How to Replace a Driver's License in a Different Location?

2 Answers
VanKira
07/29/25 3:43am
Identity proof of the motor vehicle driver; a written statement for the loss of the motor vehicle driver's license. You need to bring the above-mentioned documents to the vehicle management office and fill out the "Motor Vehicle Driver's License Application Form" and the "Motor Vehicle Driver's License Replacement Application Form". After paying the relevant driver's license replacement fees, you can receive the new version of the driver's license.
Was this review help?
12
2
Share
VonMalia
08/12/25 7:31am
Last time I renewed my driver's license in another city, it was super convenient using the Traffic Management 12123 APP. Just register an account, log in, and select the 'out-of-city license renewal' option as prompted. You'll need to upload photos of both sides of your ID card and your original driver's license, plus a medical examination report—just get a quick check-up at any local hospital or designated center. After filling in your info, the APP automatically reviews it, and your new license gets mailed to you in a few days—no need to queue at the DMV. The fee is just a small processing charge of a few dozen yuan, and the best part is you don’t have to take time off work. It's perfect for frequent travelers like me. You can also use the APP to check for traffic violations—super handy. Just don’t miss the renewal deadline, or you’ll have to retake the written test, which is a hassle.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

How to Deal with the Rattling Noise in the Bora's Center Console?

Bora's center console rattling noise might be caused by deviations in plastic molds or installation shifts, resulting in mutual friction and squeezing sounds due to bumps. Locate the source of the noise, identify the friction point, and place a rubber-like material to block it, which provides good cushioning. Below are some solutions related to center console rattling noises: 1. First, drive slowly and listen carefully to determine the location of the noise, checking if any foreign objects were inadvertently placed, such as small iron wires in the toolbox, debris in the center console gaps, or surrounding clutter. If the noise persists after cleaning, it is likely that some components of the center console have loosened due to frequent use. 2. If the audio system was modified, ensure all screws are tightened, and use silicone to fill any gaps between panels.
14
0
Share

Are the highway speed limits for pickup trucks the same as for light trucks?

Pickup trucks share the same highway speed limits as light trucks. Classified as light trucks, pickup trucks must adhere to the speed limit standards set for trucks. Below is a detailed introduction to pickup trucks: 1. Overview: A pickup truck is a light-duty cargo vehicle featuring an open cargo box behind the cab, with the cargo box side panels integrated into the cab structure. It combines a passenger car front with a cargo-carrying rear, serving dual purposes. 2. Classification: Technically, pickup trucks can be categorized into Japanese models (Toyota series, Nissan series, Isuzu series, Mazda series, etc.) and American models (GM series, Ford series, etc.). Based on product grade, pickup trucks can be divided into high-end, mid-range, and low-end tiers.
5
4
Share

Where is the Crown Crankshaft Position Sensor Located?

Toyota Crown crankshaft position sensor is located near the air conditioning pump. The detection methods for the crankshaft position sensor are as follows: 1. Resistance detection of the crankshaft position sensor: Unplug its wiring connector, and use a multimeter to measure the resistance between each terminal on the sensor. The values should comply with the specifications in the attached table; otherwise, it is damaged and needs replacement. 2. Output signal detection of the crankshaft position sensor: Unplug the wiring connector of the crankshaft position sensor. When the engine is turned, there should be pulse signal output between G1-, G2-, and G- terminals. If there is no pulse signal output, replacement is required. 3. Gap detection between the sensor coil and the signal rotor: Use a feeler gauge to check the air gap between the signal rotor and the sensor coil protrusion. The gap should be 0.2~0.4mm. If the gap does not meet the requirements, replacement is needed.
1
5
Share

What is the difference between monocoque and body-on-frame vehicle structures?

The differences between monocoque and body-on-frame vehicle structures are as follows: 1. The core component of a body-on-frame structure is called the chassis frame. The frame is typically composed of two longitudinal beams and several cross beams that run through the entire body, providing high strength and torsional resistance. (1) Advantages: The frame absorbs some engine vibrations and road shocks, reducing interior noise and protecting the vehicle body. (2) Disadvantages: The frame is heavy and positioned high, raising the vehicle's center of gravity, which decreases stability at high speeds. The substantial weight of the frame increases the vehicle's overall weight, leading to higher fuel consumption. 2. The monocoque body structure features an integrated design without a separate frame. (1) Advantages: Vehicles with monocoque structures are lighter, have a lower center of gravity, offer smoother driving, and better fuel efficiency. (2) Disadvantages: Without a frame, when driving on rough roads with uneven wheel forces, the body is more prone to deformation.
16
3
Share

How often should the transmission fluid be changed in a Honda CR-V?

Honda CR-V transmission fluid replacement intervals vary depending on the transmission type: 1. Automatic transmission fluid should be changed every 40,000 kilometers; 2. Manual transmission fluid should be changed every 60,000 kilometers. The methods for changing Honda CR-V transmission fluid are as follows: 1. Gravity Drain: The process is similar to changing engine oil. Loosen the oil pan bolt and let the transmission fluid drain out by gravity. This is the most common and easiest method, but it doesn't completely remove all the old fluid. Residual fluid tends to remain in recessed areas. 2. Machine Flush: New transmission fluid is added to a flushing machine, which connects to the transmission's fluid lines. The machine pushes new fluid through while flushing out the old fluid, resulting in a cleaner system. The more new fluid used, the cleaner the system becomes. A machine flush typically requires about 10-13 liters of transmission fluid and takes approximately 1 hour. 3. Oil Pan Removal: This method provides the most thorough cleaning by removing the oil pan at the source, allowing for cleaning of the dirty filter. Removing the oil pan is a major task that requires more labor time and costs significantly more.
19
2
Share

Differences Between Monocoque and Body-on-Frame Vehicle Structures

The differences between monocoque and body-on-frame vehicle structures are as follows: 1. Monocoque vehicles lack a rigid frame structure; body-on-frame vehicles feature a rigid frame, also known as a chassis ladder frame. 2. Monocoque structures are lighter in weight, lower in height, easier to assemble, and offer higher stability; body-on-frame structures are relatively bulky, heavier, have a higher center of gravity, and exhibit poorer stability at high speeds. 3. The monocoque body is integrated as a single unit with suspension components directly attached to it; the body-on-frame structure suspends the vehicle body on the frame, connected via elastic components. 4. Monocoque bodies provide smoother road handling, lower vibration frequencies, and reduced noise; body-on-frame structures demonstrate less stable road performance, generate more vibrations, and offer lower safety levels.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.