How to Remove the Small Round Mirror Installed on the Rearview Mirror?

[AshleyRose]

The method to remove the small round mirror installed on the rearview mirror is: 1. Soak the position where the small round mirror's adhesive is attached with alcohol, then use a hairdryer on the hot air setting to blow it; 2. After blowing with hot air, the small round mirror will fall off, and the remaining adhesive can be gently wiped off with alcohol. The function of the rearview mirror is: to reflect the situation behind, beside, and below the car, expanding the driver's field of vision and reducing the occurrence of safety accidents. The method to adjust the rearview mirror is: 1. For the left side exterior rearview mirror, adjust the horizon image inside the mirror to the center of the mirror, and adjust the image of the left side of the car body to occupy one-fourth of the right side of the mirror; 2. For the right side exterior rearview mirror, adjust the horizon image inside the mirror to two-thirds of the mirror's height, and adjust the image of the right side of the car body to occupy one-fourth of the left side of the mirror.

[LeStephanie]

I once installed small convex mirrors on my car and wanted to replace them after a few years of use. The removal process was quite simple: most small convex mirrors are attached to the rearview mirror with double-sided tape. Use a hairdryer set to medium heat and blow on the adhesive area for about 30 seconds to soften the glue. Then, carefully pry the edge with a plastic card like a bank card or a thin piece, and slowly peel it off in one piece. Avoid pulling hard to prevent breaking or scratching the original mirror. After removal, any remaining adhesive residue can be wiped clean with alcohol wipes or household detergent. The original purpose of installing small convex mirrors was to expand the blind spot view, but over time they may become blurry or cause reflective glare. Removing them made driving clearer and safer. It's recommended to clean the mirrors regularly to maintain optimal performance.

[DelElena]

As a car owner, I initially found the small round mirror useful but later got unaccustomed to it. Removing it is easy: simply grab the edge with your hand and gently pull outward. If it's stuck firmly, use a hairdryer to heat the adhesive area for about a minute to soften it, then slowly peel it off. If there's any adhesive residue on the mirror surface after removal, applying some essential balm or soapy water will restore it to a clean, like-new condition. I originally installed it for the convenience of checking the rear of the car, but in actual driving, the distorted view was a bit bothersome. After removing it, I felt much more comfortable. When cleaning the residue, avoid using hard objects to scrape it off to prevent damage. The whole process takes no more than five minutes, making it both convenient and safe.

[AnnaMarie]

To remove the small round mirror, first use a hot air blower to heat the adhesive point for 20 seconds to soften the glue. Then carefully insert a plastic scraper or credit card into the edge to pry it open, proceeding slowly to avoid damaging the mirror surface. Any remaining adhesive residue can be cleaned with 99% isopropyl alcohol or a household adhesive remover. Remember to perform this operation while parked to ensure safety. Although small round mirrors assist in reversing, they can sometimes cause blind spot misjudgment. After removal, consider installing a blind spot camera for more reliable assistance. Safety comes first during the DIY process—don't rush.

[AdrianLee]

Removing the small round mirror after parking is simple: gently pull it by hand or use a thin tool to assist in prying it off. If the adhesive is tight, preheat it with a hairdryer to soften it and speed up the process, avoiding forceful pulling to prevent breakage. Clean residual adhesive with alcohol to prevent light reflection interference. Many people remove it because it deteriorates or affects night vision, ensuring the mirror is intact for better driving safety. Wear gloves for protection during operation, and considering the improved visibility effect, it's worth a try.

[HadleyRose]

Removing the small round mirror is super easy! Choose a warm day for easier removal: heat the adhesive with a hairdryer and then slowly pull it off by hand. Too sticky? Heat it a few more seconds before moving. After removal, clean any leftover adhesive with dish soap or vinegar to leave no trace. I originally installed it to make parking a bit easier, but after removing it, my field of vision widened, making driving more relaxed and enjoyable. The process was quick and effortless, full of fun.