How to Remove the Wiper Plug?
3 Answers
The method to remove the wiper plug is: 1. Press the square button in the middle of the wiper; 2. Take off the entire wiper blade and pry open the plug. The method to activate the wiper is: simply toggle the wiper switch located on the right side behind the steering wheel. The functions of the wiper are: 1. To wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility; 2. To use the wiper to determine the position of the wheels. Precautions for using the wiper: 1. When driving in congested areas, avoid frequent operation to prevent distraction and potential vehicle collisions; 2. If no washer fluid sprays out, check whether the spray nozzle is blocked or if there is sufficient washer fluid.
Removing the wiper nozzle is quite simple, and I often help my friends with this. Usually, a clogged nozzle refers to the washer jet being blocked by dust and needing to be taken apart for cleaning. First, locate the nozzle position, which is generally under the hood. Use a flathead screwdriver to gently pry open the fixing clip or buckle, then slowly remove the nozzle connecting tube. Avoid pulling too hard during disassembly, as this can easily break the tube. To clean internal blockages, you can use a fine needle or compressed air to blow it clear. After cleaning, reassemble it as it was. Remember to regularly check the purity of the washer fluid and use clean distilled water to avoid impurities causing blockages. Household tools are sufficient for disassembly—safety first, and ensure the engine is off during operation. The whole process takes less than 15 minutes, saving money and hassle while reducing the frequency of car repairs.
I recently repaired the windshield washer nozzle myself and would like to share my experience. The key points in removing the nozzle are locating its position accurately and handling it carefully. Inside the front hood of the vehicle, near the wiper arm, you'll find small black nozzles. Gently push the clip with a screwdriver to release the connector, then remove the nozzle to check if it's clogged with dust. When cleaning, avoid scratching the channels with hard objects—soaking in warm water to soften residue is recommended. When reinstalling, simply align the grooves and press firmly. The disassembly process is straightforward, but prevention is more important: inspect the washer fluid quality monthly, and using high-quality cleaning agents can reduce clogging frequency. Wear gloves for protection during the process, and seek professional help at a repair shop when necessary to ensure driving safety without issues.
