How to Repair a Cracked Car Bumper?

1 Answers
CarsonAnn
07/30/25 10:50am
Car bumper crack repair operation method: Purchase a set of bumper repair tools, first polish around the broken bumper to remove surface dust and impurities, cut a suitable size of stainless steel repair mesh, and fill it in the bumper crack or hole. Use a special soldering iron to heat the stainless steel repair mesh around to achieve initial fixation, then use filling repair strips to melt and repair. After shaping, polish to restore the basic contour, and finally spray paint. The car bumper is the most prominent part of the body components and is prone to impact damage in traffic accidents. Cracking damage to the car bumper is a common form of damage. If the cracking damage is not repaired in time, it will not only affect the overall appearance of the vehicle, but the crack damage may also continue to expand during the use of the vehicle, seriously affecting driving safety.
Was this review help?
8
4
Share
More Forum Discussions

Is a residence permit required to buy a used car?

No residence permit is required to buy a used car. Below are the relevant details: 1. Overview: Whether purchasing a used car or a new car, a residence permit is not required. A residence permit is only needed when registering the motor vehicle, meaning non-local residents buying a car locally and applying for a local license plate need to provide a residence permit. 2. Additional notes: If the purchased used car is not an imported motor vehicle through customs or a motor vehicle exempt from safety technical inspection as stipulated by the competent department of motor vehicle products under the State Council, a motor vehicle safety technical inspection certificate must also be submitted. The vehicle management office should confirm the motor vehicle within two days from the date of accepting the application, verify the vehicle identification number and its imprint, review the submitted certificates and documents, and issue the motor vehicle registration certificate, license plate, driving license, and inspection qualification mark.
16
4
Share

What is the ground clearance of the Baojun 510 in centimeters?

Under full load, the minimum ground clearance of the Baojun 510 is 160mm. The minimum ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the car is fully loaded and stationary, which is used to evaluate the car's ability to pass obstacles such as rocks and tree stumps without collision. The heavier the body, the better the high-speed driving stability. Factors affecting the stability of a car at high speed include: 1. Vehicle tires: Tires are the only components in contact with the ground. Generally, wider and flatter tires improve the stability of the vehicle at high speeds. 2. Vehicle shape: The shape of the vehicle also affects its high-speed stability. Vehicles that are more aerodynamically designed tend to be more stable at high speeds. 3. Drive configuration: Most vehicle drive configurations include front-wheel drive, rear-wheel drive, and four-wheel drive. Four-wheel drive vehicles are more stable than front or rear-wheel drive vehicles. 4. Suspension system: Generally, vehicles with independent suspension systems are more stable than those with non-independent suspension systems. Independent suspensions include MacPherson strut independent suspension and multi-link independent suspension.
1
1
Share

Can modified LED headlights pass the annual inspection?

Modified LED headlights can pass the annual inspection, as headlights are not considered part of the vehicle's exterior and can easily pass the annual check. The annual inspection for headlights only focuses on two aspects: first, whether the brightness meets the standard (currently, there is only a minimum lumen requirement, with brightness not allowed to be lower than 1400 lumens), and second, whether the angle is qualified. As long as the angles of the high and low beams are correct, the inspection can be safely passed. A notable feature of LED headlights is that they are composed of numerous small, high-brightness LED bulbs, usually arranged in specific shapes, such as a light strip or a large continuous area. In contrast, xenon headlights are generally independent units, although some vehicle models may use dual xenon headlights.
3
5
Share

What are the steps for removing and installing car headlights?

The steps for removing and installing car headlights are: After opening the engine compartment hood, you can see the dust cover behind the headlight assembly. Simply unscrew it along the threaded direction, and then you will see the bulb base inside the headlight assembly. Pinch the wire clip spring next to the base, and once the clip is released, you can remove the bulb. During installation, simply reinstall it back into the car following the same steps. When replacing car headlight bulbs, the first step is to confirm the bulb socket of the vehicle and purchase bulbs with the corresponding socket for replacement. The replacement bulbs do not necessarily need to be original equipment manufacturer (OEM) parts, as long as the bulbs meet the required specifications. Disconnect the bulb's power socket, applying moderate force when pulling it out to avoid loosening the wiring or damaging the bulb socket.
1
4
Share

Does idling a car consume fuel?

Idling a car does consume fuel, as the engine burns fuel whenever it is running, though fuel consumption is relatively low during normal idle conditions. During idling, the engine is still operating but not transmitting kinetic energy to the drivetrain. According to the law of energy conservation, driving requires more work than idling, resulting in higher fuel consumption. Car idling refers to an operational state where the engine runs without load, meaning the transmission is in neutral. The engine speed during idling is called the idle speed, which can be adjusted by modifying the throttle opening. Idling means the engine is running without delivering power; when the accelerator pedal is fully released, the engine enters idle mode. Adjusting idle speed should avoid sudden fluctuations to prevent premature engine wear.
8
1
Share

How to Deal with Engine Oil Leakage?

Oil leakage will definitely cause a significant loss of engine oil, and the cause should be identified immediately for repair. Here is some knowledge about car oil leakage: 1. Causes of oil leakage: Seepage is more related to the poor sealing of rubber seals, while leakage is likely due to direct rupture of the sealing area, such as cylinder block cracking or damage to related components. 2. Engine oil seepage phenomenon: If the engine shows obvious oil seepage, it is likely to significantly increase oil consumption. The consequence of oil loss is severe wear and tear on the engine.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.