How to Repair Scratches on Glass?

2 Answers
VanCooper
07/28/25 8:40pm
For small and shallow scratches, they can be removed by polishing. Large scratches may affect visibility, so for safety reasons, it is recommended that car owners opt for direct replacement. Slowly apply the gel along the glass crack, ensuring patience; otherwise, the surface may appear uneven, which is especially noticeable under sunlight. If the glass scratch is deep, it is advisable for car owners to choose a reliable and reputable professional repair shop for restoration. Apply a small amount of toothpaste to the scratched area, wipe with a soft cloth, and then rinse with water. Toothpaste application can help repair minor scratches and also prevent rust.
Was this review help?
4
1
Share
StNicole
08/12/25 1:23am
Last time I cleaned my car windows, I noticed a few fine scratches and felt really upset. I later consulted an experienced mechanic, who said that superficial hairline scratches can be easily fixed by yourself. Just buy a glass repair kit for around ten bucks—it comes with polishing compound and a waxing sponge. The process is simple: first, clean the glass thoroughly, then apply some polishing paste to the sponge and rub in circular motions for about five minutes. Remember to use gentle, even strokes, like applying a screen protector to a phone. Once the scratches are no longer visible, rinse with water and apply a layer of protective wax. I tried it once, and the results were good. But if you can still feel unevenness when touching the surface, it means the damage is deeper—don’t force it. For deep scratches on the windshield, always seek professional help, as they can compromise safety.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

Is a Small Paint Chip from Door Impact Serious?

When noticing paint chips from door impacts, first inspect the damage to determine its extent and any rust formation. For minor fresh scratches, the primer provides rust protection, but if bare metal is exposed, prompt treatment (such as using a touch-up pen) is necessary to isolate the metal from air contact, preventing oxidation, rusting, and accelerated aging of the vehicle body. For larger damages, professional repainting is required. For minor paint chips on car doors, the following repair methods can be used: 1. Touch-up Pen: Purchase a touch-up pen matching or closely resembling your car's color for DIY repairs. 2. Electrical Tape: Apply a similarly colored wax crayon to the scratch, then cover it with electrical tape. 3. Nail Polish: Use a matching nail polish to cover the scratch for a quick fix. 4. Spray Paint: Visit a repair shop for professional spray painting to restore the area.
14
2
Share

Is the paint job outside the same as at a 4S shop?

There are differences between paint jobs at 4S shops and outside shops. The main differences are as follows: 1. 4S shops have color-matching formulas: The color matching at 4S shops may be closer to the original factory color, but whether at a 4S shop or an outside shop, it is impossible to achieve a perfect match with the factory paint due to the higher production processes involved in the car's original color matching. 2. The skill of the painter: Painting is a job greatly influenced by human skill. The quality of the paint job depends on the individual painter, whether at a 4S shop or an outside shop. In this regard, a well-reputed outside shop may not be inferior to a 4S shop. 3. Price difference: The price at 4S shops is significantly higher than at outside shops.
4
3
Share

Is Driving Barefoot Against Traffic Rules?

No, but it is not encouraged as it is uncivilized and unsafe. Here is the relevant information: 1. No explicit requirement: The law does not explicitly prohibit driving barefoot, so theoretically, "driving barefoot" is not illegal. However, from the perspective of civility and safety, it is not encouraged. 2. Motor vehicle drivers must comply with the following regulations: (1) When driving a vehicle, you must carry your driver's license and vehicle registration certificate. (2) Do not lend, alter, or forge your driver's license. (3) Do not hand over the vehicle to someone without a driver's license.
2
4
Share

Why is gear shifting not smooth?

Gear shifting may not be smooth due to reasons such as the need to replace the transmission oil. Here are the relevant explanations: 1. Specific reasons: wear of the gear shift rod, poor performance of the release fork shaft, insufficient clutch travel leading to incomplete separation, excessive viscosity of transmission oil, excessive wear of the synchronizer, etc. Excessive clearance or reduced lubrication in the connection between the gear lever and the transmission can lead to inaccurate gear selection, resulting in difficult gear shifting, which is a common issue. 2. Solution: Adjust the gear shifting position at a specialized repair shop and replace the transmission oil to eliminate the fault. For manual transmissions, shifting at low speeds requires the clutch to fully disengage to smoothly engage the corresponding gear.
11
4
Share

What Are the Car Maintenance Items?

Car maintenance items include: changing engine oil and oil filter; transmission fluid; tire maintenance, etc. Here is additional information: 1. Major maintenance: Major maintenance is based on regular maintenance. In addition to changing the engine oil and oil filter, it also requires replacing the air filter and fuel filter. Major maintenance and regular maintenance can be alternated, with the interval varying by car brand, and the specific time should follow the car manufacturer's recommendations. 2. Engine oil: Engine oil is the lubricant for the engine. To ensure the car's performance, the engine oil should be changed periodically, and its replacement cycle depends on the oil's effective lifespan. 3. Engine: During operation, the engine inhales a large amount of air, and the dust in it can accelerate the wear of the piston group and cylinder. The role of the air filter is to remove dust and particles from the air, ensuring that sufficient and clean air enters the cylinder.
6
1
Share

Which country does HSR exhaust belong to?

HSR exhaust is a Chinese brand. Here are the specific details about HSR exhaust: 1. Features: HSR exhaust uses the highest-grade 304 stainless steel pipes and titanium alloy pipes in China, ensuring smooth airflow when passing through the exhaust pipes at high temperatures and speeds. Each exhaust system is precisely positioned at a 1:1 ratio on the chassis, significantly reducing installation time. 2. Working principle: It uses electricity as the energy source, then drives electromagnetic coils to perform switching and regulation functions. When the electromagnetic coils are energized, they generate magnetic force to overcome the pressure of the spring and drive the valve core to move.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.