How to Remove the Steering Wheel of a Cavalier?
2 Answers
The method for removing the steering wheel of a Cavalier: There are two clips behind the steering wheel. By prying the clips from top to bottom through the two rear holes, the central airbag can be removed. After removing the airbag, unscrew the central screw of the steering wheel to detach it. Reinstallation should follow the reverse order. The Cavalier's body dimensions are 4474 mm in length, 1730 mm in width, and 1471 mm in height, with a wheelbase of 2600 mm. The Cavalier features front-wheel drive, a front suspension type of MacPherson independent suspension, a rear suspension type of torsion beam non-independent suspension, and a unibody structure.
I just tried disassembling the Cavalier steering wheel and must emphasize safety first, as the airbag system can easily deploy accidentally. The steps are roughly as follows: First, disconnect the negative terminal of the vehicle battery and wait at least 30 minutes for the system to power down to prevent airbag deployment. Then, use a screwdriver to remove the center cover of the steering wheel, usually secured by two or three screws. Before removing the airbag module, handle the wiring connectors carefully—avoid pulling forcefully. Next, use a socket wrench to turn the large central nut counterclockwise, which may require some effort. Once the nut is loosened, slowly pull out the steering wheel without rushing to avoid damaging the steering column. It's recommended to operate on a dry surface, wear gloves to prevent static electricity, and use plastic-headed tools to avoid short circuits. After completion, remember to test the functions before reconnecting everything. If you're not familiar with the process, seek help from a professional shop—safety is not an area to cut corners.
