···
Log in / Register

How to Repair a Water-Damaged Airbag Control Module?

1 Answers
LaConnor
09/07/25 7:20am

When an automotive airbag control module malfunctions and requires repair, the main instruments involved include an airbag control module adapter and the corresponding airbag control module editor. Using diagnostic interface repair technology allows for the repair of the airbag control module without removing it, by simply plugging the airbag control module repair tool into the vehicle's diagnostic interface. All that is needed is to connect its terminals to the repair tool's plug, meaning only the positive and negative power supply and the K-line wiring of the airbag control module need to be connected. Keep a lint-resistant jacket in the car and wear it while driving; try to sit in the back seat and avoid driving yourself. Avoid wearing clothes that easily produce lint while driving.

Was this review help?
15
4
Share
More Forum Discussions

What are the reasons for a car having power but not starting?

The reasons for a car having power but not starting are as follows: 1. Wrong gear position. When parking and turning off the engine, the gear was not shifted to P but directly left in D. Neither D nor R gear positions can start the engine. 2. Out of fuel. Apart from a dead battery, lack of fuel will also prevent the engine from starting. 3. Fuel pump failure. If the starter operates normally when attempting to start, check the fuel lines to see if the fuel pump is the issue. 4. Starter malfunction. A faulty starter can also prevent the engine from starting. 5. Excessive carbon buildup in the throttle. In this case, slightly pressing the accelerator may help start the engine. 6. Faulty crankshaft position sensor. When starting, the engine's computer cannot receive the signal and thus cannot control the spark plugs to ignite.
13
4
Share

What kind of engine oil is suitable for Changan CS35?

For Changan CS35, SL-grade 5W30 engine oil is recommended. Engine oil serves functions such as lubrication, cleaning, sealing, buffering, rust prevention, and heat dissipation. Taking the 2017 Changan CS35 as an example, it belongs to the compact SUV category, with body dimensions of: length 4170mm, width 1810mm, height 1670mm, a wheelbase of 2560mm, a fuel tank capacity of 52 liters, and a curb weight of 1270kg. The 2017 Changan CS35 features a MacPherson strut independent front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 125PS, a maximum power of 92kW, and a maximum torque of 160Nm, paired with a 5-speed manual transmission.
17
3
Share

How Does the Cooling System Work?

The working principle of the cooling system is: when the engine temperature rises, the engine water circulation thermostat opens, allowing the engine coolant to enter the large circulation loop. The engine drives the cooling fan to rotate, dissipating heat from the engine. The cooling system consists of a radiator, cooling fan, water pump, thermostat, coolant temperature gauge, water jacket, water pipes, coolant expansion tank, and coolant temperature sensor. The functions of the cooling system are: 1. Adjust the cooling intensity based on the engine's load, speed, and temperature changes to ensure rapid warm-up and maintain normal operating temperature; 2. Provide different cooling intensities for different parts of the engine; 3. Dissipate the heat generated during engine operation into the air, ensuring the engine operates within the appropriate temperature range.
2
0
Share

How to Turn on the Fog Lights on a Ford Focus?

The fog light button for the Ford Focus is located on the headlight switch. Turn the switch to the right to the second position for the headlights, then pull up one notch for the front fog lights, and another notch for the rear fog lights. Below is additional information on using the lights in a Ford Focus: 1. The light switch is either a rotary handle or a dial type. Turning it one position activates the parking lights (commonly known as small lights), and turning it further activates both the parking lights and the headlights (commonly known as high beams). Switching between high and low beams is mostly achieved by lifting/pressing the handle. 2. When meeting another vehicle at night, switch to low beams when the oncoming vehicle is more than 150 meters away. 3. Use low beams when meeting non-motorized vehicles on narrow roads or bridges at night. 4. When a motor vehicle passes through an intersection controlled by traffic lights at night, use low beams when turning.
3
5
Share

How to Compensate for Scratching an Unsold New Car?

After scratching an unsold new car, the 4S store has the right to claim damages for the act of scratching the new car, and may also request the assumption of other civil liabilities. Below are relevant details: 1. Legal Provisions: According to the relevant laws, "Property Law of the People's Republic of China": If real estate or movable property is damaged, the right holder may request repair, re-manufacturing, replacement, or restoration to the original condition. If property rights are infringed upon, causing damage to the right holder, the right holder may claim damages or request the assumption of other civil liabilities. 2. Special Circumstances: For non-commercial vehicles that cannot continue to be used, reasonable expenses for usual alternative transportation may be incurred. Beyond the above scope, courts generally take a conservative stance on depreciation losses, tending not to support them in principle. Of course, in a few extreme cases, appropriate compensation may be considered, but this must be handled cautiously and strictly controlled.
20
0
Share

What documents are needed to replace a vehicle license?

To replace a vehicle license, you need to bring the "Application Form for Replacement of Motor Vehicle License Plates and Certificates", the identity proof of the vehicle owner, the "Motor Vehicle Registration Certificate", and 2 vehicle photos (digital photos must be taken at the vehicle management office). The relevant details are as follows: 1. Conditions for replacement: If the motor vehicle license plate or vehicle license is lost, missing, or damaged, the vehicle owner should apply for a replacement at the vehicle management office of the registration location. 2. Processing time: The vehicle management office will review the submitted proofs and documents and retrieve the license plates or vehicle licenses that are not lost, missing, or damaged. The replacement vehicle license will be issued within one day from the date of acceptance. 3. Validity period: During the replacement of license plates, a temporary vehicle license plate with a validity period of no more than 15 days should be issued.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.