How to Remove the Spare Tire of BYD Song?

Must the Tire Production Date Face Outwards?

Tire production date must face outwards. If the tire is mounted incorrectly, the vehicle's comfort will be affected. For symmetric tread pattern tires, there is no distinction between inside and outside during installation, but the side with the production date should be placed on the outside. For unidirectional tread pattern tires, they should be installed according to the direction of the arrow, which indicates the rolling direction of the wheel. Car tires are one of the essential components of a vehicle, directly in contact with the road surface. Together with the car suspension, they help absorb shocks during driving, ensuring good ride comfort and smooth operation. They also maintain excellent traction between the wheel and the road, thereby improving the vehicle's traction, braking, and off-road capability. Basic knowledge of tire maintenance and usage is as follows: Tire Maintenance: Check the tire pressure every 15 days, including the spare tire. Regularly perform wheel balancing to prevent the vehicle from pulling to one side. Inspect the tires for excessive wear once a month. If any foreign substances are found on the tires, clean them promptly. Usage Tips: Overinflating tires can cause the tread to bulge, leading to excessive wear in the central area over time. Therefore, always refer to the standard tire pressure specified in the vehicle's manual when inflating. Conversely, driving with underinflated tires for extended periods can result in excessive wear near the inner and outer tire shoulders.

18

0

Share

Is there an examiner in the car for Subject 2?

There is no examiner in the car during the Subject 2 test. Below is an extended introduction: Subject 2: The C1/C2 car test includes five mandatory items—reverse parking, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving (some areas also have a sixth item, high-speed toll card collection). Score confirmation: The Subject 2 test is taken once, and if failed, a retake is allowed. If the retake is not taken or is still failed, the test ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests must not exceed five. If the fifth scheduled test is still failed, the results of other previously passed subjects will be invalidated.

3

Share

Can the insurance still be used after the relocation and registration of a vehicle?

Can the insurance still be used after the relocation and registration of a vehicle? Introduction to vehicle relocation: Vehicle relocation refers to the process of moving a vehicle from one location to another and making corresponding changes to the vehicle's records and license plates. Specifically, it involves transferring the vehicle's ownership from one city to another and updating the relevant vehicle documentation and license plates accordingly. It's important to note that each city has different acceptance criteria for relocated vehicles, so compliance with the destination city's policy standards is essential during the relocation process. Introduction to vehicle insurance: Vehicle insurance, also known as motor vehicle insurance or auto insurance, is a type of commercial insurance that provides compensation for personal injuries, deaths, or property damage caused by natural disasters or accidents involving motor vehicles. As a form of property insurance, auto insurance is relatively new in the field of property insurance, having emerged and developed alongside the advent and popularization of automobiles. Unlike modern motor vehicle insurance, early auto insurance primarily focused on third-party liability coverage and gradually expanded to include risks such as collision damage to the vehicle body.

4

Share

Where is the rear windshield washer nozzle located?

The rear windshield washer nozzle is located under the hood of the car, inside the engine compartment near the bottom of the front windshield. Open the driver's door of the car: Pull the hood release lever located on the left side of the driver's leg area. Lift up the car's engine hood. Use the support rod to secure the engine hood, ensuring it is firmly supported to avoid any hazards during operation. The windshield washer nozzle is located under the hood, inside the engine compartment near the bottom of the front windshield. The working principle of the windshield wiper is as follows: The motor on the electric windshield wiper drives the output shaft through the worm gear on the armature shaft and drives the output gear through the idler and idler shaft. The output arm connected to the wiper linkage is then operated by the output shaft. When the motor rotates, the output arm and linkage are driven to move back and forth. The resistor on the control switch is connected to the motor's armature winding to control the motor's speed. The driver can toggle the switch as needed to allow current to flow into the motor's input circuit.

20

0

Share

What does high and low speed mean for motorcycles?

Motorcycle high and low speed refers to high and low gears, where the high gear is the normal driving gear, and the low gear is for very slow speeds. Motorcycle gear types: There are mainly two types: sequential shifting and non-sequential shifting (international shifting). Sequential shifting cycles through 0－1－2－3－4－5－0, while international shifting follows 1－0－2－3－4－5 without cycling, with neutral gear located between 1st and 2nd gear. For motorcycles with a clutch, after starting the engine, engage first gear, slowly release the clutch lever, and gently apply throttle simultaneously. Motorcycle speed measurement method: It primarily relies on a component called the "speedometer drive gear," located at the front wheel axle. The teeth of this gear drive the speedometer cable to rotate, transmitting power to the instrument panel. The gears inside the instrument panel, after speed conversion, finally drive the speedometer needle to indicate the corresponding speed. Each motorcycle model is designed with different speedometer gear sets based on its front wheel size.

2

3

Share

What grade of fuel should a Harley 883 use?

Harley 883 uses 93 octane fuel. Reasons for using 93 octane fuel: 97 octane gasoline refers to a fuel with anti-knock performance equivalent to a mixture of 97% isooctane and 3% n-heptane. The higher the octane number, the better the anti-knock performance. Different grades of gasoline should be selected based on the engine's compression ratio, which is specified in each vehicle's manual. Mid-range cars with a compression ratio between 8.5 and 9.5 generally should use 90 octane (China IV) gasoline, while cars with a compression ratio greater than 9.5 should use 93 octane (China IV) gasoline. Additional notes: If a high-compression engine uses low-octane fuel, it can cause a sharp rise in cylinder temperature, incomplete combustion of the fuel, severe engine vibration, leading to reduced power output, damage to engine components, increased fuel consumption, and poor driving performance. Conversely, if a low-compression engine uses high-octane fuel, it can result in "delayed ignition," where the fuel does not reach its auto-ignition point even at maximum compression, leading to incomplete combustion, which is also not beneficial for the engine.

19

1

Share

How to Remove the Spare Tire of BYD Song?

Must the Tire Production Date Face Outwards?

Is there an examiner in the car for Subject 2?

Can the insurance still be used after the relocation and registration of a vehicle?

Where is the rear windshield washer nozzle located?

What does high and low speed mean for motorcycles?

What grade of fuel should a Harley 883 use?

Will Running Over a Stone Cause Abnormal Noise and Affect the Tire?

Can Changing Oil Solve the Problem of Static Water Ingress in the Transmission?

Can engine replacement be registered without a certificate?

Is the Teana Transmission Really That Fragile?