, and others. Key milestones in Jeep's development are as follows: In 1938, the U.S. military informed all domestic automobile manufacturers that it sought a lightweight reconnaissance military vehicle to replace traditional three-wheeled motorcycles. In 1940, the U.S. government increased pressure on all domestic automobile manufacturers. It invited bids from 135 manufacturers nationwide, with only Bantam winning the contract. In 1941, in response to the U.S. military's request, Jeep produced the first batch of durable and reliable Willys MB vehicles in just 75 days, capable of single-soldier combat and portable transportation, making significant contributions during World War II. In 1986, Jeep was acquired by Chrysler Corporation. In 2013, the all-new Grand Cherokee was launched. While retaining Jeep's traditional rugged elements, it also significantly increased its smoothness to make it more urban-friendly.
10
4
Share

What should I do if the engine warning light is on in my Kia K2?

If the engine warning light is on, you can follow these steps: First, check whether the engine is running normally, whether there is shaking, black smoke, or difficulty starting, etc. If there is, try not to start it again. It is especially important to note that if the red light is on, do not start the engine again. If the engine is running normally and the car can be driven, please go to a service station as soon as possible to find out the cause. The service station only needs to connect a portable diagnostic tool to easily read the fault code, obtain fault information, and carry out targeted repairs. If the engine is running normally, the owner can also try gently plugging in each wiring harness connector, as it may be caused by a loose connection somewhere, or repeatedly turning the key to the ON position to see if it can be eliminated. Generally speaking, the reasons for the engine warning light being on mainly include the following seven: Sensor failure: The sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or the signal is interrupted, the car's ECU cannot accurately obtain engine data, which will cause the engine warning light to come on. Oil quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and lead to the warning light coming on. Poor combustion of the mixture: Poor combustion of the mixture will cause engine carbon deposits or knocking. After being detected by the oxygen sensor and reported to the ECU, the warning light will come on as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the engine mixture. Turbocharging issues: Intake turbocharging pipelines and turbochargers can also cause the engine warning light to come on. The most common of these is turbocharger damage, and the vehicle will also show symptoms such as oil leakage, high oil consumption, reduced power, metal noise, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may cause the engine pipeline to become blocked, and in severe cases, the engine warning light will come on. If the air filter is not clean and not cleaned regularly, it will cause intake problems. Exhaust issues: Exhaust faults can also cause the engine warning light to come on. Rear oxygen sensor, three-way catalytic converter, exhaust camshaft and bearing failure are all causes of exhaust problems, with the three-way catalytic converter being the most common. The use of leaded gasoline, the use of lead or silicon lubricant additives, damage to the three-way catalytic converter, and engine fuel supply system failures can easily cause three-way catalytic converter failure. Anti-theft system failure: If the car's electronic anti-theft system fails, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system will also cause the engine to not work properly, and the engine warning light will come on.
3
4
Share

What kind of Mercedes-Benz car is the Metris?

Metris is the Mercedes-Benz Metris, an outstanding representative of versatile luxury business vehicles, an MPV that meets both business and family needs. Below is mainly about the chassis and appearance of the Metris: Metris chassis: The Mercedes-Benz Metris chassis adopts the AGILITYCONTROL agile handling technology suspension system. While improving ride comfort, it also makes the driving process full of fun. The Metris features electric power steering, with light and easy handling, performing better than the Sprinter because the Metris is much smaller in size, though the steering feel might be sharper. Metris appearance: In terms of appearance, the Mercedes-Benz Metris combines numerous practical functions with a luxurious exterior. Its design is grand, fashionable, and highly dynamic, blending modernity with classic elements. Every humanized detail provides meticulous care for the successful business journey of passengers.
19
2
Share

What is a Gear Shift?

The transmission control lever, commonly referred to as the "gear lever" or "gear shift," is used to change gears based on driving conditions. Below is an introduction to the transmission: 1. Gear Shift: The gear shift can alter the meshing of gears in the transmission, changing the vehicle's speed and driving force accordingly; it is a tool that transforms the speed of moving parts from one level to another. 2. Function: By operating the gear shift to engage or disengage gears in different ratios, the vehicle can accelerate, decelerate, or reverse. Manual transmission vehicles may have different gear configurations depending on the model. 3. Proper Grip: The correct way to hold and operate the gear shift is to lightly place the palm of the right hand on the gear knob, with fingers naturally gripping it downward. The palm can rotate slightly as needed for different gear positions.
19
1
Share

Is the Audi A4 a performance car?

The Audi S4 is a performance car, and this model is a relatively powerful vehicle. The official 0-100 km/h acceleration time for the Audi S4 is 4.7 seconds. Audi S4 powertrain configuration: The Audi S4 is equipped with a 3.0T V6 turbocharged engine. This engine has a maximum power output of 260kW and maximum torque of 500Nm, delivering very abundant power. It also features multiple driving mode switching functions. All models come with a four-wheel drive system, combined with an 8-speed automatic transmission, achieving a 0-100 km/h acceleration time of 4.7 seconds. Interior configuration: The Audi S4's central control area uses an 8.3-inch LCD display, and this model is equipped with an 8.3-inch floating standard LCD screen.
10
5
Share

Is RFT a run-flat tire?

RFT is a run-flat tire. Below are precautions for tire usage: 1. Tire rotation: Rotate tire positions every 10,000 kilometers to evenly distribute tire fatigue, prevent uneven wear, and extend tire lifespan. 2. Tire dynamic balance: Promptly inspect and repair when experiencing body vibration or steering wheel shake during driving. 3. Driving habits: Avoid rapid acceleration, emergency braking, or sharp turns; avoid hitting curbs; avoid parking on curbs; avoid rapid driving on unpaved roads or uneven surfaces.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.