How to Remove the Volkswagen Cigarette Lighter?

2 Answers
DelMiguel
07/23/25 7:52pm
Hand-pull the outer ring to remove it. Here are the relevant instructions: 1. Vertical Removal: The power voltage of the car cigarette lighter is 12 volts, with a separate fuse. When using it, try to pull it out vertically, and avoid shaking it left and right, as this may burn out the fuse or even damage electronic devices. 2. Material: The outer layer of the cigarette lighter is made of iron, and the middle heating wire part is the positive pole. Insert the cigarette lighter and press to lock it for heating. After the heating plate is heated, the spring clip will deform and release the cigarette lighter plug, which pops out. At this point, the temperature is sufficient to light a cigarette.
Was this review help?
7
2
Share
StMaddox
08/10/25 5:54pm
Speaking of removing the cigarette lighter in my Volkswagen, I remember being confused the first time too—I grabbed the wires directly and almost broke them. Actually, it's very simple: after parking and turning off the engine, avoid touching the wires. Just pinch the cylindrical metal head or plastic cover of the lighter with your fingers and gently pull outward. It usually comes right out. If it's stuck—which often happened with my old car—don't yank it. Instead, wiggle it slightly left and right while pulling to release the latch. Once, my lighter was stuck so tight that I later discovered it was due to dust buildup. I cleaned the socket with a cotton swab dipped in alcohol, and it worked much smoother afterward. Safety tips: Never remove it while driving, as it can distract you and cause accidents. Ensure your hands are dry before handling to avoid short circuits in case of exposed wires. The cigarette lighter isn’t just for lighting cigarettes—it can also power car chargers. So, regular cleaning of the socket and lighter head improves durability. I recommend maintenance once a year. Avoid using tools to force it out, as this can damage internal circuits and lead to costly repairs.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

What to Bring When Buying a Car?

ID card, driver's license, bank card, and other documents. Below is relevant information: 1. Precautions: When picking up the car, pay attention to the odometer reading: usually within 100 kilometers, check if there are any debris in the radiator fins, if the seat protective packaging and the front plastic cover are intact, and if there are any stains on the interior seats and dashboard. When picking up a pre-ordered vehicle, check if the manufacturing date and pickup date are too far apart. If the gap is too long, the car might be a display model or a refurbished one. 2. Detailed inspection: Observe the car paint from different angles to ensure color consistency and check for scratches. Some vehicles might have suffered scratches during transportation. Inspect the tire tread for scratches, bulges, or heavy friction marks. Tires are crucial for driving safety; problematic tires are prone to blowouts.
13
3
Share

What do traffic intersection cameras capture?

Traffic light intersection cameras are used to capture red-light running violations. Here is relevant information: 1. Pressure sensing: Electronic eyes use induction loops to detect pressure from vehicles on the road surface, transmitting signals via sensors to the central processor which temporarily stores them in registers. 2. Pulse signals: If two pulse signals are generated simultaneously within the same time interval (red light cycle), it is deemed "valid". 3. Preventing false captures: The photo system delays activation by 2 seconds when the yellow light is on; it activates immediately when the red light turns on; and shuts down 2 seconds before the green light appears, primarily to prevent false captures.
20
1
Share

Does a small cut on the tire sidewall require a new tire?

It is better to replace it, otherwise there may be potential hazards. Here is the relevant information: 1. Specification and model representation: Tires are important components of a car, and there are many specifications and models of tires, with different specifications and models suitable for different types of vehicles. The specification and model identification is usually on the side of the tire, represented by a series of alphanumeric characters, corresponding to the tire's tread width, aspect ratio, type, rim size, load index, and speed rating. 2. Speed rating: According to the different maximum speeds they can withstand, tire speed ratings can be divided into different grades from A to Z, with grade A further subdivided into eight different grades from A1 to A8. The further back the letter representing the tire speed rating is, the better the tire performance.
12
0
Share

What does the tire specification 195/60r16 mean?

95 indicates that the tire width is 195MM. 60 represents the aspect ratio of the tire section, which is 60%, meaning the section height is 60% of the width. R stands for radial tire, with the full English term being RADIAL. 16 denotes that the rim diameter is 16 inches. Additional information about tires is as follows: 1. When purchasing tires, it is best to use the original factory-matched size: Unless there are special requirements for handling, the original factory-matched size tires are the best choice when replacing tires. Of course, if you want to enhance the vehicle's handling through tire upgrades, you can consider switching to tires with a lower aspect ratio, which is also one of the effective methods to improve the vehicle's appearance and handling performance. 2. Choosing the right tire tread pattern is crucial: For cars, it is advisable to select tires with longitudinal patterns or a combination of longitudinal and lateral patterns that offer good heat dissipation and strong lateral stability. Off-road vehicles should opt for off-road tread patterns with wide and deep grooves and smaller tread block contact areas.
1
4
Share

What Causes CVT Jerking?

Jerking refers to the impact phenomenon that occurs when the transmission shifts gears. Here is relevant information: 1. Advantages: The benefits of a CVT transmission include its compact size, simple structure, easy maintenance, and smooth operation. It is primarily used in Japanese, Korean, and some domestic vehicles. The CVT transmission allows the engine to stay within an optimal RPM range, making cars equipped with this transmission generally more fuel-efficient. 2. Disadvantages: The drawbacks of a CVT transmission are its low torque capacity and susceptibility to slipping. As a result, CVT transmissions are typically paired only with small-displacement engines. Larger-displacement engines, which produce higher torque, require an AT transmission.
20
5
Share

What do C1 and C2 mean?

C1 and C2 refer to different levels of driver's licenses. Obtaining a C1 driver's license means that individuals with a C1 license can directly drive vehicles designated for C2 without needing to retake the C1 license exam. Relevant information about driver's licenses is as follows: 1. Introduction: The People's Republic of China Motor Vehicle Driver's License, commonly referred to as a driver's license or 'driver's permit,' is a mandatory certification for motor vehicle drivers under the laws of the People's Republic of China. 2. Examination Content: The test subjects include traffic regulations and related knowledge, field driving, and road driving (including safe and civilized driving).
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.