···
Log in / Register

How to Repair Exposed Primer on Car Bumper?

4 Answers
JulianDella
09/02/25 4:48am
For repairing exposed primer on a car bumper, you can choose to use a touch-up paint pen or go to a repair facility. Here is a detailed introduction to repairing the exposed primer on a car bumper: If the paint surface is not damaged: Use toothpaste and a cloth to wipe the area. If it can be wiped off, that's fine. If not, you can go to a repair facility and use a polishing machine with polishing wax for polishing treatment. If the scratch is relatively shallow: Use a touch-up paint pen for repair. If the primer is exposed: Go to a repair facility for repair and repainting. This will make the car's appearance look neater. Moreover, with current techniques, the color difference after repainting won't be very noticeable.
Was this review help?
20
5
Share
ODaisy
09/14/25 6:58am
Last time my car's bumper got scratched and the primer was exposed, so I tried to fix it myself. First, I thoroughly cleaned the damaged area with soapy water and a microfiber cloth to remove dirt. Then, I gently sanded the exposed primer with fine sandpaper to roughen it up for better adhesion. Next, I bought a car touch-up pen that matched the original paint code and applied several thin coats, checking the result after each layer dried. Finally, I used polishing wax to smooth it out. The whole process requires patience and should be done in a shady area to avoid dust. It cost me about 60 yuan, and the tools were simple yet practical. Small issues can be fixed at home, saving money and improving DIY skills. Remember to address light scratches early to prevent worsening, and protect the paint when washing the car.
Was this review help?
11
1
Share
Expand All
Ezra
10/28/25 7:41am
Considering cost, bumper primer-exposing repairs vary by individual. For small scratches, DIY is cheaper—a touch-up pen costs 20-50 RMB and is easy to use; larger damage requires professional repair costing hundreds. Last time at a shop, I paid 400 RMB to fix it. Is insurance worth it? For minor issues, it may not be cost-effective due to long-term premium impacts. Prevent scrapes by parking carefully to avoid unexpected expenses. DIY suits tight budgets for minor damage, but deeper damage is safer to spend on—use primer and color-matching paint for durability, avoiding cheap low-quality products. Balance cost and results to ensure bumper longevity.
Was this review help?
12
4
Share
Expand All
OKatherine
12/11/25 7:58am
Safety first, exposed bumper primer must be addressed promptly. Plastic surfaces exposed to moisture are prone to corrosion, affecting structure; minor scratches can be cleaned and touched up with a paint pen yourself, but major damage requires professional repair shops. They use professional spray painting tools to ensure even coating and rust prevention, avoiding potential hazards. Experience shows that delaying repairs leads to expanded damage that's harder to fix. Preventive measures include regular vehicle inspections and careful driving. After repairs, ensure the paint surface is smooth and rainproof, with driving safety as the top priority.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

Is it necessary to change tires when replacing rims?

If the replaced rims are of the same model, there is no need to change the tires. However, if the new rims are larger or smaller than the original ones, it is necessary to replace the tires to match them. The width of the rim determines the width of the tire. Changing to rims of different sizes can disrupt the manufacturer's original suspension settings for the vehicle, causing imbalance. The following points should be noted when replacing rims: 1. When replacing rims, pay attention to the rim diameter size and try to maintain the same diameter as the original factory specifications. 2. Also, be mindful of the rim width, which should be kept within a certain range to avoid reduced power and increased fuel consumption in the car.
5
3
Share

Car Battery Dead and Unable to Start?

If the battery is dead and the car won't start, you can wait for the tachometer and speedometer to return to their positions after turning the key before attempting to start again. If the car was started and then immediately turned off during the last attempt, waiting several hours before trying again may make it harder to start. Here are some methods for engine maintenance: 1. Maintain the Three Filters: The three filters refer to the gasoline filter, air filter, and oil filter. These filters play a crucial role in protecting the engine by filtering oil, gasoline, and air, thereby improving the engine's efficiency. Maintaining the three filters is essential for engine care. 2. Regularly Clean the Car's Crankcase: During engine operation, high-pressure unburned gases, sulfur, moisture, nitrogen, and acid oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These substances mix with metal particles from long-term wear, forming sludge. Therefore, it is necessary to regularly clean the crankcase to keep the engine's interior clean.
5
2
Share

Do I need a wheel alignment after getting a tire balance?

Tire balance does not require a wheel alignment. Tire balancing only adjusts the weight distribution of the tires and is generally necessary whenever the tires have been 'moved.' On the other hand, wheel alignment adjusts the angle coefficients of the vehicle's chassis system and is a maintenance procedure, so it should not be done unnecessarily. Wheel alignment is based on the four-wheel parameters of the vehicle and ensures optimal driving performance and reliability. Situations that require a wheel alignment include: 1. After repairing a tire collision accident. 2. After replacing steering system components. 3. After replacing or adjusting the suspension system. 4. Uneven wear on one side of the front or rear tires. 5. Heavy steering or floating and shaking while driving. 6. The car pulls to the left or right when driving straight.
13
2
Share

How to Start a Ford Focus?

Ford Focus Correct Starting Steps: 1. The driver sits down and fastens the seat belt; 2. Press the brake pedal and turn the key to start the vehicle; 3. Shift the gear to D, then release the handbrake and the brake pedal; 4. After completely releasing the brake pedal, press the accelerator to drive away. Here is a brief introduction to the Ford Focus: 1. The name 'Focus' means 'focus', and it is one of the flagship models of Ford Europe. One year after the launch of the three-box Focus, Changan Ford introduced three two-box Focus models, corresponding to the 1.8 manual classic, 1.8 automatic fashion, 2.0 manual sport, and 2.0 automatic sport versions of the three-box model. 2. The Focus's Duratec-HE reverse-mounted aluminum alloy engine is made of all-aluminum material with a reverse-mounted design. It has a maximum power of 104kW and a maximum torque of 180N·m (2.0L engine). Combined with the VIS (Variable Intake System) variable inertia intake device and plastic-steel equal-length intake manifold, it demonstrates advantages such as agile acceleration, smooth operation, efficient intake, low noise, and low fuel consumption.
5
1
Share

What are the operating steps for an automatic transmission?

Operating steps for an automatic transmission are as follows: Turn on the power without ignition (self-check); Press the brake, shift to N gear, ignite; Then push N gear to D gear; Release the handbrake; Release the foot brake; Press the accelerator; Start moving. Most automatic transmission vehicles have P, R, N, D gears. P stands for Parking gear, R for Reverse gear, N for Neutral gear, and D for Drive gear. The specific operating steps for an automatic transmission are as follows: 1. Press the start button once, at this time the ACC light is on, then press it once more, and the vehicle will perform a self-check. 2. Press the brake, then press the start button again to ignite and start, shift to D gear, and release the handbrake. (After long-term parking, it is necessary to warm up the car for 1-2 minutes in place) 3. Slowly release the foot brake and start moving.
3
1
Share

Is the coolant for the BMW 5 Series exclusive?

BMW 5 Series does not require exclusive coolant. Any brand of coolant that matches the original factory quality and has the same composition can be used. Different brands of coolant have varying production formulas. If mixed, chemical reactions between multiple additives may occur, leading to additive failure. Composition of coolant: The main components of coolant are: 50% pure water, 40% methanol, and 10% other substances. Types of coolant: Coolants are generally divided into three types: ethanol-water type, glycerol-water type, and ethylene glycol-water type. How to choose coolant: The basic indicators of coolant are freezing point and boiling point. The market offers coolants with freezing points of -15°C, -25°C, -30°C, -40°C, etc. It is advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your region.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.