How to Remove the Rear Seats of the Classic Sylphy?

What is the difference between straight-line overtaking and lane-changing overtaking?

The difference between straight-line overtaking and lane-changing overtaking lies in the lanes the two vehicles are in. Below are the relevant details: Straight-line overtaking: Straight-line overtaking occurs when two vehicles are each driving in their own lanes, and the faster vehicle passes the slower one. Lane-changing overtaking: Lane-changing overtaking happens when two vehicles are driving in the same lane, and the rear vehicle changes to another lane before accelerating to pass the front vehicle. Precautions: In regions where driving is on the right, the overtaking lane is the left lane, while in regions where driving is on the left, the overtaking lane is the right lane. Forced overtaking is usually performed when there is oncoming traffic during the overtaking process, which poses the greatest danger. It may result in a collision with the oncoming vehicle or a scrape with the vehicle being overtaken, and the consequences can be severe.

15

0

Share

Is it better to steer early or late when reversing into a parking space?

It is better to steer early rather than late when reversing into a parking space. Below are the key points for reversing into a parking space (using right-side reversing as an example): 1. First point: When the lower edge of the left rearview mirror aligns with the parking line parallel to the left rearview mirror, turn the steering wheel fully to the right. 2. Second point: When the most protruding part of the car body and the right corner of the parking space appear to be two fingers' width apart in the right rearview mirror, turn the steering wheel one full turn to the left. 3. Third point: In the right rearview mirror, when the right corner of the parking space points to the middle of the front door handle, turn the steering wheel fully to the right again. 4. Fourth point: When you see the left rear corner of the parking space in the left rearview mirror, immediately straighten the steering wheel. 5. Fifth point: The stopping point when entering the parking space is when the lower edge of the left rearview mirror is about to align with the parking line parallel to the left rearview mirror.

6

1

Share

What Causes Low Tire Pressure in New Cars?

Low tire pressure in new cars may be due to leaks in the tire or valve stem, which require inspection at a tire shop; deformation of the wheel rim, leading to reduced sealing performance of the tire; thermal expansion and contraction, as manufacturing differences in tires may result in insufficient tire pressure due to temperature changes. Additional information is as follows: 1. Tire Pressure: Tire pressure, strictly speaking, refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car—its failure can lead to the end of the car's life—while tire pressure is akin to the car's blood pressure. The level of tire pressure plays a crucial role in the car's performance and power. 2. Hazards of Low Tire Pressure: Increased friction with the road surface, leading to higher fuel consumption; causes the steering wheel to become heavy and may lead to veering, both of which are detrimental to driving safety; increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage, and excessive friction between the tire and the rim, resulting in damage to the bead area and abnormal wear.

6

5

Share

What are the full names of the gear positions P, R, D, and S?

P stands for Parking gear, R for Reverse gear, D for Drive gear, and S for Sport mode. The specific introductions are as follows: 1. P (Parking) gear: This is a very commonly used gear. When you have parked your car, you must remember to shift into this gear. The parking brake will lock the output shaft, preventing the vehicle from rolling. 2. R (Reverse) gear: This gear can only be engaged when the vehicle is stationary and the engine is idling. 3. D (Drive) gear: In this gear, the car's transmission can automatically shift between various gears. The D gear is the most commonly used driving position. The numbers 1, 2, and 3 following D represent Drive gears 1, 2, and 3, respectively. In this gear, the transmission automatically switches between gears 1 to 3 and does not shift up to gears 4 and 5. It can be used as a limiting gear when traffic is not very smooth, avoiding the skip between gears 3 and 4. 4. S (Sport) mode: In this mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer time to promptly deliver high torque, increasing the vehicle's power for instant acceleration.

18

2

Share

What are the requirements for driving in a straight line?

Requirements for driving in a straight line include the following: The driver must start smoothly and maintain basic operational sequence; Correctly handle the steering wheel, primarily using the left hand, and utilize the steering wheel's free play to adjust the driving direction; Master the timing and methods of gear shifting, and be adept at switching between high and low gears at various speeds; Apply the brake promptly and effectively (anticipatory braking for deceleration); Be capable of performing fixed-point parking and making U-turns at intersections. Additional related information: Pay attention to speed: Maintain a steady speed for straight-line driving. Generally, drive at a moderate speed without exceeding the warning limit to ensure both safety and fuel efficiency. Driving requirements: Keep eyes on the road ahead and be aware of the surroundings. Select a reference point to maintain straight-line driving, adjust direction in time, and always be alert to various traffic situations ahead for timely detection and response.

12

3

Share

What are the new regulations for motorcycle registration in 2018?

2018 new regulations for motorcycle registration: Newly purchased motorcycles can be registered immediately, with a maximum grace period of three months for license plate application. The validity period of temporary license plates generally does not exceed thirty days. There are four types: temporary license plates for administrative jurisdictions, temporary license plates for cross-administrative jurisdictions, temporary license plates for testing purposes, and temporary license plates for special-type motor vehicles. The following are the new motorcycle regulations for 2018: 1. Article 8: Cargo motor vehicles are not allowed to carry passengers except in the driver's cabin and fixed seats approved in the compartment. Two-wheeled motorcycles are not allowed to carry passengers when driving on highways. 2. Article 11: When motor vehicles are driving normally on highways, the minimum speed shall not be less than fifty kilometers per hour. The maximum speed for small passenger vehicles shall not exceed one hundred and ten kilometers per hour; for large passenger vehicles, cargo vehicles, and motorcycles, the maximum speed shall not exceed ninety kilometers per hour. 3. Article 14: When motor vehicles are driving on highways, they shall drive in the traffic lanes. Motorcycles shall drive in the rightmost lane.

10

3

Share

How to Remove the Rear Seats of the Classic Sylphy?

What is the difference between straight-line overtaking and lane-changing overtaking?

Is it better to steer early or late when reversing into a parking space?

What Causes Low Tire Pressure in New Cars?

What are the full names of the gear positions P, R, D, and S?

What are the requirements for driving in a straight line?

What are the new regulations for motorcycle registration in 2018?

How to Turn Off the Auto Start-Stop Function in Nissan Qashqai?

What transmission does the Jeep Compass 80th Anniversary Edition have?

Can I drive with only a photocopy of the vehicle license?

Can I Replace Only the Control Arm Bushing Without Changing the Entire Assembly?