How to Remove the Steering Wheel of a Fit?
2 Answers
Honda Fit steering wheel cover removal steps: 1. Unscrew the steering wheel bolts and detach the airbag. 2. Unplug the black horn connector. 3. For the airbag wiring, grasp the white protrusions on both sides and wiggle left and right. Precautions for Honda Fit steering wheel cover removal: 1. Do not tamper with the internal airbag to avoid affecting its normal functionality. 2. Simply removing the airbag cover does not impact airbag operation. The airbag deployment is triggered by external vehicle sensors detecting a severe impact, which sends a signal to the computer. The computer then ignites the airbag, causing the internal gas to explode and generate high-pressure gas for instant deployment.
As someone who frequently works on cars myself, I remember the last time I helped a friend remove the steering wheel from their Fit, the process was quite involved. The first step was disconnecting the negative battery terminal and waiting a few minutes for the system to discharge—this is crucial to prevent accidental airbag deployment, which would be disastrous. Then, using a flathead screwdriver, I pried open the center cover of the steering wheel, revealing the airbag mounting screws underneath. I switched to a Torx wrench to carefully unscrew these bolts. Next, I gently lifted the airbag module and disconnected the yellow electrical connector on the back—remember to be gentle and avoid pulling too hard. Finally, there was the main steering wheel bolt, located behind the wheel; once loosened, the steering wheel could be removed. The whole process requires patience, and don’t forget to wear gloves for protection. While working, I usually take the opportunity to inspect the steering column for wear and lubricate the joints to prevent looseness and noise. The Fit’s steering system is quite durable, and handling it yourself not only saves on repair costs but also helps you learn new skills.
