How to Remove the Small Round Mirror Stuck on the Rearview Mirror?

[Myrtle]

The method to remove the small round mirror stuck on the rearview mirror is: 1. Soak the adhesive around the small round mirror with alcohol; 2. Use a hairdryer to blow hot air, and the small round mirror will fall off. The small round mirror, also known as a blind spot mirror, can broaden the field of vision and is used as an auxiliary configuration for overtaking and lane changing. The functions of the small round mirror are: 1. It allows the driver to better observe the side of the car body and the condition of the rear wheels while sitting in the car, reducing the risk of accidents; 2. It helps to better grasp the road conditions when parking in a garage or reversing; 3. It enables drivers who frequently drive on mountain roads, rugged roads, and narrow sections to more effectively adjust the distance between the right side of the car body and the road.

[GarrettAnn]

I previously encountered the issue of the small round mirror on the rearview mirror being stuck too tightly, which requires careful handling. Typically, these small round mirrors are fixed with double-sided tape, and over time, the adhesive hardens, making it difficult to peel off directly. You can try using a hairdryer to heat the small round mirror for a few minutes to soften the adhesive, then use a plastic card (like an old credit card) to gently pry the edges and slowly peel it off. If there's too much adhesive residue, you can lightly wipe it with a bit of alcohol or nail polish remover, but avoid using strong solvents to prevent damaging the rearview mirror coating. Additionally, when installing a new small round mirror, choose one with a removable adhesive pad and avoid positioning it too far outward to prevent obstructing the main view. The key is to be patient and avoid pulling forcefully, as scratching the rearview mirror surface would be counterproductive. Also, during routine cleaning of the rearview mirror, avoid prolonged water exposure to keep it dry and reduce adhesive aging issues.

[LeTalia]

Once on the highway, I noticed the small convex mirror wobbling and found it quite troublesome to remove. These small attachments become stubborn when glued for too long. Before removal, ensure the car is parked safely with the engine off. Wrap a hot towel around the mirror surface to warm it up for a while; the adhesive will soften and become easier to handle. Then, gently pull the edges with your hand or a rubber tool—avoid using metal objects to scrape. For residue cleanup, I tried wiping with soapy water on a damp cloth, which worked well without damaging the mirror surface. Afterward, I learned my lesson: test different positions before sticking to ensure it aids blind-spot visibility without being glued too firmly. Similar issues arise in rain or snow when the adhesive becomes stickier and harder—opt for weather-resistant tape for replacement. Though small, convex mirrors play a big role, so it's worth handling their removal carefully. Don’t rush and risk damaging the equipment or compromising driving safety.

[ZoeDella]

To remove the small round mirror from the rearview, heat softening is key. Use a hair dryer on medium heat for a few minutes until the adhesive softens, then pull with a soft cloth-wrapped finger. For residue removal, use alcohol-soaked cotton swabs to wipe clean. Adjust the position and stick the new mirror in place.