How to Repair Car Paint?

2 Answers
JessicaMarie
07/24/25 7:08am
The methods for repairing car paint are as follows: 1. Minor Scratches. They can be completely repaired by waxing. Apply the compound in straight lines, then apply wax. You can start with coarse wax, followed by fine wax, moving from the inside out in the same direction to remove minor scratches. 2. Scratches Without Primer Damage. For slightly larger scratches, a touch-up pen can be used as a remedy. Before use, shake the paint inside the touch-up pen thoroughly. You can add a certain amount of thinner to the touch-up pen to ensure smooth application. Carefully spray the area that needs repair, and after the touch-up paint has dried, apply fine wax.
Was this review help?
14
3
Share
OCatherine
08/11/25 2:51am
I've tried repairing car paint myself a few times, it's quite simple. Start with washing the car, thoroughly clean the damaged area with soapy water to ensure no dust or stains remain. Then gently sand with fine sandpaper to smooth out the area around the scratch. For small dents, use filler to level them before sanding smooth. Painting is the key step: buy a matching spray can, select the correct color code based on your car's color code. Spray from about 30 cm away, apply a thin layer, wait ten minutes to dry before applying the second layer. Remember to avoid spraying too thickly as it may run and become uneven. After drying for about an hour, polish with polishing compound to make it look brand new. This method is suitable for small damages; I spend at most an hour to save dozens of dollars, but for large damages, it's better to go professional. Regular waxing helps prevent new damages. Just make sure the color matches well, or it will look bad.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

Is the Geely Emgrand GL a Three-Cylinder Engine?

Geely Emgrand GL is available with both three-cylinder and four-cylinder engines. The 1.5TDCT Luxury and 1.5TDCT Premium models are equipped with three-cylinder engines, while other models feature four-cylinder engines. Exterior Design: The Emgrand GL continues Geely's new family-style design elements, incorporating the concept of simple and elegant biomimetic aesthetics. The shield-shaped water ripple grille is treated with a floating design, seamlessly integrated with sharp eagle-eye projection headlights, creating a hawk-beak-inspired floating front face. Interior Configuration: The car adopts an aviation-inspired wraparound cockpit design and the family-style arched bridge instrument panel. The control console features a layered integrated center console design, which is simple yet elegant. Metal trim strips blend with the streamlined interior door handles, highlighting a refined touch amidst simplicity. Powertrain Configuration: The vehicle is equipped with 1.3T and 1.8L engines, paired with a 6DCT dual-clutch transmission and an Aisin 6-speed manual transmission for consumer choice. The 1.3T engine combined with the 6DCT transmission forms a golden powertrain combination, offering smooth performance and good fuel economy, with a combined fuel consumption of 5.9 liters per 100 kilometers under comprehensive driving conditions.
14
5
Share

Is it illegal to change car fog lights to cyan?

Changing car fog lights to cyan is illegal. According to regulations, fog lights must emit white light. Modifying them to other colors violates vehicle technical requirements and compromises traffic safety. Vehicle lights are not merely decorative luminous components; their color, luminous intensity, and illumination are strictly regulated. Only when both the lights and the entire vehicle meet legal standards are they approved for market sale. The function of fog lights: Fog lights generally refer to automotive fog lights. Installed at the front and rear of a vehicle, they are used to illuminate the road and provide safety warnings during rainy or foggy conditions, enhancing visibility for both the driver and other road users. Modifications to vehicle lighting must comply with the following requirements: Annual inspection regulations stipulate that dipped beam headlights must have a minimum brightness of 1050 lumens, and high beam headlights must have at least 1450 lumens. Excessive brightness of light bulbs will also result in failure during the annual inspection. Color temperature is restricted to no more than 6000K, as excessively high color temperatures not only appear more glaring but also significantly reduce penetration in rain or snow, adversely affecting driving safety. Scattered light is prohibited. When modifying headlights, it is essential to install lenses rather than merely replacing the bulbs.
19
0
Share

What Could Be the Reason When a Car Suddenly Fails to Start?

The sudden failure of a car to start could be due to insufficient battery power, preventing successful ignition during startup. It might also be caused by a malfunction in the starter motor, damage to components in the vehicle's ignition or fuel injection systems, or the possibility that the driver mistakenly placed the car in the wrong gear during ignition, preventing the engine from starting. Below are specific reasons: Fuel Quality Issues: Some fuels may leave water and sediment in the tank after use. Therefore, it's essential to refuel at reputable gas stations. When traveling, you can use a gauze wrapped around the fuel nozzle to filter out impurities. Lack of Antifreeze: Poor-quality antifreeze can cause the entire cooling system to freeze in extremely cold winter conditions, leading to engine block cracks. This prevents the car's water pump from functioning, resulting in failure to start and potential damage to other engine components. Excessive Carbon Buildup in the Vehicle: A solution is to frequently drive at high speeds to reduce carbon deposits. Additionally, before starting the car, turn the key to the ON position, then back, and finally to the START position to ignite. This allows the computer to calculate the water temperature and optimal air intake, making ignition smoother.
15
1
Share

Which engine oil is best for Audi A3?

Audi A3, both 1.4T and 2.0T models use 5w40 (5L) fully synthetic engine oil with a replacement interval of 10,000 kilometers. You can choose international brands like Shell, Castrol or domestic brands such as Great Wall, Tongyi and Kunlun. Below is the replacement method for Audi A3 oil filter: 1. Remove the engine cover. (Simply detach four clips) 2. Use a lift to raise the vehicle or employ an electric oil pump for direct extraction. Remove the dipstick, insert the extraction tube into the dipstick port - the tube must reach the bottom to completely drain the oil. The extraction process takes about 20 minutes; collect the extracted oil in an old container to prevent pollution. 3. After oil extraction, use a socket and wrench to remove the oil filter, clean any excess oil at the contact point, then install the prepared new oil filter. 4. After adding new oil, check the filling quantity using the dipstick. When pulling out the dipstick for the first time, wipe it clean with a tissue before reinserting; the second withdrawal determines the oil level. The dipstick has upper and lower limit marks - the oil level should be between these two marks for normal operation.
1
1
Share

Which Gear to Use When Driving Downhill?

For automatic transmission vehicles, you can use the D gear when driving downhill, or the L gear if available. When descending a mountain or a long slope, shifting to the L gear restricts the vehicle to the lowest gear (equivalent to first gear in a manual transmission), allowing the engine to assist in braking. This prevents the driver from having to continuously apply the brakes, which can overheat the brake pads and pose a danger. Most vehicles have five gears: P, R, N, D, and S. Below is an introduction to these gears: P (Parking) - Used when the vehicle is parked and not in use. In this position, the wheels are mechanically locked to prevent rolling. The P gear should only be engaged when the vehicle is completely stopped to avoid damaging the automatic transmission. R (Reverse) - Used for reversing. Never shift to R unless the vehicle is fully stopped, as this can severely damage the transmission. N (Neutral) - Used for temporary stops (e.g., at a red light). This position indicates neutral, and the brake must be applied to prevent rolling on a slope. D (Drive) - Used for normal driving on regular roads. S (Sport) - Indicates sport mode. In this position, gears can be freely switched, but the shifting is delayed to keep the engine at higher RPMs for increased power. This mode will result in higher fuel consumption.
12
3
Share

What are the differences between the Mercedes-Benz GLB200 and GLB250?

The Mercedes-Benz GLB200 is a compact SUV, while the GLB250 is a luxury compact SUV. The differences between the two are as follows: Different appearances: The Mercedes-Benz GLB200 adopts a bold style, with a square and straight front face design, using lines with right-angle curves to give the entire front end a bold flavor. The corners are slightly rounded, revealing an elegant touch. The Mercedes-Benz GLB250 features a minimalist style, with an overall design similar to the GLS. The trapezoidal wheel arches are quite rugged, complemented by densely-spoked black wheels that enhance the sporty and bold look. The lower bumper of the taillights is designed in black with added diffusers, increasing the sporty feel. Power aspects: The Mercedes-Benz GLB200 is equipped with a 1.3T four-cylinder engine, delivering a maximum power of 120kW, up to 163 horsepower, and a peak torque of 250Nm. The 0-100km/h acceleration time is approximately 9.1 seconds, paired with a 7-speed dual-clutch transmission. The Mercedes-Benz GLB250 is powered by a 2.0-liter turbocharged engine, with a maximum output of 224 horsepower and a peak torque of 350Nm. The transmission system is matched with an 8-speed dual-clutch gearbox and comes with Mercedes' 4Matic all-wheel-drive system.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.