How to Remove the Santa Fe Airbag?

1 Answers
AniyahFitz
07/28/25 7:25pm
Prepare a small flat-head screwdriver. Locate the three small disassembly holes for the airbag at the front left and right positions below the car's steering wheel. Align the screwdriver with the metal strip inside the disassembly hole and push it in to widen the gap on the left side of the driver's airbag. Repeat this method to remove the metal strips on the right and front sides. Pull open the black plastic strip that secures the wiring harness to detach it, then unplug the white horn grounding connector. Disconnect the plug connected to the airbag to complete the airbag removal process.
Was this review help?
7
4
Share
More Forum Discussions

Why is the Santana's air conditioning not cooling?

The reasons why the Santana's air conditioning is not cooling are as follows: 1. Lack of refrigerant: If the air conditioning refrigerant is missing, the air conditioning will naturally not cool. 2. Damaged air conditioning compressor: If the air conditioning compressor is damaged, the refrigerant cannot be effectively compressed and released after entering the compressor, resulting in the air conditioning not cooling. 3. Faulty air conditioning blower: If the air conditioning blower malfunctions, the car will experience symptoms of the air conditioning not cooling or no air blowing. 4. Clogged air filter: If the air filter is clogged, the air produced by the air conditioning cannot blow out, and it will naturally not cool.
1
2
Share

What engine and transmission does the Kia K3 new energy use?

Kia's all-new K3 GT-Line version adopts a 1.4TGDI turbocharged engine. Detailed specifications are as follows: 1. The 1.4T engine delivers a maximum power of 130kw and a peak torque of 211Nm, with a top speed reaching 200KM/H. Thanks to GDI engine's stratified combustion technology that reduces displacement, this gasoline direct injection technology provides the vehicle with superior fuel efficiency. 2. It also features a 1.5L naturally aspirated engine paired with an IVT intelligent continuously variable transmission. This compact engine combined with vigorous power forms the core style of Kia's K-series vehicles.
4
5
Share

How to Open the Malibu Trunk?

Malibu trunk opening methods are as follows: 1. The trunk is opened or closed electrically or via remote control. To open the trunk, simply press the button inside the car or on the remote key, and the trunk will open automatically. To close the trunk, press the close button inside the trunk or the close button inside the car, or use the remote key, and the trunk will close automatically. 2. Remote key control to open the trunk: directly press the trunk opening button on the car key, or press the unlock button to unlock the rear trunk. For models equipped with a smart sensing key, as long as the remote key is within a certain range (usually about 1 meter), pressing the switch on the trunk can directly open the trunk.
20
0
Share

How to Unlock the Engine Lock of Baojun 560?

Baojun 560 engine lock unlocking methods are introduced as follows: 1. Use the remote control to unlock, insert the key after getting in the car to start. If it cannot start normally, it indicates that the anti-theft system is locked, and the key needs to be re-matched. 2. First, disconnect the negative terminal of the battery for a period of time, wait for the engine's protection data to be cleared, and then reconnect the battery. Generally, disconnecting for about 10 seconds is sufficient. If the condition remains the same, it means there was insufficient discharge, and you need to remove it again and wait for some time. 3. Go to a professional repair shop to have a professional inspect it.
12
2
Share

Where is the wiper located in Mercedes-Benz's column shift models?

In Mercedes-Benz's column shift models, the wiper control switch is located on the left side of the steering wheel, integrated with the high beam and turn signal switches. The detailed instructions are as follows: 1. The operation method is relatively simple. If you only want to turn on the wiper, rotate the outermost knob of the control switch forward to adjust to the intermittent mode, first gear, or second gear. 2. If you only need the wiper to work once or at a frequency lower than the intermittent mode, press the outermost button of the control switch. 3. If you need to use the spray function, hold down the outermost button of the control switch to activate the spray function.
9
2
Share

What Causes Engine Jerking?

Engine jerking is caused by clogged fuel lines, excessive carbon deposits, poor fuel quality, and faulty spark plugs. Below are detailed explanations of the causes of engine jerking: Excessive carbon deposits in the throttle valve, fuel injectors, and intake manifold: Many malfunctions are caused by carbon deposits, and some vehicles may experience jerking due to this issue. It is recommended to regularly clean carbon deposits to resolve the jerking problem. Poor fuel quality: Substandard fuel can lead to incomplete combustion. Replacing the fuel can solve the issue. Abnormal ignition: If the ignition is not functioning properly, it is necessary to have the vehicle inspected and repaired at a service center to prevent further safety hazards.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.