How to remove the rear seats of the Hongqi H9?
4 Answers
The method for removing the rear seats of the Hongqi H9 is: Feel for a pull tab under the seat cushion, then pull the tab toward the door direction to release and remove the seat. Taking the 2020 Hongqi H9 2.0T Zhilian Qiyue Edition as an example, its body dimensions are 5137 mm in length, 1904 mm in width, and 1493 mm in height, with a wheelbase of 3060 mm. The curb weight is 1875 kg, and the body structure is a 4-door, 5-seater sedan. In terms of suspension, this model features a double-wishbone independent front suspension and a trapezoidal control arm multi-link independent rear suspension. For powertrain, it is equipped with a 2.0T turbocharged engine, delivering a maximum power of 185 kW and a peak torque of 380 N·m.
I've been repairing cars for over a decade, and removing the rear seats of a Hongqi H9 requires following specific steps. First, ensure the car is turned off and the battery's negative terminal is disconnected to prevent accidental triggering of the safety system. The seat cushion is the easiest part to remove—crouch down and look for plastic hooks at the front of the seat; pull upward firmly to lift it off. The backrest is trickier. Once the cushion is removed, you'll see locks or bolts. Hongqi typically uses hidden clips, with release buttons at the bottom of the backrest or on the trunk side—press these to fold down the backrest. If there are connected wires, like for heated seats, avoid yanking them; use tools to unplug the connectors first. After removal, you can thoroughly clean the dust underneath or modify the space. When reinstalling, align the locking points and press firmly to ensure no rattles. Wear gloves throughout to prevent cuts, and a standard wrench will suffice for the job.
Last year, I wanted to fit a large suitcase into my Hongqi H9, so I decided to remove the rear seats myself. The seat cushion was super easy—just feel for the small protrusion at the front of the rear seat, give it a firm pull, and the whole thing comes up. The backrest took a bit more effort. I had to crawl into the trunk to find the release switch. Hongqi thoughtfully designed it with a small handle—just pull it, and the backrest loosens. Be careful not to be too rough during the process to avoid scratching the leather interior or pulling any wires. After removing the seats, I found a lot of dust underneath, so it was a good opportunity to clean it all up. When reinstalling, make sure each clip snaps into place properly, and test the stability by driving around. For first-timers, wearing knee pads is a good idea—the floor is quite hard, and it saves you the cost of hiring a professional.
When removing the rear seats of the Hongqi H9, don't overlook safety details. For the seat cushion, first pull open the front fixing hooks—just use your hands to tug firmly. The backrest requires locating the release lever or unscrewing bolts in the trunk area. Avoid touching wiring and airbag connection points throughout the process. Always consult the manual beforehand, as Hongqi models may have slight design variations. After completion, check that all locking positions are secure to prevent rattling or looseness. Regular removal and cleaning can extend the seat's lifespan.
