How to Repair Small Dents on the Car Body?

Why Can't the Trunk of Emgrand GS Open?

The reasons why the trunk of Emgrand GS cannot open: 1. The key is out of battery; 2. The trunk door is blocked or stuck; 3. There is a circuit malfunction. It is better to go to a 4S shop for inspection. The body dimensions of Emgrand GS are 4440mm in length, 1833mm in width, and 1560mm in height, with a wheelbase of 2700mm. The interior of this car adopts a red and black contrasting color design across the entire series, and the sporty changes in the seat style are also very noticeable. Additionally, piano lacquer elements are added to the dashboard in front of the co-pilot for decoration, creating a striking visual effect. In terms of power, Emgrand GS offers two options: 1.4T and 1.5T, with maximum power outputs of 141kw and 177kw respectively, and peak torques of 235nm and 255nm respectively.

17

3

Share

What Are the Reasons for High Fuel Consumption in Trucks?

The reasons for high fuel consumption in trucks are as follows: 1. Insufficient air supply from the turbocharger system: Turbocharger internal leakage, loose intercooler pipe clamps, exhaust manifold gasket and intercooler leaks. The engine runs normally at idle but emits black smoke during rapid acceleration. At high RPMs, the typical turbocharger whistling sound is absent. Pressure gauge measurements show below 2 bars, requiring turbocharger replacement. 2. Abnormal fuel supply system: Worn plungers inside the fuel pump cause insufficient working pressure. Internal wear of injectors or partial clogging of injection holes leads to poor atomization. Black smoke and eye irritation occur during both idle and rapid acceleration. Engine temperature runs high during operation. 3. Abnormal valve train system: Due to thermal expansion, engine components expand as temperature rises during operation. If clearances are too small, thermal expansion of valves and their components (valve lifters, camshaft, etc.) in hot conditions causes improper valve sealing, resulting in engine leakage and power loss.

19

0

Share

Can a Zhejiang A license plate be transferred to one's son?

Hangzhou license plates cannot be transferred to children. Below is relevant knowledge about license plates: Points to note regarding license plate transfer: License plate numbers cannot be transferred through a transfer process. The original license plate can only be reassigned to the owner's new vehicle information and cannot be transferred to another person. This means that even if the license plate number is reassigned to another vehicle, it will remain the property of the original owner for six months, after which the license plate will enter the license plate resource pool. When a motor vehicle undergoes a transfer registration or cancellation registration, the license plate number must be changed. Only small vans used for goods transportation can retain their original license plate numbers. Function of license plates: License plates serve as a numbering and information registration system for vehicles. Their primary function is to identify the region to which a vehicle belongs and to trace the vehicle's owner and registration information based on the license plate.

7

0

Share

Is the lighting test in Subject 3 random or fixed?

Subject 3 lighting test is randomly combined. For the simulated lighting test, it is clear that corresponding lighting operations must be performed according to the voice prompts. If one light is not operated correctly or the wrong operation is made, the test will be failed. Moreover, several questions are randomly selected, but the simulated lighting test mainly consists of a few operations, including low beam, high beam, alternating high and low beams, and turning on the hazard warning flashers. The specific content of the Subject 3 simulated lighting test is as follows: The content of the simulated lighting test mainly targets some complex road conditions or nighttime driving scenarios. The nighttime driving lighting simulation test will randomly select three items from the project for examination. Candidates only need to use the corresponding lights based on the principle of not interfering with others and ensuring safety. Notes: During the test, there will be voice prompts for light usage, and the operation must be completed within 5 seconds after the voice prompt ends. Do not be slow, but also do not act before the prompt is finished.

4

0

Share

What are the differences between the BYD Han DM Luxury Edition and the Premium Edition?

The differences between the BYD Han DM Luxury Edition and the Premium Edition lie in the fact that the Premium Edition is slightly more expensive and offers upgrades in several aspects such as seats, multimedia, speakers, rearview mirrors, and rear air conditioning. Below is an introduction to the BYD Han DM: 1. Exterior: The "Han" series marks BYD's first attempt at designing two distinct front-end styles for a single model. The Han DM and Han EV differ significantly in appearance. The Han DM features a large grille with a sharp hexagonal design, complemented by an array of concave-style bars that fill the "Dragon Mouth," enhancing both texture and the performance appeal of this flagship model. 2. Dimensions and Power: The BYD Han DM is positioned as a mid-to-large-sized sedan, measuring 4980*1910*1495 mm with a wheelbase of 2920 mm. It is equipped with a 2.0T plug-in hybrid system, with the electric motor delivering a maximum power of 180 kW.

13

5

Share

What is the working principle of the clutch slave cylinder?

The working principle of the clutch slave cylinder is that the driving part and the driven part of the clutch gradually engage through the friction between the contact surfaces, or by using liquid as the transmission medium (hydraulic coupling), or by using magnetic transmission (electromagnetic clutch). Additional information: Friction clutch: Currently, the most widely used in automobiles is the spring-loaded friction clutch (simply referred to as the friction clutch). The torque generated by the engine is transmitted to the driven disc through the friction between the flywheel, pressure plate, and the contact surface of the driven disc. When the driver depresses the clutch pedal, the large end of the diaphragm spring drives the pressure plate to move backward through the transmission components. Clutch master cylinder: The clutch master cylinder refers to the part connected to the clutch pedal and linked to the clutch booster through hydraulic lines. Its function is to collect the pedal travel information and, through the action of the booster, enable the clutch to disengage.

2

5

Share

How to Repair Small Dents on the Car Body?

Why Can't the Trunk of Emgrand GS Open?

What Are the Reasons for High Fuel Consumption in Trucks?

Can a Zhejiang A license plate be transferred to one's son?

Is the lighting test in Subject 3 random or fixed?

What are the differences between the BYD Han DM Luxury Edition and the Premium Edition?

What is the working principle of the clutch slave cylinder?

How many seats does the Range Rover have?

Can I check my score if I didn't sign after Subject 3 exam?

At what angle does parking a car on a slope damage the vehicle?

Why does the engine sound loud when the car's air conditioning is on?