
Steps to replace brake pads for an electronic parking brake: 1. Prepare a jack, tire wrench, new brake pads, and a wrench. Locate the jacking point and use the jack to lift the area needing replacement off the ground; 2. Remove the tire using tire tools; 3. Use a screwdriver to spread the caliper; 4. Remove the caliper screws and take out the worn brake pads; 5. Sand the edges of the new brake pads at an angle with sandpaper to prevent noise during driving; 6. Install the brake pads, ensuring they are properly seated; 7. Tighten the caliper screws with a wrench, making sure they are secure; 8. Reinstall the tire, remove the jack, then return to the car and pump the brake pedal several times to ensure the caliper presses the brake pads firmly.


