How to Remove Windshield Scratches?

1 Answers
StellaRose
07/29/25 11:56am
Methods for removing glass scratches are as follows: 1. Toothpaste Polishing: (1) Clean the glass: Use a clean cloth to wash the glass, ensuring there are no debris or impurities on it, and let the glass dry in a clean environment. (2) Wet a microfiber cloth: Take a clean, lint-free cloth under warm running water. Wring the cloth until no excess water drips. Any foreign matter on the cloth, including dust or lint, can rub against the glass and cause uneven wear or more scratches. (3) Apply toothpaste to the cloth: Squeeze an appropriate amount of toothpaste onto the cloth based on the size of the scratch, adding more if needed. It's best to use white, non-gel toothpaste, especially those containing baking soda, as they are most effective for removing scratches. (4) Apply the toothpaste to the glass: Place the cloth with a drop of toothpaste on the scratched area and move it in small circular motions for 30 seconds. (5) Check the scratched area to see the effect, repeating until the scratches are gone. 2. Baking Soda Polishing: The method for baking soda polishing is the same as toothpaste polishing, except you first mix an appropriate amount of baking soda with water to form a paste, then proceed as with the toothpaste method.
Was this review help?
3
1
Share
More Forum Discussions

What transmission does the Volkswagen Magotan use?

The Volkswagen Magotan uses a 7-speed dual-clutch transmission. The dimensions of the 2019 Volkswagen Magotan are 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2871mm. The Magotan offers three powertrain options: The first, the 280TSI, is equipped with a 1.4T inline 4-cylinder turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum horsepower of 150 PS. The second, the 330TSI, features a low-power version of the 2.0T inline 4-cylinder turbocharged engine, also paired with a 7-speed dual-clutch transmission, producing a maximum power of 137 kW and a maximum horsepower of 186 PS. The third, the 380TSI, comes with a high-power version of the 2.0T inline 4-cylinder turbocharged engine, matched with a 7-speed dual-clutch transmission, offering a maximum power of 162 kW and a maximum horsepower of 220 PS.
9
1
Share

How to Turn on the Ambient Lighting in the 2020 Audi Q5L?

2020 Audi Q5L ambient lighting activation method: The ambient light switch is located on the center console, simply turn it on. Once activated, soft and naturally transitioning light will illuminate the dashboard lines and door panels, seamlessly blending with the interior for a comfortable and romantic ambiance. The Audi Q5L is a model under FAW-Volkswagen Audi, with body dimensions of 4753mm in length, 1893mm in width, and 1659mm in height, and a wheelbase of 2908mm. In terms of power, the Audi Q5L is equipped with two engines: a low-power version 2.0-liter turbocharged engine and a high-power version 2.0-liter turbocharged engine, both paired with a 7-speed dual-clutch transmission.
7
3
Share

What are the precautions for newly replaced brake pads?

Precautions for newly replaced brake pads are as follows: 1. Under normal driving conditions, the brake pads should be inspected every 5,000 kilometers. It is necessary to check not only the remaining thickness of the brake pads but also their wear condition, whether the wear on both sides is even, and whether they retract smoothly. Any abnormal conditions must be addressed immediately. 2. Some vehicles are equipped with a brake pad warning function. Once the wear limit is reached, the dashboard will alert you to replace the pads. Pads that have reached their usage limit must be replaced; even if they can still be used for a while, they will reduce braking effectiveness and affect driving safety. 3. Brake pads are consumable parts in a vehicle and will gradually wear out during daily driving. When the brake pads wear to their limit, they must be replaced; otherwise, braking effectiveness will be reduced, potentially leading to safety accidents.
3
4
Share

Is It Acceptable for the Rearview Mirror to Touch the Line During Reverse Parking?

In the Subject 2 driving test, if the rearview mirror touches the line during reverse parking, it is considered a failure. Other actions that result in a 100-point deduction include the vehicle body touching the line, not fully entering the parking space, stopping midway, not following the designated route, incorrect sequence of operations, or exceeding the time limit. The full score for Subject 2 is 100 points, with evaluation criteria that include failing, deducting 20 points, deducting 10 points, or deducting 5 points. The rules for the Subject 2 driving test state that any of the following will result in failure: stopping or rolling back during the test, not following the voice prompts, the wheels touching the line, or the vehicle body touching the line. Many learners encounter the issue of touching the line during Subject 2 training, and "touching the line" is the most common reason for failing. The main cause of this issue is not mastering the correct timing for steering. Besides missing the right moment to steer, another reason could be the steering speed not matching the vehicle's speed. Subject 2 Deduction Standards: Not wearing a seatbelt: Deduct 100 points. Starting the engine without the gear in neutral: Deduct 100 points. Not using the turn signal (including starting, changing lanes, overtaking, turning, or pulling over); using the turn signal for less than 3 seconds (note: this is easily overlooked!); forgetting to turn off the turn signal or using it incorrectly: Deduct 10 points. Stalling once: Deduct 10 points. Reverse Parking: Not following the designated route sequence: Deduct 100 points. Vehicle body crossing the line: Deduct 100 points. Not fully entering the parking space: Deduct 100 points. Before reversing, if both front wheels do not cross the control line: Deduct 100 points. Exceeding the 210-second time limit: Deduct 100 points. Stopping for more than 2 seconds midway: Deduct 5 points each time. Hill Start and Parking: After stopping, if the front bumper is not aligned with the pole line and exceeds 50 cm forward or backward: Deduct 100 points. After stopping, if the front bumper is not aligned with the pole line but does not exceed 50 cm forward or backward: Deduct 10 points. After stopping, if the start time exceeds 30 seconds: Deduct 100 points. Driving with wheels touching the road edge line: Deduct 100 points. Starting with the vehicle rolling back more than 30 cm: Deduct 100 points. After stopping, if the vehicle body is more than 50 cm from the road edge line: Deduct 100 points. After parking, not tightening the parking brake: Deduct 10 points per occurrence. After stopping, if the vehicle body is more than 30 cm but less than 50 cm from the road edge line: Deduct 10 points per occurrence. Starting with the vehicle rolling back more than 10 cm but less than 30 cm: Deduct 5 points each time. Parallel Parking: After parking, if the vehicle body crosses the line: Deduct 100 points. Not using or incorrectly using the turn signal when entering the parking space: Deduct 10 points. Exceeding the 90-second time limit: Deduct 100 points. Driving with the vehicle body touching the parking space edge line: Deduct 10 points each time. Driving with wheels touching the lane edge line: Deduct 10 points each time. Stopping for more than 2 seconds midway: Deduct 5 points each time. 90-Degree Turn: Wheels touching the road edge line: Deduct 100 points. Not using or incorrectly using the turn signal during the turn, or not turning it off after the turn: Deduct 10 points. Stopping for more than 2 seconds midway: Deduct 5 points each time. Curve Driving: Wheels touching the road edge line: Deduct 100 points. Stopping for more than 2 seconds midway: Deduct 100 points. Driving without shifting to second gear or higher: Deduct 5 points.
4
1
Share

What is the 0-100 km/h acceleration time of the Mustang GT?

According to official data, the Ford Mustang GT has two engine displacements. The 2.3L model achieves 0-100 km/h in 5.8 seconds, while the 5.0L model accomplishes it in 3.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. Greater torque means more force to propel the vehicle, resulting in naturally faster acceleration. For example, the Nissan Patrol 4.0 has a maximum torque of 394 Nm and achieves 0-100 km/h in 9 seconds. The Ford Mustang GT has a maximum torque of 434 Nm and accomplishes 0-100 km/h in 3.8 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to superior acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Ford Mustang GT is equipped with a 10-speed automatic transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). A higher power-to-weight ratio results in faster acceleration. For instance, the Nissan Patrol 4.0 has a power-to-weight ratio of 109 Hp/T and achieves 0-100 km/h in 9 seconds. The Ford Mustang GT 5.0L boasts a power-to-weight ratio of 175 Hp/T and accomplishes 0-100 km/h in 3.8 seconds.
5
1
Share

What type of adhesive is suitable for reattaching a sagging car headliner?

Polyurethane adhesive can be used for bonding. Cleaning precautions for car headliners: 1. The cleaning method varies depending on the material and color of the headliner. Light-colored fabrics can be cleaned with seat cleaner. 2. First, recline the seats and cover them with towels or seat covers to prevent contamination from water or cleaning solution dripping from the headliner. Then, fill a spray bottle with a diluted mixture of water and cleaner, and spray it onto the headliner. After the cleaner slightly foams, gently scrub with a soft brush using light pressure. Excessive force may cause pilling or damage the fabric.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.