How to Remove Toyota Rearview Mirror Glass?

1 Answers
VonJustin
07/29/25 10:22pm
First, grip the cylindrical part of the interior rearview mirror and rotate it counterclockwise by 45 degrees to remove it. To reinstall, rotate it clockwise by 90 degrees. There is an adjustment lever beneath the rearview mirror housing for adjustments. When adjusting, use both hands to apply even force and make slight, small adjustments. This is part of the anti-glare adjustment, which generally allows for adjustments in all directions (front, back, left, and right). Avoid frequent adjustments, as this may cause the mirror to become loose. You can also adjust the height of the rearview mirror to suit your driving posture by moving it up or down. Adjust it to obtain the optimal position for a clear view of the rear. Do not adjust the rearview mirror while driving, as this may lead to operational errors, potentially causing accidents that could result in serious injury or even death.
Was this review help?
16
3
Share
More Forum Discussions

Where is the engine number located on the Hongqi H5?

Hongqi H5's engine number is located in the front middle-lower part of the engine, above the starter, at the junction between the cylinder block and the transmission. The Hongqi H5 is a mid-size sedan under FAW Hongqi, with a body length, width, and height of 4945mm, 1845mm, and 1470mm respectively, a wheelbase of 2875mm, and a body structure of a 4-door, 5-seater sedan. The Hongqi H5 is equipped with a 1.8-liter turbocharged four-cylinder engine across the entire lineup, paired with a 6-speed automatic transmission, delivering a maximum torque of 250 Nm, a maximum power of 137 kW, and a maximum horsepower of 186 hp.
12
0
Share

Is the Auto Start-Stop Light On Indicating It's Active?

When the auto start-stop light is illuminated, it indicates the system is deactivated. Upon initial vehicle startup, the auto start-stop function defaults to active status with no warning light displayed. If the system is manually disabled, the instrument cluster will display a notification - the start-stop indicator shows a circled 'A' with 'OFF' beneath it, and the yellow illumination signifies deactivation. The auto start-stop system automatically controls engine shutdown and restart sequences, putting the engine into temporary hibernation during brief stops, primarily designed for urban traffic scenarios like waiting at traffic lights or during congestion. When the engine is off, the electrical system takes over belt-driven functions to power components such as the engine cooling fan and cabin air conditioning, achieving fuel efficiency and emission reduction goals.
13
5
Share

What are the dimensions of the Forester?

The length, width, and height dimensions of the Forester are 4655mm/1815mm/1730mm, which are official data. The length of the Forester refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's support plane. The naturally aspirated engine of the Forester has a maximum power of 113kW and a maximum torque of 196 Nm. This engine reaches its maximum power at 5800 to 6000 rpm and its maximum torque at 4000 rpm. It is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a continuously variable transmission (CVT). The state has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the national regulation stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
2
3
Share

How does the adhesion of motor vehicles change with speed when driving on wet roads?

When driving on wet roads, the adhesion of motor vehicles decreases sharply as speed increases. Here are some precautions for driving in rainy weather: 1. Reduce speed: Regardless of road width or surface conditions, slow down when driving in the rain, always pay attention to the distance between vehicles ahead and behind, and be mentally prepared to take various emergency measures. Visibility is low in rainy weather, and the field of vision is poor. The emergency performance of vehicles, such as braking distance, will also be reduced, so it is necessary to slow down in advance, leaving sufficient time and space to handle situations to ensure safety. 2. Maintain distance: When driving in the rain, visibility is obstructed, so it is important to maintain a safe distance between vehicles, constantly observe the distance between vehicles ahead and behind, and increase the safety distance. Especially stay away from large vehicles, as they can block your view; moreover, large vehicles may pass through waterlogged areas that smaller vehicles cannot, and they are prone to splashing water waves, which can interfere with the driving of smaller vehicles. 3. Use fog lights when driving in the rain: Make full use of fog lights to enhance driving safety in rainy weather. If necessary, turn on the hazard warning lights so that vehicles behind can always be aware of the situation ahead. 4. Do not restart after stalling: In heavy rain or stormy weather, some road sections may become severely waterlogged in a very short time. If you have to drive through water, use a low gear and pass at a constant speed. If the vehicle stalls while moving, do not attempt to restart it. Blindly restarting may cause the engine to be scrapped. After the vehicle stalls, contact a professional repair shop promptly. Only after the maintenance personnel have inspected the vehicle on-site and confirmed that there are no problems can the vehicle be restarted.
1
1
Share

How Often Should the Nissan Sylphy Be Serviced?

The maintenance cycle for the Sylphy starts with the first service at 2,500 kilometers or three months after purchase, followed by servicing every 5,000 kilometers thereafter. The frequency of routine maintenance depends on the type of engine oil used: mineral oil should be changed approximately every 5,000 kilometers, semi-synthetic oil every 7,000 kilometers, and full-synthetic oil every 10,000 kilometers. It is recommended to visit a 4S dealership for a comprehensive evaluation based on driving needs and vehicle condition to determine the exact maintenance schedule. Below is an introduction to car maintenance: 1. Exterior Inspection: Before driving, check the doors, hood, trunk, and glass condition. Inspect the body for damage, tilting, oil leaks, or water leaks. 2. Engine and Various Fluids: Check the fastening of engine components and inspect for oil or coolant leaks at engine joints. Adjust and tighten belts as needed, and check the fastening of hoses and wiring. Top up engine oil, coolant, and battery electrolyte if necessary. 3. Tires: Inspect tire wear and clean the trunk. Replace tires when they approach the wear indicators. Check for bulges, abnormal wear, aging cracks, or other damage. 4. Cleaning and Lubrication: Clean grease from the engine compartment hood, door hinges, and trunk hinges, and lubricate them. Antifreeze typically has a lifespan of 2 years and should be replaced during maintenance, with a thorough cleaning of the cooling system. Due to the hygroscopic nature of the braking system, brake fluid should be replaced every two years.
7
0
Share

What Causes the Engine Malfunction Indicator Light to Illuminate?

Reasons for the engine malfunction indicator light illuminating: 1. Sensor damage, poor contact, or signal interruption; 2. Poor engine maintenance; 3. Low-quality fuel or engine oil; 4. Incomplete combustion of the air-fuel mixture; 5. Spark plug or ignition coil failure; 6. Fuel pump malfunction or fuel line blockage; 7. Clogged air conditioning filter. An engine is a machine capable of converting other forms of energy into mechanical energy, typically transforming chemical energy into mechanical energy. This includes internal combustion engines, external combustion engines, jet engines, electric motors, etc. It can refer to both the power generation device and the entire machine including the power unit.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.