How to Remove the Rear Seats of the Qashqai?
4 Answers
The method to remove the rear seats of the Qashqai is as follows: 1. Open the rear door behind the driver; 2. Pull up the rear seat forcefully; 3. Pull the unlocking switch of the rear backrest; 4. Move the rear headrest by hand to fold down the rear seat; 5. Open the rear trunk; 6. Remove the screws at the hinge of the rear backrest. The Qashqai is a compact SUV with body dimensions of: length 4401mm, width 1837mm, height 1593mm, wheelbase 2646mm, and fuel tank capacity of 57L. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 111kW at 6000rpm, and a maximum torque of 194Nm at 4400rpm, paired with a 7-speed continuously variable transmission.
Last time I removed the rear seats of my Nissan Qashqai to lay down carpets for cleaning, and found the steps quite straightforward. Start with the seat cushion part—usually there's a small plastic handle or pull strap under the front edge of the seat. Pull it firmly upward while pushing forward to release the clips, then the cushion can be lifted off easily. For the backrest, there might be screws or hidden release levers—look for buttons at the lower back of the seat, press them, and lift upward to detach. The whole process requires no tools, just manual operation. Be sure to clear any debris from the seats before removal to avoid scratching the leather upholstery; wearing gloves can prevent finger cuts. If it feels too tight, don’t force it—try gently shaking or tapping the edges. Once done, cleaning the carpets or adding soundproofing materials becomes much easier. When reinstalling, align the seats to their original position and listen for a click to confirm they’re locked in place, preventing any loosening while driving for safety. The Qashqai’s seat design is quite clever—removing them creates significantly more space, making it much easier to load items.
As someone who frequently works on car repairs, the rear seats of the Nissan Qashqai should be removed following the standard procedure. For the seat cushion: Near the area below the driver's seat, there is a U-shaped pull ring or metal rod. Pull it upward firmly and drag it forward to release the cushion. For the backrest, check the bottom of the seatback—some model years have fixed hooks or rotating latches. Unlock them and lift vertically upward. The key is to use finesse rather than brute force to avoid damaging plastic components. At most, you may need a screwdriver or wrench to handle a few screws. During removal, be cautious of wiring harnesses or sensors under the carpet to prevent accidental disconnection and malfunctions. Once removed, tasks like cleaning or modifications (e.g., adding child seat anchor points, which I often assist owners with) become straightforward. Safety reminder: Ensure the car is parked with the handbrake engaged before starting. Before reassembly, check that all clips are intact and undamaged. Regular removal can help prolong the interior's durability.
I just removed the rear seats of my Qashqai to clean the carpets, and it was super quick to get the hang of. There's a plastic clip or pull cord hidden along the edge of the seat cushion—just press or give it a sharp tug to release it, then lift the whole piece upwards. At the top of the backrest, there are small clips or buttons; unlock them and gently lift to remove it easily. The whole process takes just 5 minutes, no professional tools needed. For cleaning, use a vacuum to suck up dust and then wipe off stains with a damp cloth. A common mistake is forcing the corners of the seat cushion and damaging the lining, so it's best to watch a YouTube demo first to confirm the positions. After removal, the space is super practical—you can even lay out a mat and camp overnight. Regular seat cleaning prevents odors and extends their lifespan. When reinstalling, make sure the clips are properly seated, and take a short test drive to check for stability.
