How to Remove the Taillight Cover of a Corolla?
2 Answers
Method for removing the taillight cover of a Corolla: The taillight cover cannot be removed separately and must be taken off along with the entire taillight assembly. First, remove the decorative panels at both ends of the rear trunk. Then, you will see the taillight assembly. Unscrew the bolts, push the assembly outward with one hand while supporting it from the outside with the other hand to remove the taillight assembly. Taillights are used to alert vehicles behind during nighttime driving, indicating the presence of a vehicle ahead and showing the positional relationship between the two vehicles. They are installed on both sides of the rear of the car. The Corolla, once translated as "Corolla," is a brand under Toyota. It is equipped with Michelin 215/45R17 tires, TRD Sportivo high-performance shock absorbers, TRD TF4 17-inch sport rims, reinforced clutch, and high-performance brake pads, ensuring relatively ideal sports performance.
Last time I removed the taillight cover on my Corolla, it felt pretty straightforward, but patience is key. First, gather your tools—I recommend a Phillips screwdriver and a pry bar. If you don’t have a pry bar, a flathead screwdriver will work, but be careful not to scratch the paint. The taillight is located on the inner side of the trunk lid. Open the trunk, and you’ll find several screws securing the cover. Unscrew them counterclockwise with the screwdriver and set them aside. Then, gently pry open the edges of the cover—it’s held by clips, so avoid using excessive force, or you might break them. Once removed, you can replace the bulb or clean the interior. Remember to wear gloves to prevent static electricity. When reinstalling, align the cover properly and push it back until you hear a click. I noticed that the clips on older Corolla models are more fragile, so handle them with extra care. The whole process took me about 20 minutes. DIY saves money and adds a fun hands-on experience—just check your vehicle manual or model specifics beforehand to avoid surprises.
