···
Log in / Register

How to Replace a Damaged License Plate?

5 Answers
TaylorMarie
07/28/25 8:08pm

According to regulations, driving a motor vehicle on the road without displaying a license plate, or intentionally obscuring, defacing, or improperly installing the license plate will result in a 12-point deduction. Therefore, if your license plate is damaged, you must promptly visit the vehicle management office for a replacement. The relevant details are as follows: 1. Collecting the License Plate: Generally, after 8 working days, you can return to the vehicle management office with the payment receipt, vehicle registration certificate, and acceptance voucher (a document provided when collecting the temporary plate) to pick up your new license plate at the issuance window. 2. Mailing: If you prefer to avoid the hassle, you can opt for postal express delivery service. This needs to be arranged on the same day you apply for the license plate replacement. There is a fee for each set of plates, and they are expected to be delivered to the specified location within 3 working days.

Was this review help?
7
5
Share
VonKyle
08/11/25 11:53pm

My license plate was scratched before, so I went to the DMV. Just bring your ID and vehicle registration certificate, and fill out an application form. The process is simple: first, queue up for a number, then the staff will inspect the damage; if the numbers are illegible, you must get a new one, and just pay a small fee of a few dozen yuan. New plates are issued quickly, sometimes you can get a temporary one the same day. Don't drive around carelessly during the plate replacement period to avoid tickets. Usually, be careful when choosing parking spots, avoid parking near pillars, walls, or gravel roads to prevent damage. The key thing about license plates is clarity, as they're used for traffic management identification and surveillance. It's not a difficult issue, but it's better to deal with it early—delaying it may lead to blurred numbers causing trouble!

Was this review help?
17
0
Share
Expand All
MacMila
09/30/25 6:45am

Replacing a damaged license plate is straightforward. Here's the process: First, assess the damage level; minor scratches can be ignored, but unclear numbers must be replaced. Go to the local DMV service hall, present the owner's ID, vehicle registration, and insurance policy, then fill out the application form. Staff will verify on-site, and you'll pay around 30 to 50 yuan. After receiving the new plate, just install it yourself with bolts. The whole process takes about half an hour and isn't troublesome. Remember, using a metal frame cover for rust and theft prevention saves money and effort. Blurred numbers can lead to traffic police fines, so prioritize safety and handle it promptly—that's the smart move.

Was this review help?
4
2
Share
Expand All
OSabrina
11/13/25 8:37am

Damaged license plate needs replacement? My experience is to prioritize checking the readability of the numbers. Minor scratches can be wiped off, but for severe damage, simply visit the DMV. Bring the vehicle owner's certificate and registration to submit an application, and the replacement can be done in as fast as one hour. The cost is affordable, and before major incidents, temporarily displaying the number on a piece of paper can prevent misjudgment. Always be mindful to avoid potholes and hard objects to prevent damage to the license plate and ensure smooth driving—this maintenance tip should not be forgotten.

Was this review help?
17
4
Share
Expand All
Carolyn
01/04/26 3:29am

The cost of replacing a license plate is not high. I checked the local standards, and it costs about 30 to 40 yuan to get it done. First, go to the vehicle management office counter to fill out the forms, and bring all the vehicle documents. It's best to make an appointment to save time. There are fewer people at noon or during the early shift. It takes half a day to a day to receive the new plate. Installation is simple; you can just screw it on yourself. It is recommended to choose an official point with good reputation and avoid small stalls, as they are prone to scams. Replace damaged license plates early to avoid fines. Clear license plate numbers are crucial for traffic safety. As long as you act quickly, the process is worry-free.

Was this review help?
11
3
Share
Expand All
More Forum Discussions

What are the differences between the Touareg and the Touareg X?

The body dimensions of the Touareg and the Touareg X are different: the Touareg measures 5039mm in length, 1989mm in width, and 1773mm in height; the Touareg X measures 4905mm in length, 1989mm in width, and 1719mm in height. Both the Touareg and the Touareg X have a fuel tank capacity of 70 liters. Both models are equipped with a 2.0T turbocharged engine, delivering a maximum power of 137kW and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission. They feature a MacPherson strut front suspension and a multi-link independent rear suspension.
6
4
Share

How to deal with the vehicle stop warning?

Vehicle stop warning can be handled by: pulling over safely, contacting a 4S shop or professional auto repair shop, and using professional computer diagnostic equipment to check the fault codes stored in the vehicle's computer to determine the displayed code, then repairing the vehicle accordingly. The stop warning light is connected to the engine oil pressure, low brake fluid level, coolant temperature gauge, and electronic brake force distribution system fault warning lights. When any of these components has an issue, the stop light will illuminate. For example, if the engine coolant temperature is too high while driving, the coolant temperature warning light will come on, and the stop light will also illuminate to alert the driver of an engine fault.
18
4
Share

What are the body dimensions of the Mazda CX-30?

The body dimensions of the Mazda CX-30 are: length 4395mm, width 1797mm, height 1545mm, with a wheelbase of 2653mm. Taking the 2020 Mazda CX-30 as an example, it belongs to the compact SUV category, with a front track of 1564mm and a rear track of 1563mm. The 2020 Mazda CX-30 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 158ps, a maximum power of 116kw, and a maximum torque of 202nm, paired with a 6-speed manual transmission.
19
0
Share

Why Should the Engine Be Turned Off Before Refueling a Car?

The reasons for turning off the engine before refueling a car are: 1. When the engine is not turned off, the engine and other instruments are in operation. Gasoline is an electrolyte, which can easily cause instrument leakage, leading to short circuits or open circuits in the wiring; 2. The exhaust pipe continuously emits exhaust gases, which may carry sparks, creating potential safety hazards; 3. Operating instruments generate a large amount of heat, accelerating the volatilization of gasoline. The concentration of gasoline-air mixture increases and is difficult to disperse, making it prone to ignition and explosion. The correct steps for refueling a car are: 1. Slow down and drive into the gas station at a reduced speed, and drive out at a low speed after refueling; 2. Turn off the engine before refueling; 3. After filling up, close the fuel nozzle before starting the car.
15
1
Share

How Long After Car Paint Touch-Up Can It Be Exposed to Rain?

How long after car paint touch-up it can be exposed to rain depends on different situations: 1. If the painting is done in a paint booth, the car can be exposed to rain immediately after driving out; 2. If the painting is done at a professional shop, the car can be exposed to rain when the staff delivers the car; 3. If the painting is done on the same day, it needs two days before being exposed to rain; 4. At lower temperatures, it requires one week before being exposed to rain. The method for paint touch-up is: 1. Clean the area where the paint has chipped off with water; 2. Sand the chipped area with sandpaper and check by hand if the surface is smooth; 3. Cover the areas that do not need touch-up with tape; 4. Use a spray can matching the car's color to spray the chipped area.
19
4
Share

How to Eliminate the Illuminated ABS Warning Light in a Car?

ABS refers to the vehicle's Anti-lock Braking System. The illumination of the ABS warning light may indicate a malfunction in the wheel speed sensor, which can be categorized into two scenarios. The first scenario involves sensor failure causing incorrect transmission of wheel speed data, leading to discrepancies in the information received by the onboard computer, thereby triggering the ABS light. In such cases, professional repair or sensor replacement at a service center is required. The second scenario occurs when the wheel speed sensor becomes dirty, preventing accurate detection of the wheel's actual speed, which also results in the dashboard warning light. Cleaning the sensor can restore normal functionality. Additionally, a fault in the sensor wiring that disrupts data transmission to the computer system can prevent the system from recognizing the status of each wheel, causing the dashboard light to illuminate. In this situation, replacing the sensor wiring harness is the only solution. The primary function of ABS is to automatically regulate the braking force during vehicle deceleration, preventing wheel lock-up and maintaining a state of rolling and sliding. This ensures maximum traction between the wheels and the road surface. ABS enhances lateral stability during braking, improves directional control, optimizes braking efficiency, and reduces localized excessive tire wear.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.