How to Remove the Spare Tire of a Corolla?

1 Answers
Reyes
07/29/25 6:28pm
Corolla spare tire removal method: Loosen all the tire nuts, position the jack at the corresponding point on the car, after the tire is off the ground, tap around the tire with a hammer to loosen it, then pull the tire off the bolts. If tools are not complete, it is best to go to a 4S shop and have professionals remove it. The Toyota Corolla's body dimensions are 4635mm in length, 1780mm in width, and 1455mm in height. Additionally, the 1.2T Sport version's body dimensions are 4635mm in length, 1780mm in width, and 1435mm in height. The Corolla is equipped with an inline four-cylinder 1.8L engine featuring dual VVTi technology, paired with either a 6-speed manual transmission or a 4-speed automatic transmission, delivering a maximum power output of 100 kilowatts.
Was this review help?
15
4
Share
More Forum Discussions

What are the differences between the 2019 and 2020 Haval models?

Differences between the 2019 and 2020 Haval models: Taking the Haval H6 model as an example, the main difference lies in the complete replacement of the engine with the new China VI-compliant engine. The specific details are as follows: 1. 1.5T engine: The 2019 model has a maximum power of 110KW, maximum horsepower of 150, and maximum torque of 210NM; the 2020 model has a maximum power of 124KW, maximum horsepower of 169, and maximum torque of 285NM. 2. Fuel supply: The 2019 model uses multi-point electronic injection, while the 2020 model uses direct injection. 3. 2.0 engine: The 2019 model has a maximum power of 145KW, maximum horsepower of 197, and maximum torque of 345NM; the 2020 model has a maximum power of 165KW, maximum horsepower of 224, and maximum torque of 385NM.
12
3
Share

Are the Trax and Trailblazer in the same vehicle class?

The Trax and Trailblazer are not in the same vehicle class. Below are the differences between these two models: 1. Body dimensions: The Trax is slightly smaller than the Trailblazer, featuring a more compact body. The Trax measures 4270*1791*1602mm in length, width, and height with a wheelbase of 2570mm, while the Trailblazer measures 4411*1803*1633mm with a wheelbase of 2640mm. 2. Engine specifications: They are equipped with 1.0T and 1.3T turbocharged engines respectively. The 1.0T engine delivers a maximum power of 92kw and peak torque of 180Nm, whereas the 1.3T engine produces a maximum power of 121kw and peak torque of 240Nm.
19
1
Share

What is a VC-Turbo Engine?

vcturbo engine is a variable compression ratio turbocharged engine. The following are the characteristics of a variable compression ratio turbocharged engine: 1. Advantages: The high-pressure direct injection technology is industry-leading. Conventional engines typically allow fuel to be injected up to twice, but this engine can achieve up to five fuel injections within a single stroke, making it the highest injection frequency among mass-produced engines worldwide. The scavenging function is precise and efficient, with full-operation closed-loop control of fuel injection, improving low-end torque by over 20%, and reducing the maximum torque speed to 1450 rpm. 2. Disadvantages: When the engine operates in the high RPM range, the vehicle's infotainment system responds slowly, the air conditioning control panel lacks full functionality, tire noise is very loud at high speeds, and the hybrid engine noise contributes to a poor driving environment. Additionally, during acceleration, the transmission downshifts slowly with significant lag.
15
1
Share

What is the speed limit on the Rongwei Expressway?

The maximum speed shall not exceed 120 kilometers per hour, and the minimum speed shall not be less than 60 kilometers per hour. Expressway speed limit values: The speed limit on expressways shall not exceed 120km/h, and the limit value should be an integer multiple of 10km/h. The difference in speed limits between two adjacent sections should not exceed 20km/h. For highway interchanges, the speed limit signs on the mainline, deceleration lanes, and exit ramps should not differ by more than 30km/h. Speed limit sign design: Speed limit signs should be designed to be more concise, clear, and aesthetically pleasing. They should be placed at the starting point of the speed-limited section and must not be obscured by roadside trees, structures, or other traffic signs. Additional signs should be installed as needed.
19
3
Share

What's the Reason for Mercedes-Benz Protection System Failure Preventing Ignition?

Here are the possible reasons for Mercedes-Benz protection system failure preventing ignition: 1. First, it could be an electrical or electronic fault: Electrical faults include: blown fuse, open circuit in high-voltage coil, open circuit in low-voltage circuit, detached central ignition wire, distributor rotor leakage, or damaged spark plug. Electronic faults mainly refer to the central computer control board losing functionality. 2. Next, it could be a fuel system fault: Fuel system faults causing engine shutdown often exhibit symptoms like weak engine power and the accelerator pedal feeling like stepping on cotton. Possible locations for fuel system faults include: fuel pump failure, blocked fuel line, clogged fuel filter, carburetor malfunction, or damaged injector. Sometimes, the fuel tank might be empty without the owner realizing it. 3. Finally, it could also be a mechanical fault: Common mechanical faults include: timing belt (chain) breakage, cylinder leakage causing loss of pressure, etc.
4
0
Share

Where is the diagnostic port located on the C4L?

The OBD port of the Citroën C4L is located in front of the gear shift lever, near the USB port and cigarette lighter. You can find the OBD port by prying open the cover with your finger in the small hole. Below is some relevant information about OBD: 1. Introduction: OBD stands for On-Board Diagnostic, which is an in-vehicle automatic diagnostic system. This port can be connected to a diagnostic computer to read the car's fault codes, making it an important interface in the vehicle. 2. Function: The on-board diagnostic system continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. If it detects any situation that might cause excessive emissions, it will immediately issue a warning. The OBD system stores fault information in memory, and this information can be read in the form of fault codes through standard diagnostic tools and interfaces. Based on the fault code prompts, maintenance personnel can quickly and accurately determine the nature and location of the fault.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.