How to Replace a Lost Vehicle License in Another City?

2 Answers
OLola
07/28/25 11:03pm
First, open and log in to the Traffic Management 12123 app on your phone's desktop. On the Traffic Management 12123 homepage, click on the 'More' option in the menu bar. On the Business Center interface, click on 'Replace Lost Driver's License' under the Driver's License Services section. Read the instructions for replacing a lost driver's license and click 'Agree' at the bottom. On the 'Replace/Reissue Driver's License' page, confirm the information such as the type of license plate, license plate number, and vehicle status, then click 'Next'. Fill in the required information, select the reason for the application, the method of receiving the new license, etc., and click 'Next'. Submit the required documents, pay the processing fee, and click 'Submit' at the bottom. After successful payment, the entire process of replacing the vehicle license is completed.
Was this review help?
8
5
Share
McAmy
08/12/25 3:30am
I was quite nervous when I lost my vehicle license while traveling out of town. As a new driver, I checked online and found that the replacement process isn’t too complicated. First, it’s recommended to report the loss at the local police station—though not mandatory, it helps prevent misuse. Then, prepare a copy of your ID card and the vehicle’s VIN information, as the license must be reissued at the vehicle management office in the registration location. If you can’t return immediately, a family member can handle it for you, but you’ll need to write and mail back a power of attorney for them to take to the office. The cost is just a few dozen yuan, and it’s done in a few days. If stopped by the police while driving during the replacement period, honestly explain that the license is lost and being reissued—usually no issue, but don’t delay too long. Make it a habit to keep a backup photo of your license on your phone to avoid panic. Safety first—try not to rush and avoid risks.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

Are Motorcycle Windshields Useful?

Motorcycle windshields are useful as they can block some cold wind in winter. Besides reducing the resistance against wind pressure for the rider, a windshield can also help maintain the motorcycle's balance and minimize the impact of wind pressure on safety. Specific functions of motorcycle windshields: They enhance the overall aesthetic of the bike, reduce wind resistance, increase speed, and improve riding stability. Currently, motorcycles equipped with factory-installed windshields are mainly adventure bikes and touring bikes, which are designed for long-distance travel. Considering the significant wind resistance on the road, windshields can effectively reduce rider fatigue, block cold winter winds, and minimize dust and noise intrusion. Materials used for motorcycle windshields: Commonly used materials include PC, PVC, PMMA, and PET. PVC has high toughness but lower transparency, is prone to scratches, and can discolor under high temperatures. Acrylic (PMMA) offers high transparency but is fragile. PC combines the advantages of both, though domestic production may not meet certain standards. Imported PC surfaces have coatings that resist scratches and discoloration for 5-6 years. Disadvantages of motorcycle windshields: Many manufacturers design windshields with a streamlined appearance to function as spoilers. However, during high-speed riding on long trips, the wind pressure from the front can cause imbalance in the motorcycle's movement. Additionally, direct wind pressure on the rider can lead to fatigue over time due to prolonged resistance.
9
2
Share

What is the tire size of the Audi A8?

The Audi A8 has two tire sizes: 255/45R19 and 265/40R20. The first numbers, 255 and 265, represent the tire width in millimeters (255mm and 265mm, respectively). The numbers 45 and 40 indicate the aspect ratio of the tire's cross-section, which is 45% and 40%, meaning the height of the cross-section is 45% and 40% of the width. The numbers 19 and 20 represent the rim diameter in inches. The letters or symbols in the middle have special meanings: "X" denotes high-pressure tires; "R" and "Z" denote radial tires; "-" denotes low-pressure tires. The original tire brands for the Audi A8 mainly include Dunlop, Michelin, and Bridgestone. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack touches the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle, and ensure it is at a right angle to the ground. Remove the hubcap and loosen the nuts counterclockwise. Do not fully loosen the nuts; just loosen them enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts, not the tire, are turning. Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and then remove them completely. Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the size, tires also have the following common markings: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
3
1
Share

Which is Better for Family Cars: Turbocharged or Naturally Aspirated?

Turbocharged and naturally aspirated engines each have their own advantages and disadvantages. The actual driving experience is the most important factor. Naturally aspirated models offer a smoother driving experience, while turbocharged models provide more robust power output. To understand the difference between turbocharged and naturally aspirated engines, one must first grasp the principles of engine operation. An engine generates power by burning fuel, which requires air. Turbocharging compresses air via a turbine to enhance fuel efficiency, whereas natural aspiration relies on air intake to improve efficiency. Difference 1: Naturally aspirated engines deliver smoother power, while turbocharged engines offer stronger acceleration. During actual driving, turbocharged engines exhibit a more pronounced abruptness during acceleration, whereas naturally aspirated engines feel more linear. Difference 2: Turbocharged engines are more fuel-efficient at the same maximum power output. Generally, the power increase from turbocharging is about 40%, meaning a turbocharged engine can achieve the same maximum power with a smaller displacement. Thus, turbocharged engines tend to be more fuel-efficient than naturally aspirated ones. Difference 3: Naturally aspirated engines can use semi-synthetic oil, while turbocharged engines require full-synthetic oil. Naturally aspirated engines can operate with either semi-synthetic or full-synthetic oil, but turbocharged engines must use full-synthetic oil. This is because turbochargers can exceed 10,000 RPM during normal operation, and exhaust gases can heat the turbocharger to over 600 degrees Celsius. Full-synthetic oil, with its superior wear resistance and high-temperature performance, is essential to prevent turbocharger failure.
19
3
Share

What Causes the Engine Fault Light to Illuminate in a New Car?

There are primarily 7 reasons for the engine fault light to illuminate: Sensor malfunction: The sensors referred to here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which triggers the engine fault light. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear, leading to the illumination of the fault light. Poor mixture combustion: Poor mixture combustion can cause engine carbon buildup or detonation. When detected by the oxygen sensor and reported to the ECU, the fault light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all lead to poor mixture combustion in the engine. Turbocharging issues: The intake boost pipeline and turbocharger can also cause the engine fault light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the vehicle's intake, it may cause engine pipeline blockage, and in severe cases, trigger the engine fault light. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust faults can also cause the engine fault light to illuminate. The rear oxygen sensor, catalytic converter, exhaust camshaft, and bearing failures are all causes of exhaust problems, with the catalytic converter being the most common. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or faults in the engine fuel supply system can easily cause catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally and trigger the engine fault light. If the engine fault light illuminates, follow these steps: First, check whether the engine is running normally and if there are issues such as shaking or black smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red light is on. If the engine can be started, turn it off and wait for 5-10 minutes. Without pressing the brake, press the start button once, or turn the key halfway to the 'on' position without depressing the clutch. The vehicle will perform a self-check after powering on. Observe whether the fault light on the dashboard turns off after 5-10 seconds. If the fault light remains on, visit a service center as soon as possible to identify the cause. The service center can use a portable diagnostic tool to read the fault code, obtain fault information, and perform targeted repairs.
18
1
Share

What are the manifestations of poor gasoline quality?

If the quality of gasoline is poor, the most obvious phenomenon is increased carbon deposits in the engine. The increase in carbon deposits may not be visible from the outside. If inferior gasoline is frequently used, a significant amount of black carbon deposits can be observed inside the engine when inspected with an endoscope. Poor gasoline quality can also manifest as difficulty starting or even failure to start; engine shaking at idle after starting; noticeable vibrations in the vehicle body; unpleasant odor from exhaust gases; valve noise; lack of power during acceleration and increased fuel consumption; and gear shifting with jerks. Solutions: Completely drain the remaining fuel in the tank, refill with high-quality gasoline, clean the fuel injectors, clean the combustion chamber, and replace the fuel filter. It is recommended that car owners choose high-quality gasoline and the correct gasoline grade when refueling. Methods to determine gasoline quality: Observe the color: Standard fuel should appear golden yellow or colorless and transparent. Fuel that is cloudy, black, dull, or contains suspended particles may be of inferior quality. Smell the odor: Inferior fuel typically exhibits two extreme types of odor. One is diluted gasoline with a very faint gasoline smell, and the other has a strong, foul, pungent, or sour odor. The exhaust emissions will also have an unusual smell. Qualified fuel has a faint aromatic odor. Test by touch: Qualified gasoline is highly volatile. Dip your fingers in a few drops of gasoline. If the gasoline is qualified, your fingers will feel cool. Slow evaporation or noticeable residue indicates poor fuel quality. Listen for sounds: Generally, vehicles using inferior fuel will produce noticeable abnormal noises during driving, accompanied by shaking. Shake it: Shaking gasoline will produce bubbles. The faster the bubbles disappear, the better the fuel quality.
16
1
Share

How to Unlock a Car Anti-Theft Lock?

Here are the methods to unlock a car anti-theft lock: 1. Using an integrated chip with external voltage: When the integrated chip receives trigger voltage, the door switch outputs a positive voltage to the drive circuit. 2. Using radio signals: After the signal is received, it can command or drive various corresponding mechanical or electronic devices. 3. Pressing the car anti-theft system on the remote control: When the door is illegally opened, the anti-theft alarm system will automatically send an alert message.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.