How to Remove the Rear Seats of the Nissan New Sylphy?
3 Answers
To remove the rear seats of the Nissan New Sylphy: On both sides of the rear seat near the windows, there are handles. Pull these handles to fold the backrest of the rear seat forward. For the seat cushion part, in most cases, you simply need to push the cushion toward the rear of the car and then lift it upward. The body dimensions of the Sylphy are 4631 mm in length, 1760 mm in width, and 1503 mm in height, with a wheelbase of 2700 mm. The Sylphy features front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension. The vehicle is equipped with intelligent engine technology incorporating four cutting-edge technologies, working in synergy with an active grille shutter.
Last time I encountered an owner asking about removing the rear seats of a Sylphy, and the details are still quite clear in my memory. You need to start with the cushion part: locate those plastic clips under the front edge of the seat, then lift the cushion upward with some force until you hear a 'click'—don't be afraid to use strength. Many beginners worry about breaking it, but the Sylphy's design is actually quite durable. After removing the cushion, check the bottom of the backrest, which is usually connected with metal hooks or screws. Use a Phillips screwdriver to slowly unscrew them. The whole process takes about 10 minutes, making it suitable for DIY cleaning or modifications. If the clips are too tight, wiggle them a bit to loosen the tension. Once done, just dust it off and make sure to align everything properly when reassembling—don't skip this step.
I own a new Sylphy and have removed the rear seats a few times. At first, it seemed tricky, but later it became super easy. Just lift the seat cushion straight up—reach under the front edge and pull upward. Sometimes, a bit of a quick burst of force is needed, but don’t brute-force it—remember, it’s held by clips. Once the cushion is off, the backrest is usually effortless; most versions don’t have screws, just lift it away. Older models might have screws at the base, so grab a tool to unscrew them. Doing it yourself saves over a hundred in repair costs and helps you get familiar with your car’s structure. Don’t forget to clean dusty spots to prevent long-term odor buildup. After reassembly, test for sturdiness—safety first when driving.
