···
Log in / Register

How to Repair Scratches on Glass?

6Answers
AdalynnFitz
09/03/2025, 12:22:10 AM

Clean the scratched area with water, then use a paper towel to dry it. Pour floor polish onto your hand and apply it to the scratch. Rub back and forth with your hand. Repeat this process several times, then wipe it clean.

Was this review help?
115
Share
LaDerek
09/15/2025, 01:57:41 AM

Scratches on the glass need to be addressed promptly, as they can impair driving visibility or allow rainwater to seep in. I think the most convenient DIY solution is to use toothpaste or a specialized glass repair compound. First, clean the glass to ensure there's no grease, then gently rub the scratched area in circular motions with a soft cloth dipped in toothpaste. After a few minutes, wipe it clean and check if the scratch has faded. This method works well for light scratches, such as those caused by minor contact with tree branches. If it doesn’t work, the scratch might be deeper, and you may need to consider a car glass repair kit, which can be bought online for just a few dozen yuan—these kits typically include abrasive compounds and polishing cloths, and you’ll need to follow the instructions step by step. After the repair, keep the glass clean and avoid using rough cloths for wiping. Regularly inspect the glass to prevent new scratches. In short, don’t delay—small issues can be resolved with DIY methods, saving time and money while also improving your car’s appearance and safety.

Was this review help?
17
Share
Expand All
JadeFitz
10/29/2025, 02:37:03 AM

I've been driving for over twenty years and have encountered windshield scratches several times. Last time, a small stone hit the windshield, leaving a shallow mark, and I was worried it might crack and affect safety. First, check the scratch depth with your finger: if your nail catches in it, it's deep and you should immediately seek professional repair to prevent expansion; if it's shallow, you can handle it yourself. I tried cleaning it with an old toothbrush and kitchen detergent, but the results were mediocre. Later, I bought a repair compound, mixed it in the right proportion, applied it, and polished it in circular motions with a cloth for fifteen minutes until it became clear. After the repair, it's advisable to test for light reflection while driving to ensure there's no glare, especially important for nighttime driving. For prevention, avoid parking under trees and don't let children play with toys near the car, as they can easily scratch the glass. Don't skimp on windshield repairs—safety comes first.

Was this review help?
15
Share
Expand All
VonEloise
12/12/2025, 01:48:56 AM

Glass scratches are categorized into three levels: light, moderate, and deep. Light scratches are as fine as a hair strand and can be DIY repaired: purchase automotive glass polish or rubbing compound, clean the glass, apply it to the scratched area, and polish in circular motions for five minutes using a cotton cloth or microfiber towel, then wipe clean with a dry cloth. Moderate scratches may require professional tools like an electric polisher; deep scratches or cracks necessitate glass replacement to prevent accident risks. Check the glass's light transmittance before and after repair to ensure driving visibility is unaffected. For daily maintenance, use specialized glass cleaners and avoid contact with hard objects. Regular upkeep after quick repairs extends lifespan.

Was this review help?
2
Share
Expand All
GideonRose
02/01/2026, 02:58:00 AM

As a mother of two, I'm most concerned about safety when it comes to windshield scratches. Scratches can cause glare that distracts children in the car, potentially leading to accidents. For minor scratches, I recommend starting with safe methods: first check if the scratch is in the driver's line of sight - if yes, repair it immediately. Purchase eco-friendly repair kits with non-toxic ingredients, clean the area and gently polish for ten minutes. If results aren't visible, don't attempt DIY fixes - take it to a professional for polishing, which is cost-effective and reliable. Teach children not to scratch glass and always lock car doors when parked. Properly repaired windshields make driving much safer.

Was this review help?
16
Share
Expand All
LaDaisy
04/27/2026, 01:09:06 PM

I prefer frugal car repairs and try cost-saving methods for glass scratches first. Mix white vinegar and baking soda into a paste, apply it to the scratch, let it sit for ten minutes, then wipe it off—suitable for minor marks. If that doesn't work, invest in a dedicated repair paste, which is cost-effective in the long run. After repair, pay attention to the glass's water resistance to prevent rainwater from seeping in and causing rust. Regularly inspect scratches to prevent them from expanding, saving the expense of replacing the entire glass. From an environmental perspective, choose biodegradable products to reduce chemical pollution.

Was this review help?
19
Share
Expand All
More Q&A

What are the methods for starting on a slope in Subject 2?

Subject 2 slope starting methods are as follows: 1. Handbrake method: After stopping on the slope, keep the foot brake pressed, depress the clutch, and pull the handbrake tight. Ensure the handbrake can hold the car on the slope before releasing the foot brake. Press the accelerator to make the engine roar loudly, maintain the throttle, and slowly release the clutch. The engine sound will gradually weaken as the clutch is released. When the engine sound just quiets down, keep both feet still, release the handbrake, and complete the slope start. 2. Half-clutch method: When practicing this method, after stopping on the slope, lift the clutch until the car body shakes, then release the brake without pressing the accelerator. Rely solely on the clutch to keep the car hovering on the slope, and use fine adjustments to move the car forward or backward. The key to this practice is gentle and delicate footwork. 3. One-foot dual-use method: This method requires the right foot to operate both the accelerator and brake simultaneously. Generally, press the brake with the heel and the accelerator with the toe. While revving the engine, slowly release the clutch with the left foot. When you feel the car tends to move forward, lift the heel off the brake, continue to accelerate and release the clutch, completing the slope start.
105
Share

What is the tire model size of the Haval H6?

The Haval H6 model has two tire specifications: 235/60R18 tires and 235/55R19 tires. All Haval H6 models come with 225/65R17 tires. The numbers in the tire model indicate the load index of a single tire. The higher the index, the greater the load capacity the tire can withstand. More detailed information is as follows: 1. 235/60R18 tires: The tire width is 235mm, the aspect ratio is 60%, meaning the section height is 60% of the width, and the rim diameter is 18 inches. 2. 235/55R19 tires: The tire width is 235mm, the aspect ratio is 55%, meaning the section height is 55% of the width, and the rim diameter is 19 inches. 3. If the vehicle is severely overloaded or fitted with tires with a load index that is too low, the risk of a tire blowout increases significantly. The last letter in the tire model represents the speed rating of the tire. If the vehicle speed exceeds the speed rating of the chosen tire, the tire will be on the verge of a blowout.
119
Share

Is the Lingdong brake electronic?

The Lingdong brake is not an electronic brake. The service brake is the foot brake, which is commonly used during driving (foot brake) to slow down or stop the vehicle while moving forward; the parking brake is the brake used when the vehicle is stationary, also known as the handbrake. Its main function is to prevent the vehicle from sliding forward or rolling backward. The following points should be noted when using the parking brake: 1. When applying the parking brake, press the Jiuhuerun brake pedal downward and pull the parking brake lever upward fully. To release the parking brake, press the Jiuhuerun brake pedal downward, pull the parking brake lever upward slightly, press the button on the handle end with your thumb, and then lower the parking brake lever to its original position; 2. When parking on an inclined surface, if you shift to P position first and then apply the parking brake, the weight of the vehicle will make it difficult to shift out of P position when preparing to start the car; 3. When preparing to start the car, shift the gear lever out of P position before releasing the parking brake; 4. Do not engage the parking brake while the car is moving, as this may cause overheating, reduce the braking effect of the rear wheels, shorten the lifespan of the brake, or cause permanent damage to the brake.
118
Share

Is it mandatory to go to the designated 4S store for car maintenance?

During the new car warranty period, it is necessary to go to a 4S store for maintenance. After the warranty period expires, it is not necessarily required to go to a 4S store for maintenance. Below is relevant information about car maintenance: 1. Maintenance process: First, avoid driving too aggressively; slow down and fasten your seatbelt to ensure personal safety. Ladies should avoid driving in high heels. Regularly change the engine oil, filters, etc., for your car. Spending a small amount periodically can save you big money and provide greater safety while driving. Keep a tire pressure gauge handy and check the tires regularly to prevent aging. 2. Maintenance parts: (1) Basic maintenance: Engine oil and oil filter are part of basic maintenance. (2) Full vehicle inspection: Comprehensive maintenance of the entire vehicle. (3) Deep maintenance: Thorough cleaning and care of major vehicle systems. Without disrupting the original factory specifications, conduct comprehensive care for all components. After all, a car is three parts repair and seven parts maintenance. Proper maintenance not only significantly reduces the failure rate but also further extends the overall lifespan of the vehicle.
116
Share

How to turn on the cooling in BYD S6?

To turn on the cooling in BYD S6: Press the A/C button, then turn on the fan switch, and rotate the temperature control knob to the blue side to release cold air. Adjust the fan speed and set the temperature as needed. Here is more information about car air conditioning: 1. Car air conditioning is a device in the car that can cool, heat, ventilate, and purify the air inside the cabin. Since a car is a relatively enclosed space, prolonged lack of air circulation can cause fatigue, which can be a problem for the driver, affecting driving performance and even posing safety hazards. Therefore, air conditioning has become one of the indicators to measure whether a car is fully equipped. 2. The air conditioning system generally consists of five subsystems: 1. Refrigeration system: Cools or dehumidifies the air inside the cabin or fresh air entering from outside, making the cabin air cool and comfortable. 2. Heating system: Mainly used for heating, it warms the air inside the cabin or fresh air entering from outside, achieving heating and dehumidification. 3. Ventilation system: Draws fresh air from outside into the cabin, providing ventilation and air exchange. It also helps prevent fogging on the windshield. 4. Air purification system: Removes dust, odors, smoke, and toxic gases from the cabin air, keeping it clean. 5. Control system: Regulates the temperature and pressure of the refrigeration and heating systems, while also controlling the temperature, airflow, and direction of the cabin air, ensuring the normal operation of the air conditioning system.
109
Share

Can You Drive on the Highway Without Installing ETC?

You can drive on the highway without installing ETC because it is not mandatory. Starting from January 1, 2020, vehicles without ETC will no longer enjoy various toll reduction benefits and can only pass through manual lanes to pay tolls at toll stations. It may be inconvenient during holidays. ETC is just a different toll collection method and does not affect whether you can drive on the highway. There are two toll collection methods on highways: manual toll collection and ETC toll collection. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, you need to provide the original and photocopies of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, the agent must also provide their valid ID card. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection stamp. Additionally, you need a bank card for deducting highway tolls, be between 18 and 60 years old, and own the vehicle in your name. How ETC works: Through an onboard electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station. Using computer networking technology, it settles the transaction with the bank in the background, allowing the vehicle to pass through highway or bridge toll stations without stopping to pay the toll. Benefits of installing ETC: Time-saving: Avoid the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions; Cost-saving: Reduce costs by minimizing vehicle start-up and braking frequency, decreasing wear and fuel consumption. Users can also enjoy toll discounts; Improved efficiency: ETC lanes can theoretically increase passing efficiency by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.