How to remove the spare tire mounted underneath the Haval H9?

1 Answers
CooperLynn
07/30/25 1:05am
Open the spare tire buckle and insert the mechanical key into the keyhole in the center of the spare tire to remove the Haval H9 spare tire. Below are precautions for using the spare tire: 1. Regularly inspect the spare tire. The inspection mainly includes checking tire pressure and for any wear or cracks. Replace the tire as soon as possible once the tread wear reaches the wear indicator line. If there are fine cracks on the tire sidewall, avoid long-distance or high-speed driving, as high-speed driving can easily cause a blowout. 2. Do not store oil products with the spare tire. The main component of tires is rubber. If oil products such as lubricants are stored in the trunk and come into contact with the tire, they can cause swelling and corrosion, significantly reducing the tire's lifespan. If the tire gets stained with oil, promptly wash it off with a neutral detergent. 3. The lifespan of a spare tire is about 4 years. Since tires are rubber products, prolonged storage can lead to aging. Generally, the aging period for tires is about 4 years, so the spare tire should be replaced after 4 years.
Was this review help?
15
5
Share
More Forum Discussions

What is equipment-related violation?

Equipment-related violation primarily refers to violations where production-related equipment and facilities fail to meet regulatory requirements. Below is more information about equipment-related violations: 1. Definition of equipment-related violation: It refers to any condition where the work environment, equipment, facilities, and tools do not comply with the "Electric Power Safety Work Regulations" and other relevant technical regulations, as well as various provisions and technical measures for ensuring personal safety, thereby failing to guarantee the safety of personnel and equipment. 2. Responsible parties for equipment-related violations: These are managers, supervisors, or direct leaders of the equipment (or facilities). Those responsible for accidents caused by equipment-related violations will be held accountable.
10
2
Share

What's the Difference Between Showroom Cars and New Cars at 4S Stores?

There is not much difference in appearance between showroom cars and new cars. However, for display purposes, the protective packaging on the car body is usually removed, and waxing may be applied to certain parts of the vehicle. There are three key points to note when inspecting a new car: 1. Check the paint surface: Pay special attention to the uniformity and smoothness of the seams. It's best to compare with another car of the same model. The gaps between doors, bumpers, and the engine hood should be consistent. If the gaps are too large or differ in width from other cars, choose carefully; 2. Check the tires: The tires of a new car should have no damage on the sidewalls. The front tires should have no puncture marks on the tread or sidewalls. Ideally, the tire hairs should still be present on both front and rear tires, with at least the rear tire hairs visible. If there are no tire hair marks on either front or rear tires but the odometer shows only a few kilometers, this is abnormal; 3. Check the nameplate: Each car's nameplate corresponds to a unique engine number and chassis number. Verify these numbers against the certification codes to ensure they match. Also, check the manufacturing date on the nameplate. The gap between the delivery date and the manufacturing date should not exceed three months.
20
4
Share

How to Connect Jumper Cables for a Car?

When connecting jumper cables for a car, first confirm whether it is 12V and ensure the negative terminal is grounded before proceeding with the connection. Below is relevant information: 1. Positive first, then negative: Always follow the sequence of "positive first, then negative" because once the negative is connected, it forms a circuit for the car. If the positive is connected last, when tightening the screw, a conductive wrench accidentally touching the car's metal would be equivalent to connecting the battery's positive and negative terminals together. This not only causes a short circuit in the car battery but may also lead to "sparking" in severe cases. 2. Battery: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Car batteries are categorized into conventional batteries, dry-charge batteries, and maintenance-free batteries. Typically, the term "battery" refers to a lead-acid battery. The normal lifespan of a car battery ranges from 1 to 8 years, largely depending on the vehicle's usage conditions.
1
5
Share

What are the causes and solutions for motorcycle starter slippage?

Motorcycle starter slippage causes and solutions are as follows: 1. Electromagnetic switch failure: Common faults in electromagnetic switches generally include short circuits, open circuits, grounding in the pull-in and hold-in coils, as well as burnt contact discs and points. Whether the coils are open or grounded can be checked by measuring resistance with an ohmmeter. When the starter operates, under the influence of magnetic force, only the armature core rotates while the shaft remains stationary, failing to transmit torque to the engine, resulting in starter slippage. 2. One-way clutch slippage: The main component of the transmission mechanism is the one-way clutch, which transmits torque in one direction only—from the starter to the engine flywheel—to prevent the flywheel from driving the starter motor at overspeed after the engine starts, which could cause damage.
19
2
Share

What are the technical highlights of Mercedes-Benz's four-cylinder engine?

Mercedes-Benz's four-cylinder engine technical highlights lie in its small valve lift and the two aspects of intake camshaft valve lift. Below are the detailed contents regarding the technical highlights of Mercedes-Benz's four-cylinder engine: 1. Small valve lift: The Mercedes-Benz four-cylinder engine features a small valve lift. Within the lower partial load range, fuel is injected multiple times, and the fuel-air mixture is ignited multiple times. As a result, the swirl of the fuel-air mixture around the spark plug in the combustion chamber is reduced. 2. Intake camshaft valve lift: The intake camshaft lift of the Mercedes-Benz four-cylinder engine includes two lifting solenoid valves. When the lifting solenoid valve coil is energized, the valve tappet expands and rotates.
8
1
Share

What is the fuel consumption of a 420 horsepower engine with idling air conditioning?

420 horsepower engine with idling air conditioning consumes approximately 10 liters per day. The functions of the air conditioning filter include the following 3 points: 1. Provide fresh air: It prevents the car windows from fogging up, ensuring clear visibility for the driver and safe driving; it supplies fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; it effectively sterilizes and deodorizes. 2. Ensure safety and hygiene: It keeps the cabin air clean and free from bacterial growth, effectively separating solid impurities such as dust, filter powder, and grinding particles from the air; it effectively blocks pollen, ensuring that drivers and passengers do not suffer allergic reactions that could affect driving safety. 3. Adsorb harmful substances: It adsorbs moisture, soot, ozone, and odors from the air, with strong and durable moisture adsorption capabilities.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.