How to Remove the Wiper Blades on a New Sylphy?

How long does it usually take for the subject three application to be processed?

Generally, the review time for appointment scheduling takes 5-10 days. If you are in a first-tier city with a large number of applicants, the processing time may be extended. Some students may find their application status stuck in "processing" when trying to schedule an appointment, making it unclear whether they should attend the exam on the scheduled day. Normally, successful appointments will receive SMS notifications. In such cases, it usually indicates a system error or delay, and you can directly call the local vehicle management office to confirm whether the exam appointment was successfully scheduled. Below is more relevant information: Driving test subject scheduling ranking rules (also applicable to subject three): 1. For first-time subject one exam appointments, the sorting time is based on when the user initially applied for a motor vehicle driver's license. 2. For non-first-time subject one exam appointments, the sorting time is based on the date of the last exam. 3. If a user who successfully scheduled an exam cancels the appointment due to personal reasons, the sorting time is based on the cancellation date. 4. If both scenarios 2 and 3 apply, the most recent time is used as the sorting time.

13

2

Share

What is the legal basis for penalizing vehicles carrying mud on urban roads?

Vehicles carrying mud on urban roads violate the provisions of the "Urban Appearance and Environmental Sanitation Management Regulations," an administrative regulation. Article 15 of the "Urban Appearance and Environmental Sanitation Management Regulations" stipulates: Transportation vehicles operating in urban areas must maintain a good and clean appearance. For liquid or bulk cargo transported by freight vehicles, it must be sealed, wrapped, or covered to avoid leakage or spillage. Below are some precautions for novice drivers on the road: 1. Pay attention to braking techniques: When braking, avoid panic. When anticipating the need to brake, press the brake pedal slowly and continuously to reduce speed evenly. As the vehicle is about to stop, gradually release the brake pedal until the vehicle stabilizes. Sudden braking causes significant wear on the wheels and brake pads, which is harmful to the vehicle. 2. Be mindful of lighting: Avoid using high beams indiscriminately—do not use high beams when following another vehicle, avoid using them in urban areas, and switch to low beams when facing oncoming traffic to prevent accidents. 3. Precautions for novice drivers when navigating curves: When driving through a curve, reduce speed before entering the curve, keep your right foot on the brake pedal to alert vehicles behind, and continue to keep your right foot on the brake pedal while in the curve. Remember to hold the steering wheel steadily. After passing the midpoint of the curve and seeing the straight road ahead, begin to accelerate. Avoid excessive speed when driving through curves, as losing control can easily lead to accidents. 4. Driving slowly is not always better; maintain an appropriate speed: When conditions permit, drive close to the speed limit and match the overall flow of traffic. This ensures both driving efficiency and safety.

10

4

Share

Is the Bora a Global Model?

The Bora is not a global model; it is a China-specific vehicle. Here is the relevant information: 1. Exterior Design: The new Bora's exterior design features black piano lacquer B-pillars, creating a seamless connection between the front and rear seats, enhancing the overall body cohesion and adding a premium feel to the new Bora, providing users with a better visual experience. The new Bora's dynamic front fog lights with cornering function adopt a circular three-dimensional design, embedded below the lower bumper. The chrome-plated circular outer ring perfectly complements the two chrome bright strips on the lower grille, showcasing the vehicle's dazzling brilliance through exquisite details. 2. LED Brake Lights: The LED brake lights illuminate faster, are brighter, and have stronger penetration, effectively increasing driving safety.

1

5

Share

Is a Paper Insurance Policy Still Required for Vehicle Inspection in 2021?

2021 vehicle inspection does not require a paper insurance policy. When owners handle new vehicle registration or annual vehicle inspection, they no longer need to prepare a paper insurance policy. With an electronic insurance policy, they can complete the procedures. Owners will not be penalized for forgetting to carry the compulsory traffic insurance mark while driving. Here is an introduction to the contents of vehicle annual inspection: 1. Passenger transport vehicles: Within 5 years, inspect once a year; over 5 years, inspect once every 6 months; 2. Cargo vehicles and large, medium-sized non-passenger transport vehicles: Within 10 years, inspect once a year; over 10 years, inspect once every 6 months; 3. Small and micro non-passenger transport vehicles: Within 6 years, inspect once every 2 years; over 6 years, inspect once a year; over 15 years, inspect once every 6 months; 4. Motorcycles: Within 4 years, inspect once every 2 years; over 4 years, inspect once a year; 5. Tractors and other motor vehicles: Inspect once a year. Operational motor vehicles that pass the safety technical inspection within the specified inspection period will not need to repeat the safety technical inspection; 6. Vehicles exceeding the scrapping age limit: Cannot be transferred (sold or bought), but can continue to be used. For transactions, one can first apply for the vehicle's scrapping certificate (canceling the vehicle's file) at the vehicle management office, and then proceed with the transaction.

3

5

Share

Does water entering the car floor have any impact?

Introduction to the effects of water entering the car floor: 1. Vehicle rust and corrosion: Water entering the vehicle can corrode the floor and metal components, causing floor damage and metal parts to rust, significantly increasing the probability of vehicle malfunctions and threatening the driver's safety. 2. Vehicle electrical short circuits: If water entering the vehicle is not promptly addressed, accumulated water may cause short circuits in some wiring under the floor. When starting the vehicle, this can easily affect normal operation due to short circuits, and may even burn out the vehicle's computer, leading to malfunctions. 3. Unpleasant odors in the vehicle: If water is not promptly removed and the area dried after entry, residual water can corrode the vehicle floor and cause the floor mats to mold and deteriorate, resulting in unpleasant odors inside the vehicle.

9

2

Share

What Causes the Squeaking Noise When the Car Body is Slightly Twisted?

The causes of squeaking noises when turning the car are as follows: 1. Sound from the turn signal reset: If the turn signal is activated while turning, the noise may come from the rebound clip of the automatic reset mechanism of the turn signal, which is normal. Sometimes there are multiple sounds because the steering wheel has three automatic reset notches per full rotation—turning the wheel one full rotation will produce three clicks. 2. Friction between plastic parts: The steering wheel is usually made of plastic components. In colder temperatures, plastic hardens, which can naturally cause friction noises. 3. Noise from inside the steering wheel: If the noise originates from inside the steering wheel, it is likely due to the clock spring (spiral cable) of the airbag. Applying grease to the clock spring may help, but if the noise persists, the clock spring must be replaced as it is damaged. Caution: Carefully remove the steering wheel or disconnect the airbag fuse to prevent accidental deployment. 4. Aging of the tie rod end ball joint: If the tie rod end ball joint is worn out, it can cause steering wheel vibration and noise. In such cases, the tie rod end ball joint should be replaced, followed by a wheel alignment. 5. Steering gear failure: If the noise during turning is very loud, it may be due to excessive gear clearance in the steering gear, requiring replacement. 6. Noise from the strut mount bearing: Open the hood and listen for noise from the top of the strut mount. If the noise comes from the strut mount bearing, applying grease may help. If the noise persists, the bearing must be replaced. 7. Noise from the stabilizer bar: If the noise is not from the strut, check the stabilizer bar bushings for looseness or damage. Loose or damaged bushings can cause noise not only when turning but also when driving over uneven surfaces. Loose bushings can be fixed with shims, but damaged ones must be replaced.

11

5

Share

How to Remove the Wiper Blades on a New Sylphy?

How long does it usually take for the subject three application to be processed?

What is the legal basis for penalizing vehicles carrying mud on urban roads?

Is the Bora a Global Model?

Is a Paper Insurance Policy Still Required for Vehicle Inspection in 2021?

Does water entering the car floor have any impact?

What Causes the Squeaking Noise When the Car Body is Slightly Twisted?

What Causes the Engine Light to Illuminate and Lack of Acceleration Power?

What is the violation code for occupying the wrong lane?

What are the reasons for the Magotan's failure to start?

How to Restore Dull Car Paint?