How to Repair Scratches on Car Film?

What are the reasons for the engine fault light in Shandeka trucks?

The reasons for the engine fault light in Shandeka trucks may include turbocharging issues, unqualified exhaust emissions, clogged fuel injectors, throttle position sensor problems, and in some vehicles, transmission system faults are also indicated through the engine fault light. The specific reasons are as follows: Sensor issues: Sensors include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will cause the engine fault light to illuminate. Turbocharging issues: Intake turbocharging pipelines and turbochargers can also cause the engine fault light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metal noises, and blue or black smoke from the exhaust pipe. Exhaust issues: Rear oxygen sensors, catalytic converters, exhaust camshafts, and bearings. The most common issue is catalytic converter failure causing the engine fault light to illuminate. Factors such as using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, and engine fuel system faults can easily lead to catalytic converter failure. Anti-theft system: If the vehicle's electronic anti-theft system malfunctions or the anti-theft controller does not match the engine electronic controller, the anti-theft system can also cause the engine to malfunction, along with the engine fault light illuminating. Solutions: If this fault occurs, the vehicle should not be driven: Check if the vehicle's coolant is low, if the engine oil needs to be replaced or is low, clean the throttle, clean the intake tract, check if the spark plugs are functioning properly, and if the ignition coils are normal. The vehicle should not be driven with this fault.

4

3

Share

Where is the engine imprint number located on the Haval H6?

The engine imprint number of the Haval H6 is located on the engine block, specifically on the driver's side. After opening the engine hood, you can see it by looking downward. This number is required for vehicle registration. The Haval H6 is equipped with two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine, both paired with a 7-speed dual-clutch transmission. The 1.5-liter turbocharged engine delivers a maximum power of 110 kW, a maximum torque of 210 Nm, with the maximum power achieved at 5,600 rpm and the maximum torque available between 1,800 to 4,400 rpm. The 2.0-liter turbocharged engine produces a maximum power of 145 kW, a maximum torque of 345 Nm, with the maximum power achieved at 5,500 rpm and the maximum torque available between 2,000 to 3,200 rpm.

10

5

Share

What Causes the Sizzling Sound When Starting a Car?

Here are the reasons for the sizzling sound when starting a car: 1. Loose engine mount bolts causing improper installation of engine supports; 2. Loose or aged belts. Generally, you can attempt to fix this issue yourself. (1) For loose engine mount bolts, you can locate and tighten the specific screws yourself; (2) For loose or aged belts, you can replace them with a new one. 3. If the car hasn't been started for a while, the oil will return to the oil pan, resulting in less oil in the valve chamber. The lack of oil for sealing and lubrication in the valve chamber causes the sizzling sound heard from the bottom of the car when it is first started.

16

5

Share

Differences Between Manual and Automatic Transmissions?

Below are the differences between automatic and manual transmissions: 1. The primary difference between manual and automatic transmissions lies in the type of gearbox used. Manual transmission vehicles use a manual gearbox, while automatic transmission vehicles use an automatic gearbox. 2. A manual transmission requires the driver to manually shift gears by moving the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed changes. An automatic transmission, on the other hand, does not require the driver to shift gears manually; the transmission automatically selects the appropriate gear based on driving conditions. 3. There are significant differences in usage and structure between automatic and manual transmissions. Firstly, all operations in a manual transmission are performed by the driver, making it less convenient than an automatic transmission. However, manual transmissions have advantages such as a simpler structure, lower manufacturing costs, cheaper maintenance, lower failure rates, higher transmission efficiency, and better fuel economy.

14

0

Share

How to unlock the anti-theft lock on a Haval H6?

It is recommended that the owner have a professional from the 4S shop unlock the anti-theft lock on the Haval H6 and not attempt to unlock it themselves. The Haval H6 is positioned as an urban intelligent SUV, with dimensions of 4640mm in length, 1825mm in width, and 1690mm in height, and a wheelbase of 2680mm. The Haval H6 is equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine has a maximum power of 110 kilowatts and a maximum torque of 210 Newton-meters, with a maximum power speed of 5600 revolutions per minute and a maximum torque speed ranging from 1800 to 4400 revolutions per minute. The 2.0-liter turbocharged engine has a maximum power of 145 kilowatts and a maximum torque of 345 Newton-meters, with a maximum power speed of 5500 revolutions per minute and a maximum torque speed ranging from 2000 to 3200 revolutions per minute.

20

0

Share

What are the operating steps for a wheel alignment instrument?

Below are the operating procedures for a wheel alignment instrument: 1. Check whether there are gaps or damages in the vehicle's suspension device, wheel bearings, steering system, etc. The maximum allowable tread depth difference for tires on the same axle is 2mm. The tire inflation pressure should comply with regulations. The vehicle should be equipped with full weight. 2. Drive the vehicle onto the four-post lift and stabilize it, ensuring the vehicle's center aligns with the lift and turntable center. Check and, if necessary, modify the vehicle specifications. 3. Operate strictly according to the steps displayed by the alignment instrument, with no omissions allowed. For example, perform wheel deviation compensation and tire inspection as required. 4. The adjustment of each wheel's alignment parameters (toe-in, camber angle) should comply with the requirements of the respective vehicle model's "service manual." Any parameters that do not meet the specified requirements should be adjusted (except for those that cannot be adjusted on the original vehicle).

1

0

Share

How to Repair Scratches on Car Film?

What are the reasons for the engine fault light in Shandeka trucks?

Where is the engine imprint number located on the Haval H6?

What Causes the Sizzling Sound When Starting a Car?

Differences Between Manual and Automatic Transmissions?

How to unlock the anti-theft lock on a Haval H6?

What are the operating steps for a wheel alignment instrument?

What are the reasons for the Buick Excelle not responding when starting?

What to Do When the Trunk Door of Great Wall Haval H6 Won't Open?

How to use the rain-sensing wipers on the Volkswagen Teramont?

What is the difference between the Haval H6 Blue Label and Red Label?