How to remove the small wrench icon on the Chery Arrizo 5 dashboard?
3 Answers
Steps to eliminate the small wrench icon on the Chery Arrizo 5 dashboard: 1. Insert the car key; 2. Press and hold the toggle button without releasing; 3. Turn the car key to the ON position for self-check; 4. Wait for the self-check to complete and the small wrench icon to disappear, while continuing to hold the toggle button. The maintenance indicator displayed on the car dashboard is a reminder that the vehicle requires servicing. Typically, after maintenance, the 4S shop will reset the maintenance light, causing it to turn off until the next maintenance mileage is reached, when it will illuminate again. The Chery Arrizo 5 has a body length, width, and height of 4572mm, 1825mm, and 1482mm respectively, with a wheelbase of 2670mm.
I've been driving a Chery Arrizo 5 for over three years and have encountered that little wrench icon on the dashboard too. It's the vehicle's maintenance reminder light, indicating your car has reached the scheduled service interval for tasks like oil changes or filter replacements. To make it disappear, you must complete the maintenance first - forcibly resetting it without servicing will only degrade your car's performance. After servicing, the reset is simple: with the car parked and ignition off, press and hold the reset button on the dashboard (usually the trip meter reset button), keep holding it while turning the key to the ON position (without starting the engine), wait about 20 seconds, and the wrench symbol will vanish. Never skip actual maintenance just to reset the light - last time I procrastinated for a few days, the engine noise increased significantly and cost me hundreds in repairs. Timely maintenance keeps your car running smoothly and prevents unexpected breakdowns. I recommend checking every six months or 5,000 kilometers - safety comes first.
Buddy, that little wrench icon on your dashboard is the maintenance reminder light, a common sight for Chery Arrizo 5 owners. Here's how to reset it: You must complete the maintenance first. The method is super simple - after turning off the engine, press and hold the reset button on the instrument panel with one hand while turning the key to ACC position (don't start the car) with the other hand. Release when the light goes off. Remember never to reset it before maintenance, or you'll risk engine damage. I always head straight to the 4S shop when the light comes on - spending a little now saves big trouble later. This keeps your car running smoothly and gives you peace of mind on highways. Stick to regular maintenance to avoid costly repairs.
