How to Remove the Wrench Icon on Lavida?
3 Answers
Here are the methods to remove the wrench icon on Lavida: 1. Use the button on the car dashboard, press and hold the reset button for 5-10 seconds to remove the wrench icon. 2. Access the vehicle computer and remove it from the maintenance settings. Relevant information is as follows: 1. The wrench icon on the car dashboard is a maintenance reminder light. When this light comes on, it indicates that the car needs maintenance. 2. The maintenance reminder light is quite convenient for managing the car's maintenance cycle. Note: After the car maintenance is completed, the maintenance reminder light should be immediately turned off and reset. Otherwise, it may cause memory confusion and disrupt the car's maintenance cycle.
The small wrench icon on the Lavida's dashboard is the maintenance reminder light. I encountered this issue before and was quite puzzled at first, but later managed to solve it myself. The method is very simple: First, turn off the engine and ensure the vehicle is in the OFF state. Then, press and hold the trip reset button on the dashboard without letting go. Next, turn the key to the ACC position (power on without starting the engine) and observe if the small wrench icon flashes or disappears. If the icon disappears after a few seconds, you can release the button. If there's no response, repeat the process a few times. Some newer Lavida models might require slightly different steps, but most can be reset this way. I recommend checking the vehicle's maintenance records after completing this procedure, as the light serves as a reminder for oil changes and other maintenance tasks. Ignoring it for too long can be harmful to the engine. Developing this habit during daily driving can help extend your vehicle's lifespan.
As someone who frequently works on cars, this little wrench is the standard maintenance light for Volkswagen vehicles. Its purpose is to remind you of the need for maintenance every 5,000 kilometers or six months. The steps to reset it are: turn off the ignition, press and hold the dashboard button, turn on the electrical system without starting the engine, and continue holding the button until the light goes out. Don’t panic—if you don’t do it correctly, it won’t damage the car; you can always try a couple more times. If you’re unsure, take it to a shop and let a professional handle it—it’ll be done in under five minutes. Also, pay attention to your car’s condition; the light doesn’t necessarily indicate a major issue, but regular maintenance can improve fuel efficiency, saving you money in the long run. Regularly check fluid levels and tire pressure—prevention is better than cure.
