How to Repair Scratches on the Windshield?

1 Answers
AmyLee
07/30/25 4:24am
Here are the methods to deal with scratches on the car: 1. Hairline scratches: For hairline scratches, polishing or applying a rubbing compound is usually sufficient to remove them. Simply wiping gently can make the scratches disappear. 2. Light scratches: For light scratches, just prepare a tube of toothpaste. Toothpaste is very effective for shallow scratches that haven't damaged the car's primer. Especially for marks left by another vehicle's paint during a scrape or adhesive residue from stickers, most can be completely wiped off. 3. Moderate to deep scratches: Moderate and deep scratches cannot be repaired by polishing. For small dents not exceeding 5mm, they can be leveled with filler putty before repainting.
Was this review help?
20
4
Share
More Forum Discussions

How to Reset the Maintenance Light on Changan Uni-T?

Changan Uni-T's maintenance light reset button is located on the steering wheel, and manual reset can be achieved through specific operations. Manual Reset Method: Press and hold the reset button "A", while stepping on the brake pedal, then turn the ignition switch to "on" without starting the car. When the characters "INSP" flash or the display screen blinks, continue holding the reset button "A" until "..." appears on the display. Release the reset button "A" and the brake pedal. Finally, turn the ignition switch back to the "Off" position. The reset process is now complete. Function of the Maintenance Light: It records the mileage of some important components, serving as a reminder for car owners and maintenance personnel.
2
1
Share

Should You Turn Left or Right First When Parallel Parking?

Maintain a distance of approximately 30 centimeters between the right side of the car body and the edge of the parking space. Drive straight to the starting line, then begin reversing while observing the right rear-view mirror. When the front line of the parking space disappears from the rear-view mirror, turn the steering wheel fully to the right and continue reversing. Upon seeing the inner corner of the parking space, turn the steering wheel one full rotation to the left and continue reversing. When the left rear tire is about to touch the dashed line of the parking space edge in the left rear-view mirror, turn the steering wheel one more full rotation to the left while simultaneously observing both left and right rear-view mirrors.
5
2
Share

What are the soft passing methods for Subject 2 driving test?

Maintaining a calm mindset during the test is the most reliable guarantee for passing. First and foremost, be confident, as confidence allows your driving skills to be demonstrated normally. Mastering the technical essentials proficiently is the fundamental requirement for passing the test. Understanding the test requirements clearly is the prerequisite for passing the test. Don't practice driving just for the sake of practicing.
16
5
Share

How is the vehicle body crossing the line determined in Subject 2 test?

Before the vehicle enters the right-angle turn, it should drive close to the right side, maintaining a distance of about 0.1 meters between the right wheels and the right edge of the road. When entering the "S" curve, the vehicle should enter the curve from the right side of the road and maintain a uniform low speed. During parallel parking, maintaining an upright sitting posture is crucial for accurately judging various reference points. Turn on the right turn signal, steer the wheel appropriately to the right, and drive slowly along the right side of the road, paying attention to the distance between the vehicle body and the right edge line.
17
2
Share

What is the method to reset the maintenance light on Landwind X7?

Hold the button on the end of the wiper stalk, and the SET message will appear on the instrument panel. Release the button and press it again. Wait until the number 5000 km appears on the screen, then release the button and turn off the vehicle. Restart the vehicle to complete the maintenance light reset for the Landwind X7.
7
4
Share

How to Treat VOC Waste Gas?

Catalytic combustion is more suitable for the purification of high-concentration, small-airflow waste gas, but the promotion and use of this method are somewhat limited. This method utilizes the physical and chemical properties of pollutants, using water or chemical absorption liquids to absorb and remove waste gas. This method involves passing the pollutants through an adsorption tower filled with adsorbent, leveraging the strong adsorption capacity of the adsorbent for the pollutants. Currently, photocatalytic technology is difficult to apply on a large industrial scale and is mostly limited to experimental research and small-airflow applications.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.