···
Log in / Register

How to Repair Scratches on Car Lights?

4 Answers
DeJourney
08/30/25 5:52am

Car light scratches can be repaired by following these steps: 1. Clean the dust and dirt on the surface of the headlights; 2. Use tape to cover and protect the areas around the headlights that do not need refurbishment; 3. Sand the surface with water sandpaper; 4. After sanding, remove the powder, then use a towel dipped in polishing wax to polish in a circular motion. Car lights are mainly used to provide illumination during daily use, at night, or in poor visibility conditions, and to warn other vehicles, ensuring driving safety. The maintenance methods for car lights include: 1. Regularly check the lamp cover to avoid water droplets; 2. Replace the headlights regularly; 3. Adjust the height of the headlights properly; 4. Use high-quality bulbs; 5. Prevent foreign objects from hitting the lights; 6. Try to park the car in the shade to avoid direct sunlight.

Was this review help?
13
3
Share
DeKennedy
09/12/25 2:57am

Dealing with headlight scratches is quite simple, and I've tried DIY repairs myself. First, thoroughly clean the surface of the light to remove any dust; apply some regular toothpaste, then use a clean cloth to vigorously polish for a few minutes until it feels smooth. After that, wipe it clean with a damp cloth, and you'll see the scratches are much lighter. This method is very effective for minor scratches, costing nothing and saving trouble. For deeper scratches, try a dedicated car repair kit, which costs just a few dozen yuan and includes sandpaper and protective wax. The key is not to grind randomly; movements should be even to avoid damaging other parts. After my last repair, the brightness of the light improved significantly, making nighttime driving much safer. Also, pay attention to protecting the headlights during regular car washes and avoid hard rubbing with hands to prevent new scratches.

Was this review help?
5
0
Share
Expand All
NorahFitz
10/26/25 3:46am

Dealing with headlight scratches requires patience. As an experienced driver for many years, I suggest handling it case by case. For minor scratches, you can DIY: First, clean the lens with soapy water, dry it, then apply some polishing compound - a cheap kit will do. Gently sand with fine-grit sandpaper, then apply a protective layer. Don't rush, use light strokes. If the scratches are too deep or the lens is cracked, skip the DIY and go to a professional shop for evaluation - parts may need replacement to prevent water leakage affecting electrical systems. I've dealt with similar issues before - polishing significantly improved light transparency, saving money effectively. Remember to wear gloves during operation and protect surrounding paint to avoid accidental scratches. Regularly check your headlights' condition - early detection and treatment ensures safety first.

Was this review help?
12
4
Share
Expand All
AdrianaFitz
12/09/25 4:06am

Fixing scratches on car headlights basically involves three steps: cleaning, sanding, and protection. I've used a simple method myself: first clean the lens surface, squeeze some toothpaste and apply it evenly, then gently rub with a soft cloth for a few minutes; after wiping off the residue, the scratches will become lighter. For serious cases, buy a repair kit, which can solve the problem for just over ten yuan. Be careful not to over-sand to avoid damaging the lens cover. After treatment, the light will be brighter, improving driving safety. Prevention is also important—avoid vigorously wiping the headlights in dusty conditions.

Was this review help?
11
3
Share
Expand All
More Forum Discussions

What is the ground clearance of the 2021 Santana in mm?

The minimum ground clearance of the Santana is 130mm. Here are the relevant details: Body dimensions: The Santana is a joint-venture car, a compact model under the Volkswagen brand. The Santana measures 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm. Configuration: The Santana will no longer use the EA113 series engine, switching entirely to the latest EA211 series, which features technologies such as an aluminum cylinder block and modular cylinder head cover, making the engine lighter. The new Santana offers two displacement options: 1.4L and 1.6L. The 1.4L engine has a maximum output power of 90 horsepower (66kW) and a peak torque of 132Nm.
3
0
Share

What are the reasons for the slow lifting of the loader boom?

XG958 loader boom lifting slowly is mainly due to insufficient flow of pressure oil, as the speed of the hydraulic system's actuators depends on the flow rate. Other possible reasons include: severe external leakage of system components and connecting pipelines; deterioration of hydraulic oil; clogging, aging of the suction pipe filter, or air entering the system, causing insufficient hydraulic pump suction; internal leakage of the working pump leading to insufficient oil supply; internal leakage of the hydraulic cylinder; excessive clearance between the spool and valve body of the distribution valve; excessively low pilot pressure; excessively low pressure or poor sealing of the priority unloading valve, resulting in insufficient combined oil flow; low diesel engine speed.
18
3
Share

What Kind of Leather is Nappa Leather?

Nappa leather is genuine leather. There are four methods to distinguish between synthetic leather and genuine leather: Shape: Natural leather has an irregular shape, uneven thickness, and some natural imperfections on its surface. The smoothness and fineness of the surface vary, with the edges and belly areas usually being looser. Full-grain leather has visible pores and patterns, and the backside generally has a suede texture. In contrast, synthetic leather has uniform thickness, a smooth surface, no natural imperfections, and evenly distributed pores and patterns, with no suede texture on the backside. Water Drop Test: Natural leather absorbs water significantly, while synthetic leather does not. Tensile and Elasticity Test: Natural leather has excellent elasticity and tensile strength, whereas synthetic leather does not. Blow Test: Blow air onto the backside of the leather with saliva. If leakage occurs on the front side, it indicates genuine leather due to its 'reverse resistance property.' This property makes leather garments highly effective in keeping out cold while maintaining good breathability.
8
4
Share

How to fill in the validity period of an electronic driver's license?

First, you need to download the "Traffic Management 12123" app or log in to the official website of Traffic Management 12123. Open the app, log in, find the electronic driver's license section, and click to enter. Prepare the required materials, including a personal ID photo and your driver's license. Fill in the driver's license information and submit an electronic version of your ID photo taken within the last 6 months. Verify the information on your driver's license and other personal details, then fill in the required information on the interface.
19
5
Share

What to Do If Your Driver's License Has Expired Without Review?

You need to bring your ID card, driver's license, more than three one-inch white background color photos, and a physical examination form. Go to the hall of the vehicle management office to get a ticket from the queue machine and wait in line. When the designated window calls you, go to the window to handle the procedure. You need to pay the driver's license annual inspection fee and study road traffic safety laws and regulations as well as traffic accident case warning education for no less than three hours. After completing the relevant study, obtain the relevant proof of receiving the study, and then go to the window to complete the annual review procedure.
7
4
Share

What are the causes of motorcycle spontaneous combustion?

Motorcycle spontaneous combustion is mainly caused by electrical connectors or wires short-circuiting and sparking, generating high temperatures that ignite flammable paint, leaked gasoline, or other combustible materials. Therefore, electrical leakage or short-circuit sparks are key factors, and reducing fuel leakage is particularly important. The specific causes of spontaneous combustion are as follows: High-voltage ignition leakage and sparking: When the engine is running, the ignition coil reaches high temperatures, causing the insulation of the high-voltage ignition wires to soften, age, crack, or degrade. This allows the high-voltage ignition electricity to easily penetrate the insulation (at the cracked or damaged areas) and spark between the wire and the motorcycle frame (grounding). If these sparks come into contact with the paint on the frame or fuel tank, or with gasoline leaking from the carburetor, it can lead to ignition and combustion. Electrical or wire breakage sparking: All electrical components, switches, and wires typically carry low voltage, but if there is a break, poor contact, or insulation damage, a short-circuit spark can occur. Electrical failure and short-circuiting: A common example is the rear brake light failing due to contact point welding. Prolonged grounding can cause high current to pass through the wire, melting the insulation and leading to widespread electrical leakage. The resulting high temperatures can ignite flammable materials such as paint or leaked fuel.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.