How to Repair Scratches on the Car Windshield?

How to unlock the anti-theft lock on a Haval H6?

It is recommended that the owner have a professional from the 4S shop unlock the anti-theft lock on the Haval H6 and not attempt to unlock it themselves. The Haval H6 is positioned as an urban intelligent SUV, with dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, and a wheelbase of 2680mm. The Haval H6 is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine has a maximum power of 110 kilowatts and a maximum torque of 210 Newton-meters, with a maximum power speed of 5600 revolutions per minute and a maximum torque speed ranging from 1800 to 4400 revolutions per minute. The 2.0-liter turbocharged engine has a maximum power of 145 kilowatts and a maximum torque of 345 Newton-meters, with a maximum power speed of 5500 revolutions per minute and a maximum torque speed ranging from 2000 to 3200 revolutions per minute.

20

0

Share

What are the operating steps for a wheel alignment instrument?

Below are the operating procedures for a wheel alignment instrument: 1. Check whether there are gaps or damages in the vehicle's suspension device, wheel bearings, steering system, etc. The maximum allowable tread depth difference for tires on the same axle is 2mm. The tire inflation pressure should comply with regulations. The vehicle should be equipped with full weight. 2. Drive the vehicle onto the four-post lift and stabilize it, ensuring the vehicle's center aligns with the lift and turntable center. Check and, if necessary, modify the vehicle specifications. 3. Operate strictly according to the steps displayed by the alignment instrument, with no omissions allowed. For example, perform wheel deviation compensation and tire inspection as required. 4. The adjustment of each wheel's alignment parameters (toe-in, camber angle) should comply with the requirements of the respective vehicle model's "service manual." Any parameters that do not meet the specified requirements should be adjusted (except for those that cannot be adjusted on the original vehicle).

1

0

Share

What are the differences between the 2020 and 2021 Breeze models?

The main differences between the 2021 Breeze and the 2020 model are adjustments to the configurations of some variants, along with the addition of a new 240TURBO-CVT Zhixiang Edition variant. Below are the specific details of the new variant: 1. The newly added 240TURBO-CVT Zhixiang Edition comes equipped with leather seats, a leather steering wheel, a leather gear shift handle, and more. The driver's seat features 8-way power adjustment with 4-way lumbar support, while the front passenger seat offers 4-way power adjustment. Additionally, it includes the Honda SENSING (Safety Sense) intelligent driving assistance system. 2. In terms of powertrain, the new Breeze continues to use the original 1.5T gasoline and 2.0L hybrid systems. The 1.5T version delivers a maximum output of 142kW (193 horsepower) and 243N·m of torque, while the 2.0L hybrid version has a maximum combined output of 158kW (215 horsepower), with the engine producing a maximum torque of 175N·m and the electric motor generating a maximum torque of 315N·m.

18

5

Share

What is the normal temperature range for antifreeze?

Antifreeze's key indicators are its freezing point and boiling point. In the market, antifreeze is available with freezing points of -15°C, -25°C, -30°C, -40°C, etc. Generally, it's advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region. Antifreeze replacement method: Before completely replacing the antifreeze, conduct a thorough inspection to check for any leaks or cracks in the pipes, with a focus on the five-way hose. The five-way hose is named for its five connection points to various parts. Antifreeze flows through the five-way hose and is distributed to different parts of the car to function. If there are signs of antifreeze leakage in this part, replace the hose or resecure the connection as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir, then continue filling the reservoir with water to allow it to circulate continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially draining from the reservoir will have a faint pink tint. Keep adding clean water until the drained water runs clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new antifreeze through the radiator hose, which allows the antifreeze to flow quickly into the radiator. Then add another bottle of antifreeze to the reservoir until it's nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the system. Top up the antifreeze to the "MAX" mark on the reservoir.

5

1

Share

How Many Cylinders Does the BMW 3 Series 320 Engine Have?

The BMW 3 Series 320 is equipped with a four-cylinder engine, manufactured in a German factory, making it an imported engine. The engine model of the BMW 3 Series 320 is B48B20C, with a maximum power output of 115 kW, a maximum torque of 250 Nm, and a maximum horsepower of 156. Here are some maintenance tips for the BMW 3 Series 320 engine: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, ensuring the standard meets or exceeds the manufacturer's requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will degrade over time. After a certain mileage, the oil's performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil periodically based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass the filter and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, but larger quantities can precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures proper engine operation but also extends the lifespan of both the radiator and the engine.

11

3

Share

What to Do When a Car Shows Excessive Exhaust Emissions on the Road?

If a car shows excessive exhaust emissions on the road, a routine inspection of the exhaust is necessary. The on-road exhaust emission test is a type of remote sensing monitoring. Remote sensing monitoring has low accuracy and is not used as legal evidence; it is merely for screening purposes. There are four methods for monitoring vehicle exhaust emissions: single idle speed method, double idle speed method, steady-state operating mode method, and simple transient operating mode method. The single idle speed method has been phased out due to its simplicity and higher detection data limits. The simple transient operating mode method is more scientific than the double idle speed method and steady-state operating mode method, providing more accurate detection data. The simple transient method is a load-bearing test method, and its results can effectively reflect the actual emission conditions of the vehicle on the road. It is a scientific, advanced, and practical detection method. Compared to the double idle speed method, it has a lower misjudgment rate, effectively prevents tampering, and can also detect nitrogen oxide emissions, providing more scientific and objective data for vehicle supervision. Here are the methods to address excessive vehicle exhaust emissions: Clean or Replace the Three-Way Catalytic Converter: The three-way catalytic converter is a significant factor in excessive vehicle exhaust emissions. In many cases, excessive emissions are caused by issues with the three-way catalytic converter. Its function is to oxidize CH and CO into carbon dioxide and H2O. If the three-way catalytic converter malfunctions, passing the exhaust emission test becomes difficult. Common issues include carbon buildup, clogging, poisoning, or failure. Cleaning the three-way catalytic converter can resolve some issues, but if it is poisoned or damaged, timely replacement is necessary. Clean or Replace the Spark Plugs: Faulty spark plugs can also lead to excessive exhaust emissions. The most common issue with spark plugs is carbon buildup, which can be cleaned using sandpaper or a cleaning agent. If the spark plugs fail due to erosion or reaching the end of their lifespan, they should be replaced immediately to avoid affecting normal vehicle operation. Check the Oxygen Sensor: When the oxygen sensor is covered in carbon buildup or malfunctions, it affects the ECU's ability to correctly adjust the air-fuel mixture and may also impact the normal operation of the three-way catalytic converter. It is recommended to clean the oxygen sensor and the three-way catalytic converter together. Perform a Deep Engine Cleaning: After detecting excessive exhaust emissions, a thorough engine cleaning—including the throttle body, fuel lines, intake manifold, and fuel injectors—can restore the engine to normal working condition.

6

4

Share

How to Repair Scratches on the Car Windshield?

How to unlock the anti-theft lock on a Haval H6?

What are the operating steps for a wheel alignment instrument?

What are the differences between the 2020 and 2021 Breeze models?

What is the normal temperature range for antifreeze?

How Many Cylinders Does the BMW 3 Series 320 Engine Have?

What to Do When a Car Shows Excessive Exhaust Emissions on the Road?

What are the reasons for the engine fault light in Shandeka trucks?

Where is the engine imprint number located on the Haval H6?

What Causes the Sizzling Sound When Starting a Car?

Differences Between Manual and Automatic Transmissions?