How to Remove the Small Round Mirror from a Sedan?
4 Answers
The method to remove the small round mirror from a sedan is as follows: 1. Use alcohol to moisten the area where the small round mirror's adhesive is attached. 2. Then, use a hairdryer on the hot air setting to blow on it, keeping the hairdryer at a safe distance from the glass. 3. After blowing hot air for a while, the small round mirror will come off, and any remaining adhesive can be gently wiped away with alcohol. Advantages of the small round mirror on the rearview mirror: 1. It allows the driver to better observe the side of the car body and the rear wheels while seated in the car. 2. For beginners reversing, having a small round mirror makes reversing easier, and it helps in observing the relative position of the right wheel during parallel parking. 3. For drivers who frequently drive on mountain roads, rugged paths, or narrow sections, installing a small round mirror enables better observation of road conditions, helping to adjust the distance between the right side of the car body and the road.
I previously removed small round mirrors myself and found they were quite firmly attached. I used a household hairdryer set to medium heat, blowing at the adhesive area for about five minutes to soften the glue, then carefully inserted thin fishing line into the gap to gently pull and peel it off. Finally, I sprayed some alcohol to wipe away the residual adhesive. Be gentle with the movements—don’t rush and risk scratching the mirror glass. I did this because the original position blocked my view, and I wanted to move it to the side for better blind-spot visibility. Here’s a tip: Wear gloves during the process to avoid burns. If the environment is cold, blow a bit longer to soften the glue faster. After removal, don’t install a new mirror immediately—try reversing to get used to the new field of view, ensuring safety before fixing it in place. Be patient throughout the process; don’t rush and damage anything to save time. For stubborn adhesive residue, you can use an adhesive remover for better results.
I really enjoy tinkering with my car. Removing the small round mirror is super easy: just blast it with a hairdryer on hot for a few minutes until the adhesive softens, then gently pry it off with an old credit card edge. Follow up with some alcohol spray on a cloth to clean off the adhesive residue. Work quickly to avoid the glue cooling and hardening, making it difficult to remove. I took it off because after prolonged use, it got dusty and obstructed my view. After repositioning it, my visibility improved significantly. All the tools are readily available at home, saving both money and hassle, but beginners should avoid using sharp objects to prevent damaging the glass. Always park and turn off the engine for safety before starting. After finishing, I used removable adhesive tape to stick it back in a new spot, allowing for easy adjustments anytime. Now, I don’t have to worry about blind spots when reversing in the rain. Just a reminder to everyone: always test the new visibility changes carefully and don’t take it lightly.
I've dealt with small round mirrors multiple times, removing them with heat and gentleness. Use a hairdryer to blow hot air on the adhesive for a few minutes to soften it, then slowly pull apart with a plastic wire, and use alcohol to remove adhesive residue. Avoid hard pulling to prevent mirror breakage, household tools are sufficient. Common reasons include misalignment or old mirrors becoming blurry and needing replacement. Ensure the car is turned off for safety, it's simple and easy to do.
