How to Remove the Trunk Compartment Layer?
3 Answers
When the ignition switch is in the OFF position, press and hold the open button on the remote key for more than 2 seconds. However, when the key is inside the vehicle, you need to unlock the car first, then press the open switch on the trunk lid to open it. However, when the key is inside the vehicle, you need to unlock the car first, then press the open switch on the trunk lid to open it.
Whenever I need more trunk space, such as for transporting large luggage, I have to remove the trunk compartment layer from the car. It's usually a hardboard or soft pad covering the spare tire, designed with simple snap mechanisms for securing it. My steps are to first open the trunk and look for a small pull tab or button at one corner of the compartment layer—many cars have built-in release mechanisms. A gentle pull or press loosens the snaps, and then I slowly lift the entire layer from the side, avoiding any forceful tugging to prevent tearing the edge material. If there's no obvious marker, I carefully inspect the attachment points, as it might be secured in tracks or hooks, and gently maneuver it out. The whole process should be done patiently to avoid scratching the interior with nails. Once removed, place it on a flat surface and avoid stacking heavy items on top to prevent deformation. A quick reminder: some car models have foldable compartment layers, so check the manual or online videos before removal—safety first, and never attempt this while driving. After removal, ensure no wires or pipes are tangled around, and regularly clean the dust off the back of the compartment layer during trunk maintenance to prolong its lifespan.
When I bought my first car, I found the trunk partition board quite obstructive. I didn't know how to handle it when I needed to load large items, but after some research, I finally figured it out. Here's roughly how to do it: locate the fixing points of the partition, usually plastic clips or hooks in the corners, gently push or pry them open, then slowly lift the entire board upwards. Be careful not to use excessive force, as this can easily damage the car's interior or the fasteners. If it feels stuck, try pushing or pulling it sideways to see if it's caught on a sliding rail. Before operating, it's best to clear out any clutter from the trunk and wear anti-slip gloves to prevent your hands from slipping. It's recommended to have a friend help stabilize the partition, as it's safer and more efficient to remove it with two people. After removal, store it in a shady place to avoid sun damage and aging. The process is simple but requires care, as damaging it would mean spending unnecessary money on repairs. Newcomers will get the hang of it after a few tries.
