How to Remove the Rearview Mirror of Baojun 730?

How to Drain Gasoline from a Sedan?

Steps to drain gasoline from a sedan: 1. Drive the vehicle onto a steep slope, then turn off the engine and engage the handbrake, as the car's fuel tank has a U-shaped bottom, making it difficult to drain oil on flat ground; 2. Open the car's fuel tank and insert a plastic hose; 3. Place the other end of the plastic hose in your mouth and suck hard, being careful not to get any oil in your mouth; 4. Once you see the oil coming up, place one end of the plastic hose into a container for the oil and let it drain naturally. This method of draining oil is relatively traditional but cannot completely empty the gasoline. To fully drain the gasoline, you can visit a repair shop or a 4S store to use professional equipment for draining.

8

0

Share

How many cylinders does the Fista have?

Fista has four cylinders, arranged in an inline-four configuration. The cylinder is where the piston performs work, and the more cylinders there are, the more powerful the engine and the larger the vehicle's displacement. The Fista's body dimensions are 4600mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm. The 1.4T engine equipped in this car has a peak torque of 240nm, while the 1.6T engine has a peak torque of 265nm, paired with a 7-speed dual-clutch transmission. In terms of suspension, the front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 10.25-inch color central control screen, Smartphone Interconnection 2.0 system, multiple driving mode selections, ESC body stability control system, and rear side airbags.

9

3

Share

How to Route the Wiring for Installing a Car Dash Cam?

Methods for routing the wiring when installing a car dash cam: 1. Secure the dash cam to the rearview mirror; 2. Connect the power cable to the device and tuck it into the gap between the headliner and windshield; 3. Route the power cable along the A-pillar seam; 4. Continue routing the cable along the door seam toward the bottom of the glove compartment; 5. Once reaching the vicinity of the cigarette lighter, direct the cable toward it and insert the power plug into the cigarette lighter socket. Dash cams are categorized into suction cup-mounted and rearview mirror-mounted types. Suction cup-mounted dash cams need to be affixed to an appropriate location. Rearview mirror dash cams are typically clip-mounted and can be directly attached over the existing rearview mirror.

4

5

Share

Can Test Cars Be Purchased?

Test cars can be purchased. A test car refers to a vehicle used for evaluating various performance metrics of newly developed models before they are officially launched. These tests include crash tests, road tests, water resistance tests, mountain road tests, snowy condition tests, exposure to sunlight, rain tests, high-temperature tests, low-temperature tests, fuel consumption per 100 kilometers, and more. Essentially, it's a method to simulate real-world usage scenarios for future vehicles. If the car has no damage and its engine condition is comparable to that of a brand-new stock vehicle, it may be worth considering. Generally, as long as the invoice and certification are provided, the car can be registered. However, a test car is similar to a used car—it's important to verify what kind of tests it was subjected to. Some are used for engine testing, while others are for chassis testing.

1

Share

What Causes a Car to Rev Without Pressing the Accelerator?

The reasons why a car revs without pressing the accelerator: 1. The throttle cable is not returning to position due to insufficient lubrication. The solution is to remove the cable and pour lubricating oil from the upper end, allowing it to slowly penetrate into the cable tube. 2. The idle motor is stuck or has lost its memory. The solution is to clean or replace it and then re-learn it, which requires using a diagnostic computer for initialization settings. 3. If it's an electronic throttle, the throttle position sensor may be damaged. In this case, the throttle position sensor needs to be replaced. 4. Excessive carbon buildup in the throttle. This situation requires cleaning the throttle. 5. The accelerator pedal is stuck when returning. The solution is to readjust the accelerator pedal.

9

1

Share

How to Solve Brake Lock-Up?

Solutions for brake lock-up: Engage first gear or reverse gear to utilize the vehicle's power to resolve wheel lock-up, but be cautious not to use excessive throttle as it may damage the transmission and other components. If this doesn't work, you can manually turn off the engine, release the handbrake, and kick the locked wheel a few times or rock the vehicle back and forth to resolve the lock-up. Causes of tire lock-up: 1. Absence of ABS (Anti-lock Braking System). Vehicles without ABS are prone to lock-up during emergency braking because the braking force exceeds the friction between the tires and the road, leading to lock-up and potentially causing skidding or even rollover. 2. Prolonged parking, especially after water exposure. When brake pads and drum brakes stick together, they can rust, causing tire lock-up. In such cases, sanding with sandpaper can help alleviate the lock-up.

2

1

Share

How to Remove the Rearview Mirror of Baojun 730?

How to Drain Gasoline from a Sedan?

How many cylinders does the Fista have?

How to Route the Wiring for Installing a Car Dash Cam?

Can Test Cars Be Purchased?

What Causes a Car to Rev Without Pressing the Accelerator?

How to Solve Brake Lock-Up?

How to Reset the Maintenance Light on the BYD Qin?

What is the purpose of a motor vehicle license?

What Causes the Metal Friction Sound When Getting on the Rear Wheel of a BMW 5 Series?

What is the age requirement for obtaining a C1 driver's license?