How to Remove the Rearview Mirror on a Polo?
3 Answers
Polo rearview mirror removal method: Grasp the rearview mirror and rotate it 90 degrees to detach it. Be careful not to separate the spherical base from the mirror, as it's difficult to reinstall without removing the steel ring. The Polo is a compact car produced by SAIC Volkswagen, with dimensions of 3970mm in length, 1682mm in width, and 1462mm in height, and a wheelbase of 2470mm. The Polo features an efficient and eco-friendly powertrain lineup, including 1.2L TSI and 1.6L TDI turbocharged engines, as well as 1.2L and 1.4L naturally aspirated gasoline engines, offering a total of 7 engine options. All Polo models come equipped with either a 5-speed or 6-speed manual transmission, with some variants offering an optional 7-speed DSG dual-clutch transmission.
Removing the rearview mirror of a Volkswagen Polo requires four steps. First, prepare small tools like a T20 screwdriver and a plastic pry bar. Then, get into the car and remove the door panel trim. Gently pry open the triangular trim with the pry bar to reveal three fixing screws, which can be unscrewed one by one with an electric screwdriver for easier operation. Next, be careful with the connector—press the plastic clip and disconnect the power cable, at which point the entire rearview mirror can be removed. When I last replaced the mirror, I noticed that the clips on the new Polo models are particularly tight, so it’s best to prepare a few spare clips in case they break during removal. The whole process takes about 20 minutes, but after removing the mirror, be careful not to scratch the mirror surface against the door frame. It’s advisable to lay a soft cloth over the work area to protect the car’s paint.
Removing the side mirror involves both exterior and interior operations. On the exterior, first locate the junction between the mirror and the door, then pry open the mirror housing to reveal the internal mounting bracket. The interior door panel also requires attention—use a tool to remove the decorative cover near the handle, unscrew the bolts inside, and gently pull the entire door panel slightly away. At this point, reach inside to disconnect the wiring harness connectors, noting that each plug may have a different release mechanism. After removing the mirror, check if the guide rail slots are deformed. From my experience, newer Polo models tend to develop sticking issues over time—applying some lubricant to the sliding tracks can help. During reinstallation, two people should work together to align the positioning pins correctly; misalignment may cause the adjustment motor to malfunction.
