How to Repair a Fender Dent?

1 Answers
DiMalachi
07/28/25 2:27pm
After disassembly, use a specialized hook to pry out the dent, then tap it back into place with a rubber mallet, using light to check for levelness. However, edges and reinforced areas cannot be treated this way. Alternatively, use a machine to suction out the dented portion, then tap it back with a rubber mallet. This method can also effectively repair reinforced areas.
Was this review help?
13
0
Share
More Forum Discussions

What causes the ABS and airbag warning lights to illuminate?

Fault warning lights indicate a malfunction in the airbag system, which may result in the airbags failing to deploy or deploying unexpectedly. Vehicle owners should be particularly vigilant about this issue. Common causes for the airbag warning light to illuminate include: 1. Disconnected or poor electrical connections: Solution: Start with the simplest checks by inspecting the airbag wiring under the seats. If any connectors are loose, simply reconnect them firmly one by one. 2. Faulty airbag sensor: Solution: Replace the driver-side side impact airbag sensor. 3. Airbag malfunction: Solution: Inspect the seat belt sensor, airbag connectors, and airbag sensors. 4. Faulty airbag control module: Solution: Replace the airbag control unit. 5. Presence of fault codes: Solution: Specialized diagnostic equipment is required to clear the fault codes.
18
0
Share

Is Rust on the Car Steering Column Normal?

Rust on the car steering column is a normal phenomenon. Here are the relevant explanations: 1. Rust protection: The steering column generally does not have paint coverage for rust protection, so after some time of use, a layer of rust will appear on the steering column. This is quite common for most mid to low-end cars. Even some high-end cars do not spend money on treatment because these parts are not directly visible to the car owner and pose no safety hazards, so many manufacturers do not treat the steering column. 2. Steering column: The steering column is the component that connects the steering wheel and the steering gear in the steering system. Through the steering column, the driver transmits torque to the steering gear, driving the steering gear to achieve steering. Common steering columns include hydraulic power steering columns, electro-hydraulic power steering columns, and electric power steering columns, each with different systems.
7
5
Share

What is a PVC Valve?

Car's PVC valve is a device in the forced ventilation system of the automobile engine's crankcase, composed of valve body, valve, valve cover, and spring. The following are the impacts of a faulty PVC valve on the vehicle: 1. The engine may shake during operation, with unstable idling, and a large amount of white smoke may emerge from the exhaust pipe. 2. Since it is located inside the crankcase, when it fails, it may cause internal corrosion, accelerate wear, and further shorten the engine's service life. 3. The engine may become difficult to start and exhibit poor acceleration. 4. Damage to the PVC valve can also lead to easy sedimentation and blockage of sludge. The blockage of sludge increases the pressure in the crankcase, causing oil and gas to flow back into the air filter, ultimately resulting in contamination and damage to the air filter.
5
4
Share

What does it mean when the p light keeps flashing?

The p light in a car is the brake system warning light, also known as the parking brake warning light. When the p light comes on, it indicates that there is a fault in the car's braking system. In such cases, the car should be pulled over immediately for inspection to avoid potential safety hazards. Below is an analysis of situations when the p light comes on: 1. Computer issue: When the car is initially powered on, the onboard computer performs a self-diagnosis check. During this time, all warning lights on the dashboard will illuminate. Once the check is complete, the warning lights will turn off. This is a normal phenomenon and does not require attention. However, if the warning lights remain on after the computer completes its self-diagnosis, it indicates a fault, and the car should be inspected and repaired as soon as possible. 2. Fault occurrence: If the brake system warning light comes on while driving, it means there is a fault in the car's braking system. This could be due to damaged brakes or the parking brake not being fully released. In such situations, the car should be pulled over for inspection to prevent any safety risks.
8
0
Share

Can I Wear Colored Contact Lenses for Subject 3 Driving Test?

You can wear colored contact lenses for the Subject 3 driving test. Below are the specific details about Subject 3: 1. Time Arrangement: Generally, there is no time limit for the Subject 3 test, except in some regions. Applicants need to bring their identity documents to the scheduled test location and time. Failure to attend on time will result in a failed test. If unable to attend at the scheduled time, applicants should apply to cancel the appointment at the vehicle management office one day in advance. 2. Regulations: There are five opportunities to schedule the Subject 3 road driving skills test. After scheduling, you can take the test once and have one retake opportunity. If you do not attend the retake or fail the retake, you must reschedule the test. If you fail the fifth scheduled test, all previously passed subjects will be invalidated, and the student will need to start over from Subject 1.
11
4
Share

What lights should be turned on when entering a tunnel in Subject 2?

When entering a tunnel in Subject 2, you need to turn on the headlights, which include high beam and low beam. Here is a detailed introduction to the classification of automotive lights: 1. Headlights: Combined headlights are located at the front of the car and mainly serve for illumination and signaling. The light emitted by the headlights can illuminate the road conditions ahead of the vehicle, allowing the driver to drive safely at night. 2. Combined taillights: Combined taillights are located at the rear of the car and mainly serve for illumination and signaling. 3. Turn signals: Used to indicate to other road users that the vehicle is turning left or right. Regulations require them to be amber. 4. License plate lights: License plate lights mainly illuminate the license plate, making it distinguishable at night.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.