···
Log in / Register

How to Remove the Spare Tire of the Excelle?

6Answers
Annie
07/29/2025, 04:09:14 AM

The method to remove the spare tire of the Excelle is to use a wrench to loosen the fixing screws. The purpose of the spare tire is to prevent the car from breaking down due to tire damage. Precautions for replacing the spare tire include: 1. Turn off the engine, pull up the handbrake, and engage the gear to prevent the vehicle from rolling; 2. Place a triangular warning sign and turn on the hazard lights; 3. Tighten the bolts diagonally when replacing the spare tire; 4. Adjust the air pressure of the spare tire with a pressure gauge before replacement; 5. Replace the valve stem at the same time. The Excelle has a body length, width, and height of 4609mm, 1798mm, and 1486mm respectively, with a wheelbase of 2640mm. It is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125PS, a maximum power of 92kW, and a maximum torque of 170Nm, paired with a 6-speed manual transmission.

Was this review help?
109
Share
Holly
08/13/2025, 12:01:40 AM

I remember the last time I retrieved the spare tire for my Buick Excelle. First, I cleared out all the clutter in the trunk and lifted the floor mat to reveal the round cover. Using a key or a flathead screwdriver to pry open the cover, there was a large nut securing the spare tire inside. I inserted the jack lever from the car into the nut's groove and turned it counterclockwise two turns to loosen it, then simply pulled the spare tire out by hand. By the way, I’d remind you to check the spare tire’s pressure—once I was in a hurry to use it only to find it was completely flat, and I ended up having to call for roadside assistance. The spare tire for this car is smaller than the original tire, so don’t drive too fast with it.

Was this review help?
13
Share
Expand All
DelBrielle
10/05/2025, 12:37:19 AM

A few days ago, I paid special attention to the steps when helping my neighbor's aunt retrieve the spare tire. First, I firmly engaged the handbrake to ensure safety, then knelt by the trunk to clear out items and carefully lifted the dust cover. The large knob securing the spare tire required the L-shaped wrench from the vehicle's tool kit—loosening it counterclockwise three to four turns was enough to remove it. Remember to bend your knees when lifting to avoid straining your back by using straight posture. Also, if the trunk light is too dim, using a phone flashlight can help during the process. The whole procedure actually takes about five minutes and is simpler than imagined.

Was this review help?
10
Share
Expand All
VanSawyer
11/18/2025, 01:08:55 AM

The key to accessing the spare tire lies in tool placement. First, locate the foam tool compartment on the right side of your trunk, which contains a metal rod with a hook. Insert it into the center hole of the spare tire cover and turn counterclockwise halfway until you hear a click—the cover will pop open. After loosening the securing bolt by hand, it's best to use a wrench for final tightening. I've noticed that the Buick Excelle's spare tire is lighter than standard sedan ones, making it easy even for women to lift. Remember to take a photo documenting the tool arrangement before removal to avoid confusion during reinstallation.

Was this review help?
3
Share
Expand All
DelJulia
01/08/2026, 02:45:41 AM

Over the years of running a repair shop, I've seen many cases of mishaps when retrieving spare tires. There are three key points: Don't overlook the specialized wrench hidden in the foam layer when looking for tools – you can't loosen the bolts by hand; When lifting the spare tire, keep it close to your body for support, as holding it 15 cm above the ground makes it easy to drop on your feet; Always check the production date immediately after removal – rubber deteriorates after six years. Last time, a customer didn't check the date and had a spare tire blowout on the highway. I recommend lifting the trunk mat quarterly for ventilation to prevent the fasteners from rusting shut.

Was this review help?
1
Share
Expand All
EmeryFitz
04/05/2026, 01:17:21 AM

I learned how to retrieve the spare tire when I had a flat on my last camping trip. First, press the button on the left side of the trunk to fold down the rear seats, creating working space. Lift the felt to expose the metal floor panel, then use an adjustable wrench to turn the central cross bolt counterclockwise—if it's stuck, gently kick the wrench for extra leverage. Don't place the spare tire on the ground to roll it, as gravel can damage the tread. Remember, the full tool kit includes a jack, warning triangle, and reflective vest—wear the vest before starting for safety. This skill should be taught in driving lessons; it can be lifesaving in critical moments.

Was this review help?
6
Share
Expand All
More Q&A

Does the new Jetta have a rear anti-collision steel beam?

The new Jetta does not have a rear anti-collision steel beam. The function of the rear bumper is to absorb the impact force. For minor collisions, it is to sacrifice the rear bumper to ensure the integrity of the vehicle chassis. Without the rear anti-collision steel beam, there is a lack of protection against minor collisions, which can lead to greater damage to the body, as the rear car can directly hit the rear of the axle through the plastic bumper. The dimensions of the new Jetta are 4487mm in length, 1706mm in width, and 1470mm in height, with a wheelbase of 2603mm. The new Jetta is equipped with 1.4L and 1.6L engines, with maximum power outputs of 90 horsepower and 110 horsepower respectively. The transmission is matched with a 5MT or 6AT gearbox.
110
Share

What Causes Misfire in the Third Cylinder of an Engine?

Misfire in the third cylinder of an engine is caused by damaged spark plugs or broken cylinder wires, and it can be resolved by replacement. Below are specific details about three-cylinder engines: 1. Composition: A three-cylinder engine consists of three cylinders. Inside, three identical single cylinders are arranged on one engine block sharing a single crankshaft to output power. Its primary function is to convert chemical energy into mechanical energy. 2. Principle: The basic principle of a three-cylinder engine involves converting the chemical energy of gasoline (or diesel) into thermal energy. The combustion and expansion of the sealed gas mixture inside the cylinder drive the piston to perform work, thereby transforming thermal energy back into mechanical energy.
111
Share

What are the requirements for children riding in the front passenger seat?

The requirements for children riding in the front passenger seat are as follows: 1. Age limit: Only children aged 12 or above or taller than 1.4 meters can sit in the front passenger seat. 2. Holding children: Parents holding infants are not allowed to sit in the front passenger seat, nor can child safety seats be installed there. 3. Seat belts: If front passengers fail to fasten seat belts while driving on highways or urban expressways, they may face fines through electronic monitoring or on-site enforcement, with corrective action required. 4. Penalties: On roads with speed limits below 50 km/h (excluding highways and urban expressways), unbelted front passengers will receive verbal warnings and education for correction without penalty points or fines.
110
Share

What Causes a Car Engine to Fail?

Reasons for car engine failure: 1. Irregular maintenance; 2. Deteriorated engine oil and clogged oil filter; 3. Clogged air filter; 4. Dirty intake pipes; 5. Excessive sludge in the crankcase; 6. Poor maintenance of the fuel system; 7. Rust and scale in the radiator; 8. Poor condition of the cooling system: Common engine failures such as piston scuffing, knocking, cylinder leakage, severe noise, and reduced acceleration power are all caused by abnormal engine operating temperature, excessive pressure, and poor cooling system conditions. The engine is the most critical part of a car. It is essential to perform regular maintenance on the engine, change the oil promptly, and check the air filter and cooling system for any issues. If problems are found, they should be addressed as soon as possible to prevent accidents during the next use.
120
Share

What is the wheelbase of the Volkswagen Lavida?

The wheelbase of the Volkswagen Lavida is 2688 mm, with length, width, and height measuring 4605 mm, 1765 mm, and 1460 mm respectively, making it a compact sedan. The Lavida's in-car navigation system combines a touch screen with knob controls and includes MP3 playback capability, along with USB, AUX, and SD card expansion slots, offering user-friendly and powerful functionality. The LCD screen features a foldable design. The Lavida's headlights are designed simply with separate low and high beams, though it's slightly disappointing that even the high-end models do not come equipped with projector lenses or xenon headlights. The Volkswagen Lavida uses diamond-shaped fog lights with chrome-plated decorative elements, but the base models do not include fog light configurations.
103
Share

How to Fix Hill Start Assist Malfunction in Focus?

Hill Start Assist has specific activation conditions. When a malfunction occurs, first check whether the vehicle and road conditions meet the following requirements: with the handbrake not engaged, the gear lever of manual transmission models should be in neutral position, while for automatic transmission models, the gear lever should be in non-P position, and the vehicle must be stationary. If the conditions are met but the Hill Start Assist still malfunctions, drive to a 4S shop or repair shop for inspection. Below are detailed explanations about Hill Start Assist: Function: The Hill Start Assist Control temporarily applies braking force to all four wheels to prevent the vehicle from rolling backward. Without Hill Start Assist Control, the driver must quickly and accurately switch from the brake pedal to the accelerator pedal. However, with Hill Start Assist Control, since it prevents the vehicle from rolling backward, the driver can start the vehicle easily and operate the pedals with ease.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.