How to Remove the Small Round Mirror on the Car Rearview Mirror?

[McAnthony]

Methods to remove the small round mirror on the car rearview mirror: 1. Apply alcohol to the adhesive of the small round mirror, wait for a while, and then it can be removed; 2. Nail polish remover can also be used to remove the small round mirror; 3. Use a heat gun to warm the adhesive of the glass film, reducing its stickiness. When heated sufficiently, the small round mirror can be slowly removed. Disadvantages of installing a small round mirror: When using the small round mirror, attention is often overly focused on it. Additionally, due to its small size, it may lead to distorted judgment of the distance to the rear vehicle, potentially causing a rear-end collision with the vehicle in front.

[StEmmanuel]

I often handle car accessories myself, and removing the small convex mirror from the rearview mirror is actually quite simple, but you need to be careful not to damage the mirror. Most small convex mirrors are attached with double-sided tape, so prepare the necessary tools before removal: a hairdryer, a plastic pry tool or an old credit card, and alcohol or adhesive remover. First, park the car securely and turn off the engine to ensure safety. Use the hairdryer to heat the edges of the small convex mirror for a few minutes to soften the adhesive, but don’t hold it too close to avoid overheating. Then, gently pry it up from one corner and slowly peel it off—avoid pulling hard, as this could damage the mirror surface or the car’s paint. If adhesive residue remains, apply a bit of alcohol to clean it off. The entire process takes about 10 minutes, so just be patient. Remember, the small convex mirror is meant to help you see blind spots, but if it’s poorly positioned, it can be more of a hindrance. After removal, you can reattach it to a more suitable spot or simply not use it at all. Before starting, check if it’s a clip-on type—those can be pried off directly, but they’re less common.

[DiConnor]

Safety first. When removing the small convex mirror, avoid injuring yourself or damaging the car. I recommend parking in a shady spot and wearing gloves to prevent accidents. First, identify the type of small convex mirror: most are adhesive-backed. Don’t rush to pry it off forcefully, as the mirror may shatter or leave stubborn adhesive residue. Use a hairdryer on medium heat to warm the edges for about 30 seconds to soften the glue, then gently lift a corner with a plastic tool and peel it off gradually. If you encounter strong resistance, apply more heat. After removal, there may be adhesive marks on the mirror surface—use a cotton swab dipped in alcohol to gently wipe them away. Do not perform this process while driving; ensure the environment is safe. Small convex mirrors are useful for reducing blind spots when reversing, but if they’re old or poorly positioned, they should be replaced. After removal, check that the rearview mirror is intact to avoid compromising driving visibility.

[AshleyLee]

I've removed those small round mirrors several times, and it's quite easy. Just grab a plastic pry tool or an old bank card, first use a hair dryer to heat and soften the glue around the edges of the mirror, then slowly pry it up from the bottom. Avoid using metal tools as they might scratch the mirror. After gently peeling it off, clean any leftover adhesive with alcohol wipes. The whole process takes about 5 minutes—take your time and be patient to avoid damage. Those small round mirrors help you see blind spots, but if they're misaligned, they can actually cause more trouble. After removal, you can adjust their position or replace them.