How to Repair a Hole in a Car Chassis?

1 Answers
DeKarter
07/29/25 3:15pm
Specialized tar cleaner can quickly penetrate and dissolve asphalt, effectively removing tar and asphalt stains, providing excellent stain removal, cleaning, and polishing effects. Essential balm can also dissolve asphalt. Apply a few drops of essential balm on the asphalt surface of the car body, wait for 5 minutes, and then wipe it clean with a damp towel. Diesel can similarly dilute and dissolve asphalt. After dissolving the asphalt, simply wipe it clean. Use a soft brush or cloth dipped in turpentine or benzene solution to scrub, then wash with soap solution, and finally rinse with clean water.
Was this review help?
20
1
Share
More Forum Discussions

What is the fuel consumption on highways and ordinary roads?

Highway fuel consumption varies depending on factors such as engine displacement and driving speed. Generally, for most sedan models, driving at 100 km/h on highways consumes about 6-10 liters per 100 kilometers. On urban roads, fuel consumption tends to be higher, averaging around 7-14L per 100 kilometers on ordinary roads, which is also influenced by individual driving habits. Below are some methods to reduce fuel consumption: 1. Maintain proper tire pressure: The normal tire pressure range is usually between 2.3-2.5 bar. If the tire pressure is lower than this range, the increased contact area between the tire and the road surface results in greater friction resistance, leading to higher fuel consumption. 2. Regular vehicle maintenance: Timely maintenance ensures proper lubrication of the powertrain system by the engine oil and helps detect potential vehicle issues early, reducing carbon buildup, which in turn aids in lowering fuel consumption.
3
2
Share

What is the displacement of a 20T car?

A 20T car has a displacement of 1.5 liters. Below is relevant information about displacement: Classification of displacement: In China, the classification of car levels is determined by the size of the displacement. Mini cars have a displacement of ≤1.0L; compact cars have a displacement ranging from 1.0L to 1.6L; midsize cars have a displacement ranging from 1.6L to 2.5L; executive cars have a displacement ranging from 2.5L to 4.0L; and luxury cars have a displacement of >4.0L. Automobile displacement: Displacement, a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or discharged per stroke or cycle. Car displacement is an important parameter for measuring a vehicle. Some domestically produced cars do not have the car model displayed at the rear as mentioned above, but their displacement is usually indicated on the body or rear of the car.
6
3
Share

What is the CMDTCS fault code?

CMDTCS refers to a traction system malfunction. Issues with the traction system can lead to reduced fuel injection, such as clogged injectors, low fuel pressure, or impurities in the gasoline. Inspect and replace the air flow meter or oxygen sensor if necessary, as inaccurate air measurement can cause discrepancies between the detected and actual air intake. Additionally, inaccurate closed-loop feedback signals, such as a faulty oxygen sensor, can contribute to the problem. Causes of traction system malfunction: Reduced fuel injection due to fuel system issues like clogged injectors, low fuel pressure, or impurities in the gasoline; inaccurate air measurement leading to mismatches between detected and actual air intake. If the detected air intake is lower than the actual intake, the PCM-calculated relative demand decreases, resulting in a lean oxygen sensor feedback signal. This causes the PCM to increase fuel injection, raising the positive fuel trim value. Inaccurate closed-loop feedback signals from the traction control system, such as a faulty oxygen sensor, can also be a factor. Solutions for traction control system faults: Replace fuel, injectors, spark plugs, or the fuel pump as needed.
9
3
Share

What are the major systems of a car?

A car consists of five major systems: the fuel supply system, the lubrication system, the cooling system, the ignition system, and the starting system. Car fuel: The fuel of a car is the combustible mixture formed by the combination of gasoline and air. The fuel supply system includes the fuel tank, fuel pump, gasoline filter, fuel injector, air filter, and intake manifold. Lubrication system: The lubrication system ensures the normal circulation of engine oil within the engine. The lubrication system includes the oil pump, oil filter, and oil passages. Ignition system: The ignition system is responsible for igniting the combustible mixture inside the engine. The ignition system includes spark plugs and high-voltage coils. Starting system: The starting system is used to start the engine and includes the battery and starter motor. Cooling system: The cooling system is responsible for removing excess heat from the engine. The cooling system includes the radiator, water pump, fan, and thermostat.
18
0
Share

Is it necessary to place a sunshade mat on the dashboard?

Whether to place a sunshade mat on the dashboard can be chosen based on personal circumstances. Here are the functions of placing a sunshade mat on the dashboard: Improve comfort: Since car dashboards are generally black, when the summer sun is abundant, it inevitably causes the temperature inside the car to rise too quickly. Adding a sunshade mat with a buffering effect on the dashboard can significantly reduce the rate of temperature rise inside the car, thereby improving comfort. Enhance driving safety: The glaring summer sunlight can affect the driver's judgment of the road and bring direct impacts. Placing a sunshade mat on the dashboard effectively solves this problem, enhancing driving safety.
9
2
Share

How many points can be deducted from a B2 driver's license to allow online learning?

B2 driver's license holders can opt for online learning if the accumulated demerit points within a scoring cycle are below 9. The following is relevant information about the B2 driver's license: Overview: The B2 license permits driving heavy-duty, medium-duty trucks or large, heavy, and medium-sized specialized operation vehicles. Heavy-duty and medium-duty trucks mainly refer to trucks, such as the large dump trucks commonly seen on roads transporting construction waste, which fall under the category of heavy-duty trucks. Large, heavy, and medium-sized specialized operation vehicles are those equipped with special devices or tools, such as water sprinklers, concrete mixer trucks, fire engines, etc. Note: Other vehicle types permitted under the B2 license include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery), which is the same as the B1 license.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.