How to Remove the Tachometer on a Geely Emgrand?

How to Use Tire Repair Sealant?

Usage method of tire repair sealant: 1. Remove puncturing objects from the tire; 2. Position the valve at the 4 o'clock or 8 o'clock position and remove the valve core; 3. Take off the cap of the sealant bottle, insert the bottle nozzle into the tire valve, and squeeze the bottle to inject the sealant into the tire; 4. Reinstall the valve core and inflate the tire to the specified pressure; 5. Drive slowly for about 10 kilometers to evenly distribute the sealant on the inner wall of the tire; 6. For safety, drive to a safe area and check the tire pressure, inflate to normal pressure if insufficient; 7. If nails are found during subsequent driving, pull them out, but some air may escape—quickly rotate the tire to allow the sealant inside to seal the hole.

1

4

Share

Which Vehicles Require Automotive Urea?

Vehicles that use urea include: heavy-duty trucks and buses. Automotive urea refers to diesel exhaust fluid, primarily a liquid used in SCR (Selective Catalytic Reduction) technology to reduce nitrogen oxide pollution in diesel vehicle emissions. To meet annual exhaust emission standards, diesel vehicles are required to install an SCR system in their exhaust treatment. The automotive urea solution is used in the SCR system to treat nitrogen oxides in the exhaust. Automotive urea is a colorless, transparent liquid stored in a urea tank. When sensors detect nitrogen oxides in the exhaust pipe, they automatically spray a mist of automotive urea, which mixes with the nitrogen oxides and undergoes a redox reaction in the SCR catalytic converter, ultimately producing harmless nitrogen and water that are expelled.

14

5

Share

How Long Can a Car Water Pump Last?

Under normal usage conditions, a car water pump can last up to 10 years, and generally, it's normal for it to function for over 8 years. The working principle of a car water pump is that the engine drives the water pump bearing and impeller through the pulley. The coolant in the water pump is rotated along with the impeller and, under centrifugal force, is thrown towards the edge of the water pump housing, generating a certain pressure before flowing out through the outlet or hose. The center of the impeller experiences reduced pressure as the coolant is thrown outward, and the coolant in the radiator is drawn into the impeller through the hose due to the pressure difference between the pump inlet and the impeller center, achieving a reciprocating cycle of the coolant.

14

4

Share

What is the principle of run-flat tires for cars?

Car run-flat tires principle: Run-flat tires utilize stiffer sidewalls composed of a specially formulated rubber compound that supports the vehicle's weight even when under-inflated or at zero pressure. This design not only ensures the tire remains securely seated on the rim bead seat during zero-pressure conditions but also maintains ease of tire installation. The correct term for car run-flat tires is "tire pressure monitoring system (TPMS) tires," which can continue to drive up to 250 kilometers at a speed of 80 km/h even after being punctured. This allows car owners to save the cost of carrying a spare tire and enables them to calmly drive to a repair shop after a flat. Additionally, run-flat tires significantly enhance driving safety.

15

0

Share

What Causes a Car to Click but Not Start?

When a car clicks but does not start, the reason is usually insufficient battery charge. A depleted battery prevents the vehicle from starting. Battery depletion can occur due to the battery's own quality and lifespan issues, but most commonly, it happens because the car has been parked for an extended period without the battery being recharged or due to the use of high-power electrical devices after the engine is turned off, such as the air conditioning, audio system, or headlights. The battery is an essential part of a car and can be categorized into traditional lead-acid batteries and maintenance-free batteries. Maintenance-free batteries use lead-calcium alloy grids, which produce less water decomposition during charging and have lower water evaporation rates. Additionally, their sealed structure minimizes the release of sulfuric acid gas. Compared to traditional batteries, they offer advantages such as requiring no liquid refills, having better terminal connections, and longer charge retention.

12

5

Share

What is the standard value for tire pressure monitoring?

The standard value for tire pressure monitoring is between 2.3bar and 2.5bar. When the car is fully loaded (5 people), it is appropriate to adjust the tire pressure to around 2.5bar. For two people, a tire pressure of 2.3bar is normal. The standard pressure can usually be found in the vehicle's user manual, on the label near the driver's door (near the B-pillar), in the drawer next to the driver's seat, or on the fuel tank cap. When the tire pressure is below 75% of the standard value or drops by 30% of the standard value, the tire pressure monitoring system should issue an alarm. Driving is safe when the tire pressure is between 25% and 30% below the standard value listed on the vehicle's nameplate.

4

0

Share

How to Remove the Tachometer on a Geely Emgrand?

How to Use Tire Repair Sealant?

Which Vehicles Require Automotive Urea?

How Long Can a Car Water Pump Last?

What is the principle of run-flat tires for cars?

What Causes a Car to Click but Not Start?

What is the standard value for tire pressure monitoring?

How many points are deducted for stalling during hill start in Subject 2?

What is the method for removing the steering wheel of a Volkswagen Magotan?

Can car owners replace the coolant themselves?

Do You Need to Replace Brake Discs When Changing Brake Pads?