How to Remove the Seat Belt of BYD Tang?

[JessicaAnn]

BYD Tang seat belt removal method is: 1. Locate the safety buckle wire of BYD Tang and detach the sensor wire; 2. Remove the airbag, find the bolt securing the seat belt, and detach the seat belt buckle; 3. Locate the seat cushion sensor in the seat padding and remove it. The BYD Tang is a mid-size SUV with dimensions of 4870mm in length, 1940mm in width, and 1720mm in height, a wheelbase of 2820mm, and a body type of a 5-door, 7-seat SUV. It features a 6-speed automatic transmission, turbocharged intake, a maximum horsepower of 192ps, and a maximum torque of 320nm.

[BradyAnn]

Removing the seat belt on a BYD Tang, I've done it several times myself and think I can share some practical tips. First, locate the seat belt anchor point on the B-pillar, where there's a plastic cover. Gently pry it open with a small screwdriver, being careful not to use too much force to avoid scratching the interior. Inside, you'll find a fixing bolt, usually with a Phillips or hex head—loosen it counterclockwise with a wrench. Once done, carefully pull out the seat belt webbing, making sure not to tug on the locking mechanism. The entire process must be done with the vehicle turned off, and it's best to disconnect the negative battery terminal for a few minutes to prevent accidental airbag deployment. After removal, cleaning or replacing the belt becomes easy—for example, using mild soapy water to scrub off dust, letting it dry, and then reinstalling. When reassembling, remember to tighten the bolt securely and test its firmness to ensure the seat belt functions properly while driving. I recommend preparing the tools in advance and consulting the official manual or videos for extra safety—DIY is fun, but safety always comes first.

[JasmineMarie]

Regarding seat belt removal, I believe safety is the key point, especially since the BYD Tang has advanced systems, making DIY efforts risky. For example, loosening the fasteners might affect the sensors, leading to failure during emergencies. I usually remind others: first, disconnect the power to avoid short circuits; when removing, observe the bolt positions on the B-pillar; after unscrewing, check the belt for wear, such as cracks or jams, and replace parts promptly if needed. Don’t overlook potential electric shocks or structural damage—it’s best to leave it to professional shops. They can conduct comprehensive inspections at a reasonable cost, which could be life-saving. Simple cleaning can be attempted at home, but when it comes to core safety components, don’t take risks. Develop regular maintenance habits, like checking the buckle function monthly, to reduce the need for removal and save hassle.

[DelSienna]

Stuck or unsmooth seat belts are often the reason for removal. On the BYD Tang, I tried solving the issue directly: pry open the B-pillar cover, loosen the bolts with a screwdriver to remove the belt. Clean debris from the track or lubricate before reassembling to restore functionality. Take your time during the process to ensure parts are back in place. After removal, you can also check for oxidation at the connections to prevent loosening. For quick fixes, DIY is fine; for longer issues, seek professional help. The key is prevention—less disassembly and more maintenance is ideal.