How to Remove the XTS Air Conditioning Filter?

[SanAdeline]

xts air conditioning filter removal method: 1. Pull out the glove compartment on the passenger side. 2. Pull outward on the fixed handle on the left side of the glove compartment. 3. Remove the buckle from the handle. 4. Push the glove compartment simultaneously on both sides to remove it. 5. The air conditioning filter will be visible; press firmly on the fixed buckle to remove the filter. Cadillac XTS introduction: 1. Body dimensions: length, width, and height are 5131mm, 1852mm, and 1501mm respectively, with a wheelbase of 2837mm. 2. Powertrain: two differently tuned 2.0T turbocharged direct injection engines are available, with maximum power outputs of 184kW and 198kW respectively, both with a peak torque of 400Nm.

[StHolden]

A while ago, I helped a friend with their Cadillac XTS, and replacing the cabin air filter was actually quite easy. Locate the glove compartment on the passenger side, open it, and carefully look towards the rear—there’s usually a small cover panel secured with plastic clips. Gently press or use a small screwdriver to pry it open, and you can remove it. The filter is right behind it; simply pull it out. Remember to check the filter’s direction—align the new filter according to the arrow markings when installing, push it back into place, and then snap the cover panel shut. The whole process takes about ten minutes, saving you a trip to the dealership. It’s good to replace the filter regularly, roughly every 10,000 kilometers, to keep the cabin air fresh.

[BriannaLynn]

As a DIY enthusiast, I've changed the air filter countless times myself. For the Cadillac XTS, the first step is to sit on the passenger side and fully open the glove compartment. Then, feel around inside—there's a removable panel on the lower part of the rear wall. Press the clips with your fingernail or a small tool to remove it. Next, pull out the old filter, and don’t forget to clean the dust from the slot. Align the new filter correctly to avoid installing it backward, press it firmly into place, then reassemble the panel and glove box. I recommend preparing a small toolkit, including a screwdriver and tweezers, to prevent small parts from getting lost. This method saves money and time while helping you familiarize yourself with the car’s interior structure.

[DiLiam]

I just learned to do it myself, and changing the filter is super easy. Sit on the passenger side of the car, open the door and get in, then open the glove compartment in front. Pull the glove compartment all the way down, and you'll see a plastic cover at the back inside. Gently press the clips on the edge of the cover, and it will release. Then pull out the old filter from the gap, replace it with a new one, align it properly, push it back in, and snap the cover back on. The whole process is as simple as opening a package, even a beginner like me can handle it. Remember to turn off the car engine before doing it—safety first. After changing the filter, the air inside the car improves immediately. It's recommended to check it every six months.