How to Remove Wax Residue from Car?

Where is the 4A15J1 engine produced?

4A15J1 engine is domestically produced, an engine independently developed by GAC Trumpchi, equipped with high-pressure direct injection and small-inertia turbocharging system, which to some extent compensates for GAC Trumpchi's weak position in the engine field. The following are some introductions of this car: 1. The biggest highlight of GAC Trumpchi's latest generation 4A15J1 engine is that it meets the National VI B standard, followed by the upgrade of the cyclic injection method. The drawback of this machine is that the power performance is reduced to reduce emissions, but this situation will appear in many high-standard engines in the later stage. 2. The parameters of 4A15J1 are: maximum power 124kw, maximum horsepower 152Ps, peak torque 265 Nm (reaching the maximum torque requires 1700 rpm, continuous output to 4000 rpm), maximum power speed 5000 rpm, red line area starts from 6000 rpm.

8

3

Share

What are the functions of the 4-button key for the Buick Excelle?

The functions of the Buick Excelle key are as follows: 1. There are a total of three function buttons. The button on the top left is for unlocking—pressing it will automatically unlock the doors. 2. The button on the top right is for locking—pressing it will lock all doors. 3. The button below is for the trunk switch—pressing it will automatically open the trunk slightly, allowing you to lift the trunk lid manually. 4. The silver button is for key ejection—pressing it will automatically pop out the mechanical key. The steps to replace the battery in the Buick Excelle key are as follows: 1. Eject the mechanical key by pressing the silver button at the top of the key. 2. Use a flathead screwdriver to pry open the key cover. 3. Once the cover is open, you will see the battery compartment—remove the old battery using the screwdriver. 4. Insert the new battery with the positive side facing up. 5. Reassemble the key cover and mechanical key. 6. Test the key by locking and unlocking to ensure the doors can be properly locked/unlocked.

16

4

Share

Where is the Shandeka engine produced?

Shandeka engines are domestically produced. Shandeka has three vehicle series: C5H, C7H, and G7H, covering tractors, trucks, dump trucks, and special vehicles. Among them, the C5H tractor engine is from Weichai, while the C7H tractor, C5H truck, and C7H truck engines belong to Sinotruk's MC series. The C7H and G7H dump truck engines are from Sinotruk's MC series and Weichai. On July 15, 2009, MAN SE invested in Sinotruk, enabling Sinotruk to introduce its heavy-duty truck production technology. At the 2011 Shanghai International Automobile Industry Exhibition, Mr. Ma Chunjin, Chairman of the Board of Sinotruk Hong Kong Limited, and Dr. Georg Pachta-Reyhofen, CEO of MAN Group, jointly unveiled a new truck brand developed in collaboration between Sinotruk and MAN, marking the official birth of Shandeka.

8

3

Share

Can LED lights pass the annual vehicle inspection?

Whether LED headlights can pass the annual inspection depends on the specifications and performance of the modified headlights. If the color temperature, brightness, and beam angle of the modified headlights, which affect driving safety, meet the national requirements, they can pass the inspection. There are two main aspects to check: Whether the brightness meets the requirements, meaning the brightness must not be less than 1400 lumens. Whether the beam angle is up to standard, as long as the high and low beam angles are normal. Essentially, as long as the modified LED headlights do not compromise driving safety, they can pass the inspection. Relevant regulations for annual vehicle inspections: Vehicles that fail the inspection must be repaired within a specified period. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further driving. Vehicles that do not undergo the inspection without reason or fail the inspection are not allowed to drive on the road or be transferred. Vehicles that meet the scrapping conditions or exceed the prescribed service life will not be inspected, and their license plates will be revoked, their records deleted, and they will be scrapped.

7

0

Share

How often should the spark plugs of the Volkswagen Bora TSI engine be replaced?

Volkswagen Bora TSI spark plug replacement cycle: Under normal maintenance conditions, replacement is recommended after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is advisable to follow the instructions in the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. How spark plugs work: The ground electrode of the spark plug is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the center electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the center electrode, it ionizes the medium between the center electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder.

5

0

Share

What Causes the Wiper Motor to Make Noise?

There are primarily three reasons for the phenomenon where the wiper does not move but makes a buzzing sound: 1. The first reason is that the vehicle's windshield is not clean enough; secondly, the wiper blades have reached the end of their lifespan and can no longer be used; finally, the spring strength of the wiper gradually weakens as the vehicle ages. By troubleshooting the wiper based on these three reasons, the issue can generally be resolved; 2. If the driver notices the wiper scraping against the windshield or jumping during rainy weather, it is essential to find a sheltered spot to park the vehicle immediately. Avoid driving onto elevated roads or highways while enduring the annoyance. After parking, the first thing to check is not the wiper but the windshield; 3. So, how can the issue of a 'dirty film' on the windshield be resolved? It's actually not very difficult, but drivers need to adopt a habit of 'regular maintenance.' Regardless of how often the car is washed, to prevent the formation of a 'dirty film' on the windshield, it is best to clean the windshield with water once a week. In areas with severe air pollution, drivers can add an appropriate amount of alkaline cleaner to the water.

12

3

Share

How to Remove Wax Residue from Car?

Where is the 4A15J1 engine produced?

What are the functions of the 4-button key for the Buick Excelle?

Where is the Shandeka engine produced?

Can LED lights pass the annual vehicle inspection?

How often should the spark plugs of the Volkswagen Bora TSI engine be replaced?

What Causes the Wiper Motor to Make Noise?

How to Start After Stalling on a Slope?

What are the differences between the Mercedes-Benz E300L Fashion and Luxury models?

Can I wear sunglasses during Subject 2 driving test practice?

What are the differences between the Mercedes-Benz Vito and the Mercedes-Benz V260?